How to Steer the Wheel for Reversing in Subject 2?

1 Answers
LaNora
07/28/25 10:45pm
Reversing into the garage: First reverse to the right, turn the wheel fully to the right and wait to enter the garage. The steering wheel techniques for Subject 2 are as follows: 1. Reversing into the garage: First reverse to the right, turn the wheel fully to the right and wait to enter the garage; straighten the wheel after entering and make minor adjustments, half a turn is sufficient; turn left fully when exiting, keep it steady and shift to reverse gear; return along the original path to straighten into the garage, and exit to the right to complete. 2. Parallel parking: Stop steadily and shift to reverse gear, turn the wheel fully to the right at the point; straighten the wheel when seeing the garage corner, after the rear wheel enters the garage in the left mirror; turn the wheel fully to the left until parallel, turn on the signal light and exit while straightening the wheel. 3. Curve driving: Be cautious in curve driving, adjust frequently with about one turn; steer slightly late to ensure the rear of the car does not cross the line. 4. Right-angle turn: Right-angle turn is the simplest, aim at the point and turn the wheel fully. 5. Hill start and stop: Adjust direction for stopping at the point, make small frequent adjustments to get close to the side.
Was this review help?
18
3
Share
More Forum Discussions

What are the symptoms of a damaged inner ball joint in the steering gear?

The symptoms of a damaged inner ball joint in the steering gear are: 1. Unstable driving direction; 2. Braking deviation; 3. Abnormal noises when turning or on bumpy roads; 4. Steering failure; 5. Wheel lateral throw and detachment during high-speed driving. The causes of damage to the inner ball joint in the steering gear are: The rupture of the dust cover leads to leakage of lubricating grease, and the remaining grease cannot lubricate the frequently moving ball joint. The steering gear, also known as the steering box, is an important component of a car for steering function and a crucial guarantee for driving safety. According to its structural characteristics, it can be divided into: 1. Rack and pinion steering gear; 2. Recirculating ball steering gear; 3. Worm and roller steering gear; 4. Worm and peg steering gear.
19
0
Share

What does the 'w' in motor oil specifications mean?

The 'w' in motor oil specifications indicates that the oil can be used normally in winter. The number before 'w' represents the cold-start performance, with a smaller number indicating better low-temperature fluidity of the oil. The number after 'w' represents the kinematic viscosity of the oil, with a higher value indicating higher viscosity. The functions of motor oil are: 1. To alleviate friction and high temperatures; 2. To cool and reduce temperature; 3. To clean and remove impurities; 4. To dampen vibrations and cushion impacts; 5. To prevent rust and corrosion. Motor oil, also known as engine lubricating oil, is composed of base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives can compensate for and improve any deficiencies in the performance of the base oil.
7
0
Share

How to adjust the rearview mirror on the Classic Sylphy?

The method to adjust the rearview mirror on the Classic Sylphy: 1. Locate the corresponding rearview mirror adjustment buttons on the left side of the center console. Toggle the switch to the right to adjust the right rearview mirror; 2. Toggle the switch to the left to adjust the left rearview mirror; 3. Press the up, down, left, and right buttons respectively to adjust the mirror's angle in those directions. The Classic Sylphy is a compact car under Dongfeng Nissan, with exterior dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm. It is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission.
3
2
Share

How often should a sedan be maintained?

Sedans should be maintained approximately every 5,000 kilometers or every 6 months. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life. Maintenance items include: 1. Replacement of engine oil and oil filter, mainly for the maintenance of the lubrication system, which effectively lubricates various components of the car engine to prevent excessive wear; 2. Replenishment of brake fluid and transmission oil; 3. Spark plugs are consumables and should be checked during each maintenance; 4. Replacement of the air filter to filter the air before it enters the cylinder, removing impurities, dust, sand, and other foreign particles.
3
2
Share

How often should a car be driven when parked for long periods?

Cars should ideally be driven at least once a month under normal circumstances; for vehicles aged 4-5 years, it's recommended to drive them at least once a week. Prolonged parking can lead to tire aging, deformation, and battery drain. Therefore, it's best not to leave a car unused for too long; driving it for about half an hour every week is advisable. Below are some daily maintenance tips for cars: 1. Check the engine oil level: When the engine is cold, remove the dipstick, wipe it clean, reinsert it fully, then pull it out to check. The oil level should be between the upper and lower marks. For a hot engine, turn it off and wait until all the oil has drained back into the oil pan before measuring. 2. Check the coolant level: When the engine is cold, the radiator should be full, and the level in the expansion tank should be between the marked lines. When the engine is hot, the coolant level should be slightly above the upper mark.
4
1
Share

Is It Necessary to Clean the Exterior of the Engine?

Cleaning the exterior of the engine is necessary. The purposes of cleaning the engine exterior are: 1. To keep the vehicle clean and tidy; 2. To reduce the damage caused by corrosive substances to various components of the engine exterior, thereby extending the lifespan of the engine parts; 3. To prevent dust and impurities from entering the engine compartment and forming carbon deposits and gum on the engine surface; 4. To avoid accelerated aging of wiring and rubber components; 5. To prevent engine damage caused by various oxidation processes. Methods for engine maintenance include: 1. Using high-quality engine oil; 2. Using qualified coolant; 3. Regularly cleaning scale from the radiator; 4. Periodically removing carbon deposits from the car; 5. Replacing the car's three filters on time; 6. Maintaining a reasonable engine speed.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.