How to Steer the Wheel for Beginners

2 Answers
Wendy
07/28/25 10:09pm
Introduction to steering for beginners is as follows: First, maintain a proper sitting posture. After entering the car, adjust the seat and rearview mirror, and fasten the seatbelt. Fully depress the clutch with one foot, leaving a slight bend in the knee. The top of the headrest should align with your ears. Second, the correct way to grip the steering wheel. 1. Imagine the steering wheel as a clock face with 12 points. Divide the wheel equally into 12 segments, numbered from 1 to 12 in clockwise order. 2. The "9 and 3 o'clock" grip method. Holding the wheel at 9 and 3 o'clock positions allows maximum rotation of 270 degrees per turn while ensuring precise control. When turning, steer fully left or right, then return the wheel proportionally. This helps develop spatial awareness. 3. Practice quick steering maneuvers. For a right turn, push with the left hand and pull with the right. When the left hand reaches the 3 o'clock position, the right hand naturally moves to 9 o'clock - this achieves 180 degrees of rotation. Keep practicing full left turns followed by straightening, and full right turns followed by straightening until the movements become fluid.
Was this review help?
6
1
Share
DelDiana
08/12/25 2:42am
I remember being terrified of steering when first learning to drive, always afraid of over-rotating and rolling the car. My instructor said the key is holding the wheel at the 9 and 3 o'clock positions - this keeps arms most relaxed and agile. The push-pull technique works best for turns: for a left turn, push up with your right hand while the left hand slides down to 6 o'clock, then switch hands to continue. Never cross your arms, as that causes panic during sharp turns. When driving straight, avoid death-gripping the wheel; maintain light contact. Practice in empty parking lots, starting with 90-degree turns before progressing to 180-degree maneuvers. The wheel self-centers after turns - just guide it back with the momentum. Most importantly, look where you want to go, and your hands will naturally follow. After several drives, muscle memory takes over.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

Can the car still be driven if the engine is shaking?

If the engine is shaking but the malfunction indicator light is not on, you can continue driving, but it is advisable to drive at a lower speed and proceed to a repair shop as soon as possible to diagnose the cause of the shaking. However, if the car shakes violently and the malfunction indicator light is on, you should stop immediately and call for assistance. Possible causes of engine shaking include: 1. Engine misfire: One or more cylinders are not functioning properly; 2. Worn or loose engine mounts; 3. Carbon buildup issues: Including carbon deposits in the cylinders, throttle body, spark plugs, or intake system; 4. Fuel system problems: Using an incompatible fuel grade can reduce engine output and performance.
11
3
Share

What Causes Shaking When Starting an Automatic Car?

The reasons for shaking when starting an automatic car are: 1. A dirty throttle body causing uneven air intake and uneven operation leading to shaking; 2. Clogged fuel lines causing insufficient fuel supply at low throttle, resulting in uneven operation of engine cylinders and shaking; 3. Transmission malfunction preventing normal operation. The correct steps to start an automatic car are: 1. Turn the ignition key to the power position to initiate the car's computer system self-check for about 6 seconds; 2. Press the foot brake and shift the gear from P to N, then turn the ignition key to the start position to fire up the engine after releasing the foot brake; 3. Press the foot brake, release the handbrake, shift from N to D gear, and slowly release the foot brake.
6
3
Share

How Often Should You Change the Oil for a Sedan?

Different types of motor oil have different replacement cycles. Mineral oil can be changed every 5,000 kilometers or 6 months; semi-synthetic oil can be changed every 7,500 kilometers or within 6 months; and full-synthetic oil can be changed every 10,000 kilometers or 12 months. The steps for changing the oil are as follows: 1. Run the engine until it reaches operating temperature; 2. Engage the handbrake and lift the vehicle; 3. Unscrew the oil filter and drain the old oil; 4. Apply new oil to the gasket of the new filter; 5. Pour the new oil into the oil pan; 6. Check the lower part of the engine for leaks; 7. Lower the vehicle, check the oil dipstick, and start the engine; 8. Turn off the engine and recheck the oil level.
14
0
Share

How to replace the battery of Zotye T700 remote key?

The method to replace the battery of Zotye T700 remote key is: 1. Use a small flat-head screwdriver to pry open the back cover of the key and remove it. After opening the back cover, you can see the old battery; 2. Remove the old battery and install the new battery into the slot. When installing the battery, pay attention to the positive pole facing downward; 3. Reinstall the back cover of the key according to the original steps. Taking the 2018 Zotye T700 as an example, its body structure is a five-door five-seat SUV, with body dimensions of length 4748mm, width 1933mm, height 1697mm, a wheelbase of 2850mm, a fuel tank capacity of 64L, and a curb weight of 1787kg.
3
1
Share

How to Replace the Air Conditioning Filter in Changan CS55

The method to replace the air conditioning filter in Changan CS55: 1. There is a black plastic panel above the passenger side footwell with two retractable clips; remove the panel by releasing these clips. 2. Disconnect the negative terminal of the battery, then remove the body control module and its mounting bracket. 3. Remove the panel on the left side of the passenger footwell, which is secured with four screws. If the filter is very dirty, clean it by blowing compressed air from the opposite side. Hold the air gun about 5cm away from the filter and blow at 500kPa pressure for approximately 2 minutes. The air conditioning filter tends to accumulate a lot of dust. Use a blower or high-pressure air to remove the loose dust. Do not wash it with water, as this can easily damage the filter.
13
4
Share

Why is the car front fog light not working?

Car front fog light not working reasons are: 1. The bulb current is too large, causing the switch to overheat; 2. Poor contact of the ground wire; 3. The plug is contaminated with mud or water. Car fog lights should be turned on when driving at night without street lights, poor lighting, or encountering low visibility conditions such as fog, rain, snow, dust, or hail. The methods to turn them on are: 1. Rotate the light control lever located below the left side of the steering wheel; 2. Press the fog light button near the instrument panel. Precautions for using car fog lights are: 1. When visibility is below 100 meters, fog lights must be turned on and speed should be reduced; 2. When visibility is below 30 meters, turn on the fog lights, pull over, and activate the hazard warning lights; 3. In rainy, foggy, snowy, or dusty weather, turn on the fog lights and reduce speed.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.