How to Steer the Wheel Correctly?

1 Answers
WalterAnn
07/30/25 4:06am
There are several techniques to learn for steering the wheel correctly. Here are the learning techniques for steering the wheel correctly: 1. Technique One: Imagine the steering wheel as a clock, with your left hand holding at the 9 o'clock position and your right hand at the 3 o'clock position. The four fingers should curl from the outside inward, while the thumb naturally extends straight. 2. Technique Two: When steering, avoid crossing your hands. Instead, alternate them. As your right hand is about to touch your left hand, quickly adjust the position of your left hand, and vice versa. 3. Technique Three: If you forget how many turns you've made on the steering wheel, gently press the accelerator to observe the wheel's direction and make adjustments accordingly.
Was this review help?
2
3
Share
More Forum Discussions

Is it necessary to press the brake when shifting to L gear?

L gear is equivalent to the speed range between first and second gear in a manual transmission. There is no need to shift to L gear when the engine speed is high. However, when driving at low speeds, such as around 20 km/h, it is perfectly fine to directly shift into L gear. Similarly, when going uphill, you can shift from L gear to D gear without pressing the brake - just shift directly. Below are some relevant information about gears: 1. When in L gear, the transmission will stay in first gear and not upshift. It can be used in situations like climbing slopes. It also provides some braking function when going downhill. Some cars have a D2 gear, called low-speed forward gear, which is used for bad roads or off-road conditions. Generally, low gears can be used when climbing steep slopes or starting on inclined surfaces. The principle is that by shifting to this gear, you can limit the car's automatic gear shifting to only low gears (equivalent to first and second gear in a manual transmission car), ensuring the car obtains maximum forward power. 2. L gear is a limiting gear and is best used at low speeds. When shifting from D gear to L gear, if the current speed is higher than what first gear requires, it will automatically switch to the corresponding gear (such as L3 or L4 gear, with the corresponding value displayed after the L gear on the information screen). If shifting to L gear at low speeds, it may be L1 gear. If you need to increase the gear, press the '+' button on the left side of the gear lever to shift to the desired gear. Similarly, if the gear is too high, press the '-' button to lower it to the appropriate gear. When climbing steep slopes or driving on snow, shifting to L gear can enhance the car's climbing and passing ability. During long downhill drives, shifting to a lower L gear can use engine braking to limit speed, reducing the safety risks associated with frequent braking in D gear. This has the same effect as downshifting in a manual transmission when going downhill. 3. L gear can also be used for prolonged low-speed driving in urban areas, such as when following traffic. Firstly, it can reduce engine speed, preventing the engine and transmission from overheating. Secondly, it reduces frequent start-stop intervention, as start-stop only works in D gear and not in L gear. During normal driving, use D gear, as at the same speed, fuel consumption in L gear is higher than in D gear.
7
5
Share

How to Turn Off the Auto Start-Stop Function in Buick Excelle?

The start-stop system button can be found either on the vehicle's center console or in the button area behind the gear lever. The function is enabled by default when the vehicle leaves the factory, which means the "yellow light is off". Pressing this button will "turn on the yellow light" and deactivate the start-stop function. If the vehicle detects child misuse or other irregular operations, it will automatically shut down for the safety of both the vehicle and occupants.
6
5
Share

How to Reset the Maintenance Light on Honda Lingpai?

Turn on the vehicle and locate the "A" button. Press and hold the "A" button while stepping on the brake pedal. Do not start the engine, but ensure the vehicle's power is turned on. After performing the above steps, observe the vehicle's dashboard. If the dashboard or characters start flashing, proceed with the next steps. Continue holding the reset button "A" until "..." appears on the display screen. Release the brake pedal and let go of the "A" button. The maintenance light reset operation is now complete. Turn off the power.
6
0
Share

How Does Insurance Compensation Work When You Are Fully at Fault for a Car Scrape?

When a scrape occurs with another vehicle while driving, the first thing to do is to turn on the hazard lights and get out of the car, placing a warning triangle at a certain distance behind the vehicle. Immediately take out your phone to take photos for evidence. Generally, you need to take photos of the front and rear of both vehicles, as well as photos of the damaged parts of both vehicles, to determine who is at fault. After determining liability, the party primarily at fault should call the insurance company's customer service to report the claim. After verification, the insurance company will arrange for a designated agent to contact the person reporting the claim.
18
3
Share

What is the most effective method to remove car odors?

Regularly open the car windows for ventilation. After getting in the car, open the windows and turn on the fan to circulate air. Drive for at least 10 minutes before closing the windows and turning on the air conditioning. Bamboo charcoal bags can be somewhat effective, but they need to be replaced promptly. Typically, a bamboo charcoal bag should not be used for more than 15 days, otherwise, it may become a new source of pollution. Placing fruits like bananas or pineapples in the car can also help eliminate odors. Place them in a spot away from direct sunlight and monitor them to prevent leakage or spoilage. Fill a small bucket with water and add some vinegar. Place it in the car and repeat the process a few times to eliminate odors.
12
0
Share

Are there any issues with purchasing car insurance after it has lapsed?

There is no impact on renewing car insurance after it has lapsed, except for certain effects on the premium, and the vehicle must not be driven on the road during the lapse period, otherwise penalties will be imposed. Relevant information is as follows: 1. There is an impact on purchasing insurance after the car insurance has lapsed. The extent of the impact depends on how long the insurance has lapsed and the relevant regulations of each insurance company. 2. For PICC Property and Casualty, if the insurance lapses for more than three months, the normal discount (in the case of no claims) will not be available, and the premium will be higher. If the lapse is within three months and there are no claims, the premium will still have a discount. If the car has had claims in the first half of the year, the number of claims will be considered. It is important to note that it is best not to let the car insurance lapse, as the risks are significant and very unfavorable for the vehicle. It is recommended to purchase car insurance in advance.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.