How to Steer the Steering Wheel When Encountering a Turn?

1 Answers
LeBrooklyn
07/30/25 12:19am
When encountering a turn, steer the steering wheel towards the side where the rear wheels are sliding. Once the vehicle returns to a straight driving direction, straighten the steering wheel and continue driving. Below are specific details about the steering wheel: 1. Proper Grip: Correctly grasp the steering wheel by imagining it as a clock face. The left hand should be positioned between the 9 and 10 o'clock positions, and the right hand between the 3 and 4 o'clock positions. In the event of a collision, this posture provides better support for the body, ensuring driving safety. 2. Working Principle: The steering wheel is a wheel-shaped device used to control the direction of vehicles such as cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and installation clips or screw holes corresponding to the driver's airbag (DAB).
Was this review help?
5
5
Share
More Forum Discussions

Can an Automatic Transmission Be Converted to Manual?

Automatic transmissions cannot be converted to manual. The differences between automatic and manual transmission vehicles are: 1. Different transmissions: Automatic transmission vehicles use automatic transmissions; manual transmission vehicles use manual transmissions. 2. Different driving methods: Automatic transmission vehicles can automatically switch to the required gear; manual transmission vehicles require manual gear shifting. An automatic transmission means the driver does not need to shift gears manually; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. A manual transmission refers to manually moving the gear lever to change the gear engagement device inside the transmission, altering the gear ratio to achieve the purpose of shifting.
15
4
Share

What does 185/70r1492h on tires mean?

The 185 in tire 185/70/r14-92h represents a tire width of 185mm; 70 indicates the aspect ratio of the tire section is 70%, meaning the section height is 70% of the width; R refers to radial tires, 14 means the rim diameter is 14 inches; 92 represents the load index of the tire, indicating a maximum load capacity of 630kg; h denotes the speed rating of the tire, supporting a maximum speed of 210km/h. The following are precautions for tires: Regularly correct wheel balance: Excessive wheel imbalance will cause high-frequency oscillations at high speeds, leading to uneven tire wear and compromising driving safety. After tire repair, dynamic balance testing and adjustment should be performed, with the single-side dynamic balance test value of the tire being less than or equal to 40 grams. Increase awareness of tire safety: Regularly inspect tires, especially before highway driving, ensuring thorough and detailed checks. Besides tire pressure, observe the tire sidewalls for cracks and the tread wear condition. Any potential hazards should be promptly addressed.
4
1
Share

What happens if a car fails to undergo annual inspection after the deadline?

Vehicles without annual inspection are not qualified to be driven on the road. If they continue to be driven, they will be subject to penalty points and fines if caught. The following are relevant introductions: 1. Regulations: Motor vehicles should undergo annual inspection within a fixed period each year. If the annual inspection is overdue, the vehicle owner will be fined, and the driver's license will be deducted 3 points. In addition, the motor vehicle will be detained. According to the provisions of Chinese law, unqualified vehicles in the annual inspection should be repaired within a time limit. If they are still unqualified after the deadline, the vehicle management office will confiscate their driving license and prohibit them from continuing to drive; vehicles that fail to participate in the annual inspection or fail the annual inspection without reason are not allowed to drive on the road, nor are they allowed to transfer registration. 2. Article 4: If the motor vehicle inspection qualified mark is not obtained within 3 consecutive inspection cycles after the expiration of the inspection validity period, the vehicle will be forcibly scrapped.
15
5
Share

Does Parking Ventilation Damage the Battery?

Parking ventilation does not damage the battery, but it increases engine pressure and fuel consumption. Relevant details are as follows: 1. Definition of parking ventilation: It refers to blowing natural outside air into the car without starting the compressor. When the car has been exposed to the sun all day in summer and the temperature inside is high, you can use your phone to activate parking ventilation in advance to lower the interior temperature. 2. Taking BMW as an example: BMW's parking ventilation system is an auxiliary function designed to prevent excessively high interior temperatures when the driver enters the car in summer. When this function is used, the vehicle monitors the interior temperature. When the temperature reaches a warning level, the air conditioning system will ventilate the interior to reduce the temperature.
20
1
Share

Where is the left front fender located on a car?

The left front fender is located on the outer body of the left wheel, specifically the semicircular area directly above the tire. Here are the relevant details: 1. Function of the fender: During vehicle operation, it prevents sand, stones, and mud stirred up by the wheels from splashing onto the underside of the cabin. Typically installed above the vehicle's wheels, it serves as the outer panel on the side of the vehicle and is usually made of resin-molded fender types. 2. Classification by installation position: Fenders are divided into front fenders and rear fenders. The front fender is installed near the front wheel and must ensure sufficient space for the wheel's maximum turning and bouncing limits. The rear fender does not face issues of wheel contact but is designed with aerodynamic considerations, featuring a slightly arched curve and outward protrusion.
15
0
Share

Is the Juwang Power Engine Independently Developed?

Juwang Power Engine is independently developed. Juwang Power is the latest powertrain platform brand released by GAC. As a powertrain platform, it encompasses two major areas: complete engines and transmissions. The specific details are as follows: 1. Juwang Power Engines: Covering three platforms—1.5L, 2.0L, and DHE. Among them, the third-generation engine achieves a thermal efficiency exceeding 40%, with a power output of 100kW/L and torque of 200Nm/L. The fourth-generation engine boasts an even higher thermal efficiency of 42.1%, representing the leading level of thermal efficiency in gasoline engines worldwide. 2. Transmission Field: It includes three platforms—WDCT, AT, and DHT—all equipped with GAC's pioneering electro-hydraulic control system. The application of dual-clutch modules, electronic pumps, and mechanical pump dual-pump technology delivers faster shift response, more precise shift control, and higher transmission efficiency.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.