How to start the Trumpchi GS4 when the key fob battery is dead?

3 Answers
DiKhloe
07/29/25 3:11pm
Trumpchi GS4 key fob dead battery starting method: For vehicles equipped with a one-button start system, simply place the key near the steering wheel. The car will detect the key, and then you can press the start button to ignite the engine. When the car key battery is depleted, it should be replaced immediately to avoid inconvenience in normal vehicle usage. The Trumpchi GS4 is positioned as an international new-generation SUV, featuring a 1.5-liter four-cylinder turbocharged engine across all variants. In terms of body dimensions, the Trumpchi GS4 measures 4510mm in length, 1852mm in width, 1708mm in height, with a wheelbase of 2650mm.
Was this review help?
20
0
Share
SophiaDella
08/13/25 7:53am
As a car enthusiast, I've found a fixed method to start the GAC GS4 when the key fob battery dies: First, locate the small mechanical key hidden inside the remote—press the button to release it, then use it to unlock the door and enter the driver's seat. Next, to start the engine, the key step is placing the key near the start button area—in my car, there's a sensor mark beside the center console cup holder. Hold the key against it for a few seconds, then press the start button to ignite the engine. For daily maintenance, I recommend replacing the battery every two years—just use a CR2032 model to avoid sudden power loss inconveniences. It's also wise to keep a spare key in your wallet for emergencies. Pay attention if the key's indicator light dims—replace the battery promptly to prevent unexpected breakdowns on the road.
Was this review help?
13
5
Share
Expand All
Jon
10/11/25 7:01am
My family also drives a GAC GS4, and last time when the key fob ran out of battery, it really freaked me out! Don’t worry, it’s easy to fix in just a few steps: pull out the small metal head of the key, unlock the door and get in, then place the remote near the steering wheel or the dashboard sensor area, and press the start button—I heard this is called the emergency start mode. After that, I’ve made it a habit to regularly test the key’s response by pressing it to see if the light turns on. The batteries cost just a few bucks and you can buy a bunch to keep as spares—it’s worry-free and safe, especially when it’s dark outside. Don’t forget to turn on the hazard lights to alert other drivers.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What documents are needed to apply for a temporary license plate for a new car?

Documents required to apply for a temporary license plate for a new car: 1. Original and photocopy of the vehicle certificate of conformity; 2. Original and photocopy of the third copy of the compulsory traffic insurance; 3. Original and photocopy of the first copy of the car purchase invoice; 4. Original and photocopy of the owner's identity proof; 5. For non-local owners, original and photocopy of the owner's temporary residence permit. After gathering all the required documents, go to the traffic management department to fill out the temporary license plate application form, then submit the application at the counter and receive the temporary license plate. There are four types of temporary license plates: temporary license plates for cross-administrative districts, temporary license plates for administrative districts, temporary license plates for special-type motor vehicles, and temporary license plates for testing purposes.
3
0
Share

How to Remove Paint Dots from Car Body?

Methods for removing paint dots from car body: 1. Use a mixture of soap, ammonia, and turpentine in appropriate proportions to remove many stains from glass; 2. Repeatedly stick and peel transparent tape to remove some stains; 3. Use a 4B drawing eraser to wipe off the paint; 4. If possible, use a dedicated cleaner for wiping; 5. First, use a hair dryer to dry the area, then scrape it off; 6. Alcohol can also be used for removal—dip a soft cotton cloth in alcohol and gently wipe the paint; 7. Banana oil can also be used—dip a towel in banana oil and gently wipe the paint dots to dilute the paint, which is highly effective for cleaning paint spots. Finally, rinse with clean water.
9
0
Share

Where is the blower resistor located in an Audi A4?

The blower resistor is located inside the blower assembly in the cabin and serves as a switch to regulate the fan speed. Function of the vehicle blower: When the blower is turned on, if the temperature is set to the lowest setting, the external circulation mode will draw in natural air from outside the vehicle, though slightly warmer. The air intake for the external circulation is typically located between the windshield lower edge and the engine compartment, which introduces some heat from the engine bay. In internal circulation mode, the air blown out will be at the temperature of the cabin. Components of the vehicle blower: The blower mainly consists of the following six parts: motor, air filter, blower body, air chamber, base (also serving as the oil tank), and oil drip nozzle.
1
4
Share

What are the reasons for insufficient battery power in Volkswagen vehicles?

Volkswagen battery power insufficiency can be attributed to vehicle quality issues and personal usage problems. Personal usage problems: Short driving distances leading to insufficient battery charging, prolonged use of high-power electrical appliances, and electrical devices left on after the vehicle is locked. Vehicle quality issues: Battery quality problems resulting in insufficient power storage, short circuits or open circuits between battery poles, loose battery terminal clamps, vehicle body leakage. Regarding the issue of indicator lights being on, since the actual vehicle cannot be seen, an accurate fault diagnosis cannot be made. If this problem is not resolved through this answer, it is recommended to report it to the manufacturer and wait for their response and handling.
10
2
Share

What are the causes of oil leakage from the oil pan of a BMW 525 engine?

BMW 525 engine oil pan leakage can be caused by aging seals, insufficiently tightened oil pan screws, and severe external impact collisions. Poor sealing or aging of the gasket or sealing strip: Sealing strips exposed to high temperatures for extended periods can age, leading to cracking, which makes oil leakage a common occurrence. Insufficiently tightened oil pan screws: If the oil pan screws are not tightened sufficiently, the seal between the engine block and the oil pan deteriorates, resulting in oil leakage from the oil pan. Severe external impact collisions: After a severe external impact collision, the sealing performance of the oil pan may degrade or the pan may crack, leading to oil leakage.
20
2
Share

Why does the Subaru Outback key light stay on?

Subaru Outback key light stays on due to an anti-theft system malfunction. Fuel warning light: When this indicator light stays on, it indicates low fuel level and it's best to refuel promptly. During vehicle startup when the system performs self-check, this light will illuminate briefly before turning off. To preserve fuel pump lifespan, refueling should ideally occur before the fuel warning light activates. Door open indicator: If any door isn't properly closed, the corresponding indicator light on the display will illuminate. Seatbelt indicator: The seatbelt indicator on the car dashboard shows whether seatbelts are locked. When illuminated, it means seatbelts aren't properly fastened. Some models will emit warning sounds. The indicator automatically turns off when seatbelts are properly fastened.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.