···
Log in / Register

How to Start the BYD Song?

4 Answers
OJayce
07/29/25 11:58am
To start the BYD Song, first, look around the vehicle to ensure safety before opening the door. Make sure the gear is in the parking position, press the brake pedal, and then press the one-button start key. Let the vehicle idle for about 30 seconds and check if any warning lights on the dashboard are abnormal. If everything is normal, shift to D gear to start moving. Precautions after starting are as follows: 1. Watch for obstacles: Carefully inspect the surroundings of the vehicle before starting, checking for any obstacles under the car or around the body. Cold starts require preheating the engine, with the preheating time depending on the temperature; generally, you can start once the idle speed returns to normal. Always remember to fasten your seatbelt and check if the driver's seat and rearview mirror positions are appropriate—adjust them if necessary. 2. Maintain a good sitting posture: A proper sitting posture isn’t just for show; it’s closely related to safe driving and comfort. A good posture requires the driver to rest their hands naturally on the steering wheel, with their back lightly touching the seat, eyes looking straight ahead, and feet naturally placed on the pedals. Avoid hunching over while driving. Sit facing the center of the steering wheel, with the weight of your wrists naturally resting on it, leaving enough room for movement in your elbows and knees. 3. Adjust the side mirrors: When adjusting the mirrors, your body should be in a natural driving position. Position the interior rearview mirror so that the scene is centered, showing a small part of your vehicle’s rear to help judge the distance and position of other vehicles. Adjust the side mirrors so that the horizon is centered horizontally, with a small part of your car’s body visible.
Was this review help?
6
3
Share
MacXavier
08/13/25 9:28pm
Starting the BYD Song is actually quite simple. My usual first step when driving is to make sure the car is in the P position, then firmly press the brake pedal with my right foot. Locate the round start button next to the steering wheel and press it gently; the engine will roar to life within seconds. Remember, pressing the brake is key—otherwise, the button won't respond, as I've learned from experience. After starting, don't rush to drive off; first, check if the dashboard indicators are lit and ensure the RPM stabilizes in the middle range to confirm everything is normal. This car uses a keyless system, so the key must be carried with you, either in your pocket or bag, as it automatically senses proximity to the door. Getting the sequence wrong can easily cause malfunctions, so beginners might want to practice a few times to develop the habit and avoid mistakes. Starting the car is the foundation of driving—master it, and daily commutes become much easier.
Was this review help?
11
1
Share
Expand All
OIsaac
10/08/25 7:41am
To start the BYD Song, first shift the gear to P position, which is a safety prerequisite. It's important to press the brake pedal, then press the start button, and the engine will start. Don't forget that the key must be nearby inside the car, as it needs to be sensed to work. I always make it a habit to wait a few seconds after starting, letting the engine fully warm up before releasing the brake and shifting gears to prevent sudden stalling. Once started smoothly, the running lights will automatically turn on; check if the dashboard displays normal status. If there's an issue, such as the button not responding, it might be due to a dead key battery—check that first. Take your time with the whole process, ensuring safety comes first.
Was this review help?
9
3
Share
Expand All
ChristianDella
11/22/25 2:13am
To start the BYD Song, first ensure the gear is in P, press the brake pedal all the way down, then press the start button to ignite the engine. Keep the key with you, and the system will automatically sense it when successful, indicated by the light. After starting, wait a few seconds for the engine to stabilize before driving. Simple, right? With regular practice, it will become second nature.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What does atsmode mean?

ats-mode refers to the driving mode switching function. Here are the related introductions: 1. Comfort mode: Comfort mode is generally the daily driving mode, tuned for minimal gearshift jerks and lower fuel consumption. 2. Economy mode: If driving on highways, switching to economy mode makes the car more fuel-efficient, but for overtaking on highways, it is recommended to use comfort mode. Economy mode is suitable for stop-and-go traffic conditions in urban areas. 3. Sport mode: Cars with sport mode are mostly sports sedans or coupes. Sport mode is the S gear of the car, which can be switched freely during driving, allowing the transmission to shift freely. However, in sport mode, gear shifts may have a certain delay, and the engine maintains high RPMs for a longer time, thereby achieving greater output power. Sport mode is typically used for climbing slopes and quick overtaking.
15
1
Share

What Causes a Dry, Rough Friction Sensation in the Accelerator Pedal?

The cause of a dry, rough friction sensation in the accelerator pedal may be due to damage to the car engine mount. It needs to be replaced promptly. Below is detailed information about car engines: 1. Overview: A car engine is the device that provides power to the vehicle, determining its performance, fuel efficiency, stability, and environmental friendliness. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid power systems. 2. Others: Common gasoline and diesel engines belong to the reciprocating piston-type internal combustion engines, which convert the chemical energy of fuel into mechanical energy for piston movement and output power. Gasoline engines have higher rotational speeds, lighter weight, lower noise, easier starting, and lower manufacturing costs. Diesel engines have higher compression ratios, better thermal efficiency, and superior fuel economy and emission performance compared to gasoline engines.
11
2
Share

Where is the USB port on the 2021 Chery Ant?

2021 Chery Ant's USB port is located on the left side of the driver's seat. You can open it by pulling down a handle. The functions and usage precautions of the USB port are as follows: Functions of the USB port: The USB port in the car is an expansion interface that can be used to connect external electrical devices. The main functions of the car's USB port are: using the car's standard power supply to charge DC-5V electrical devices via the USB interface or serving as a fixed power supply interface for electrical devices. Precautions for using the USB port: Charging should only be done when the car engine is running to avoid damage to electrical devices due to unstable power supply; Do not connect too many electrical devices to prevent overloading and damaging the car battery and generator; Avoid using it during thunderstorms to prevent lightning strike accidents.
9
5
Share

How long does it take to replace a bumper at a 4S shop?

With prior appointment, replacing a bumper at a 4S shop takes about one hour. Below is detailed information about car bumpers: 1. Overview: The front and rear ends of a car are equipped with bumpers, which not only serve decorative purposes but more importantly function as safety devices that absorb and mitigate external impacts, protecting the car body and the safety of passengers. Car bumpers consist of an outer panel, cushioning material, and a crossbeam. 2. Others: The geometric shape of the bumper must consider both its consistency with the overall vehicle styling to ensure aesthetics, as well as meet mechanical and energy absorption characteristics to ensure vibration absorption and cushioning during collisions. From a safety perspective, bumpers provide a buffer effect during low-speed collisions.
1
1
Share

Should You Wipe Your Car After It Rains?

After being exposed to rain, it is advisable to wipe the car, and it's even better to wash it thoroughly. The reasons are explained below: 1. Overview: Washing the car is not just because it's dirty, but also to protect the paint. Rainwater can form droplets, and applying an oily protective film on the paint surface can prevent rainwater from directly corroding the paint. Conversely, if rainwater forms a film directly on the paint surface, it will not only make the car dirtier but also accelerate the erosion of the car's paint by acid rain. 2. Additional Notes: Rain contains various harmful substances. Once absorbed by dust and dirt, acid rain can easily corrode the car's paint. Moreover, the muddy water on the car's body, when exposed to sunlight, can increase the surface temperature of the car, leading to gradual corrosion of the paint surface.
3
4
Share

What is the Engine Oil Viscosity Grade Chart?

The viscosity grade of engine oil is closely related to the vehicle model and local temperature, indicating the ambient temperature. Specific details are as follows: 1. Vehicle Model: Japanese cars primarily use low-viscosity oil, while German cars prefer high-viscosity oil. 2. Grades: (1) 0W suitable temperature — -35°C (polar regions). (2) 5W suitable temperature — -30°C (northeast and northwest regions). (3) 10W suitable temperature — -25°C (north-central and southwest regions). (4) 15W suitable temperature — -20°C (north-central and southwest regions). (5) 20W suitable temperature — -15°C (areas south of the Yellow River and north of the Yangtze River). (6) 25W suitable temperature — -10°C (subtropical regions).
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.