···
Log in / Register

How to Start the Boyue Automatic Transmission?

6Answers
DiGraham
07/28/2025, 11:10:24 PM

Automatic transmission models come with a one-button start function. The method to start the Boyue automatic transmission is as follows: 1. With the car in a stationary state, first press the clutch pedal and then press the start button, at which point the engine will ignite and start. 2. Then, shift the car into D gear. 3. Next, release the handbrake and then the brake pedal. 4. You can gently press the accelerator. One-button start models allow you to turn off the engine while driving. In case of an emergency while the car is in motion, you can turn off the engine by pressing the engine start/stop button for more than 3 seconds or pressing it three times consecutively. At this point, the car's power will switch to the ACC state.

Was this review help?
112
Share
ClaytonLee
08/12/2025, 09:30:52 AM

When I first drove the automatic transmission Boyue, I had to start from the basics to ensure safety. The first thing after getting in the car is to fasten the seat belt and keep your foot firmly on the brake pedal without releasing it. The gear must be in the P position, and pressing the one-button start until you hear the engine start and the dashboard lights up means the car is started. If there’s no response, check if the key has low battery or is too far away—move it closer. After starting the engine, don’t rush to drive; let it idle for about a minute to stabilize the temperature, which saves fuel and protects the engine. As a driver with over ten years of experience, I always emphasize the importance of the habit of firmly pressing the brake when starting—accidents often begin with neglecting details. The Boyue is easy to operate, but I still recommend beginners practice cold starts more to get familiar with the car’s feel, as safety is the top priority in driving.

Was this review help?
1
Share
Expand All
EvanMarie
10/02/2025, 01:26:31 AM

Starting the Boyue automatic transmission is quite straightforward. Sit in the car, fasten the seatbelt securely—don't forget! Press the brake pedal firmly with your right foot—no half-measures here. Keep the gear lever in the P position, press the start button, and the car will hum to life. If the dashboard shows normal readings, you're good to go—release the brake and gently shift to D to start moving. Once, I forgot the key, and the car immediately sounded an alarm—pretty smart reminder. Here's a tip: in cold weather, wait about 30 seconds after starting until the RPM stabilizes before turning on the heater—it's better for the engine. This car starts quickly and is easy to handle, making daily commutes hassle-free. It feels much more user-friendly than a manual transmission, so even beginners can drive it with ease.

Was this review help?
14
Share
Expand All
McAlana
11/15/2025, 02:10:03 AM

Starting the automatic Geely Boyue requires pressing the brake firmly. Buckle up immediately after getting in the car—don't skip this step. Position both feet properly and press the brake pedal all the way down. Make sure the gear is in P position, then press the start button once to ignite the engine. The dashboard lights should come on, indicating a successful start. After starting, don't rush to shift gears—first check oil pressure, water temperature, and other indicators to ensure the car is stable before releasing the brake and moving off. I often remind my child about the importance of braking during startup to prevent rolling—safety starts from the very beginning. Be extra cautious on rainy days to avoid slipping.

Was this review help?
17
Share
Expand All
OliveRose
01/05/2026, 09:01:09 PM

Starting the Boyue Automatic Transmission Requires Proper Steps. Sit in the driver's seat and fasten your seatbelt without delay. Press the brake pedal firmly until the lights illuminate, ensuring the system is properly engaged. Keep the gear in P position, press the start button, and let the current flow to the starter for ignition. Observe the stable RPM and dashboard indicators to confirm a successful start. When starting a cold engine, avoid pressing the accelerator aggressively; let it idle to warm up, protecting components from wear. The Boyue's built-in smart control prevents starting without pressing the brake, a thoughtful design that ensures driving safety.

Was this review help?
8
Share
Expand All
ZacharyFitz
04/02/2026, 03:29:45 AM

Driving the Boyue automatic transmission daily makes starting convenient. Fasten your seatbelt to protect yourself and others. Firmly press the brake pedal with your right foot—don't half-press it. With the gear in P, simply press the start button. The car starts quietly and smoothly; just ensure the dashboard lights up without any warnings. After starting, wait for the idle to stabilize for 30 seconds before shifting gears and moving, especially in cold weather, to protect the engine's lifespan. When taking kids out, I always say automatic transmissions simplify driving—don't rush the starting process; press the brake pedal thoroughly for reliability.

Was this review help?
12
Share
Expand All
More Q&A

Does the Volkswagen Sagitar have headlight washers?

The Volkswagen Sagitar is equipped with headlight washers. The headlight washer system consists of water outlets located below the headlights, which can be used to clean dust and dirt from the headlights at any time. Taking the 2018 Volkswagen Sagitar as an example, it belongs to the compact car category with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm and a fuel tank capacity of 50 liters. The 2018 Volkswagen Sagitar features a MacPherson strut front suspension and a multi-link independent rear suspension. It is powered by a 1.2L turbocharged engine with a maximum horsepower of 116PS, a maximum power output of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
114
Share

Can the Roewe i5 be driven in E-gear without shifting?

Roewe i5 can be driven in E-gear without shifting. Two engine options: The currently available Roewe i5 models are equipped with two engines: a 1.5L and a 1.5T, paired with three transmission options: a 5-speed manual transmission, a CVT continuously variable transmission, and a 6-speed dual-clutch transmission. 1.5L version: The engine has a maximum output power of 88 kW, a maximum torque of 150 N·m, a top speed of 185 km/h, and a combined fuel consumption of 5.5L/100km as announced by the Ministry of Industry and Information Technology. 1.5T version: The engine has a maximum output power of 124 kW, a maximum torque of 250 N·m, a top speed of 200 km/h, and a combined fuel consumption of 5.7L/100km as announced by the Ministry of Industry and Information Technology.
115
Share

What is the reason for the failure of the automatic locking pin on the Sail?

It indicates a problem with the motor, which needs to be replaced. Engine: The Sail is equipped with a small-displacement 1.2L naturally aspirated engine, with a maximum power of 64kW and a maximum torque of 115Nm. The Sail comes with both 1.4L and 1.2L engines, both belonging to the S-TEC series. Vehicle Model and Appearance: The dimensions of the three-box (or two-box) Sail are: length 4249mm, width 1690mm, height 1503mm, with a wheelbase of 2465mm. The overall size is considered average among small cars. The Sail features a design with the A-pillar moved forward and the C-pillar moved backward, along with a centrally located fuel tank. This design is similar to that of the Honda Fit, with the advantage of improving space utilization in small cars, achieving a spacious interior effect.
113
Share

What are the solutions for heavy steering in the Excelle?

The solutions for heavy steering in the Excelle are: 1. Maintain the steering gear; 2. Inspect or replace the control arm; 3. Measure the steering angle; 4. Check the power steering booster for leaks; 5. Inspect and replace the steering ball joint. The reasons for heavy steering in the Excelle: 1. Lack of oil in the steering gear; 2. Excessive clearance in the front suspension system; 3. Loose steering ball joint. The Excelle is a compact car under the Buick brand, with body dimensions of 4468 mm in length, 1765 mm in width, and 1469 mm in height, a wheelbase of 2611 mm, and a fuel tank capacity of 40 liters. It is equipped with a 1.3-liter inline 3-cylinder naturally aspirated engine, producing a maximum horsepower of 107 hp, a maximum power of 79 kW, and a maximum torque of 133 Nm.
108
Share

Where is the fuel tank cap switch of Kia K5?

The fuel tank cap switch of Kia K5 is located on the floor to the left of the driver's seat. To open the fuel tank cap, you must pull the fuel filler switch. The methods to open the fuel tank are as follows: Mechanical key opening: This method is usually seen on some hardcore off-road vehicles. Nowadays, most family cars do not use mechanical keys to open the fuel tank because it is relatively complicated to use. In-car switch method: The in-car fuel tank switch is located in different positions depending on the car model. Some are on the floor to the left of the driver's seat, some are on the left front door panel or the center console, all marked with a fuel pump icon. However, it is important to note that the in-car switch can easily lead to the driver forgetting to turn off the engine before refueling, so drivers should remember to turn off the engine before refueling. Press-to-open method: The press-to-open fuel tank door is currently the most convenient method. The driver only needs to park the car, and the fuel attendant can press to open the fuel tank for refueling. However, when not refueling, the driver should remember to lock the central control, otherwise the fuel tank cap can be opened.
112
Share

What is the fuel tank capacity of the 3 Series?

The fuel tank capacity of the BMW 3 Series is 59 liters, which is the officially announced data. The BMW 3 Series uses 95-octane fuel, with a fuel consumption of 6.1-6.9L per 100 kilometers. A full tank can cover a distance of 855-967km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow the fuel to expand when the temperature rises without overflowing the tank. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.