···
Log in / Register

How to Start the BMW X1?

5 Answers
ElenaRose
07/29/2025, 07:32 PM

BMW X1 starting procedure: 1. Start the engine by first pressing the brake pedal, then pressing the ignition switch. To ensure smooth engine startup, all electrical devices will be temporarily turned off during the starting moment; 2. To turn on the power without pressing the brake pedal, simply press the one-touch start button. To turn off the ignition switch, press the button again until the tachometer needle moves to the OFF position. The BMW X1 has body dimensions of 4565mm in length, 1821mm in width, and 1620mm in height, with a wheelbase of 2780mm. In terms of power, the BMW X1 is equipped with 1.5T and 2.0T engines. The 1.5T model has a maximum power output of 103 kW and a maximum torque of 220 Nm, while the 2.0T model delivers a maximum power of 141 kW and a maximum torque of 280 Nm.

Was this review help?
4
5
Share
SarahLynn
08/15/2025, 10:25 PM

When I drive the BMW X1, the starting procedure is quite simple and beginner-friendly. First, I usually sit in the driver's seat, press the start button or turn the key, and the car starts. It's crucial to keep the brake pedal pressed at this point because without it, the gear lever might not move. Next, shift the gear lever from P (Park) to D (Drive), which is the forward gear; the BMW X1 is an automatic, so there's no need to fiddle with a clutch like in a manual car. After releasing the brake, the car will creep forward slightly, and then I gently press the accelerator to start smoothly. Remember to check the dashboard for any warning lights—beginners often overlook this. Driving in the city, I frequently encounter traffic lights, and the auto start-stop system temporarily shuts off the engine, but it restarts as soon as I release the brake, without compromising safety. The whole process is smooth and comfortable, with excellent responsiveness from the BMW, making it effortless. My friend said it was incredibly easy the first time they drove it, much better than older cars, and recommended it for beginners.

Was this review help?
16
2
Share
Expand All
FrankAnn
10/18/2025, 10:38 PM

As a veteran driver with twenty years of experience, I'm very satisfied with the starting experience of the BMW X1. After starting the engine, it's essential to press the brake pedal and shift to D mode. BMW offers driving modes like ECO, COMFORT, and SPORT—I recommend starting with COMFORT for smooth acceleration without jerking. Gently pressing the throttle is key; the car feels stable, especially with the xDrive system, which prevents slipping on wet roads. I also love the auto-hold function—it allows me to stop at red lights without keeping my foot on the brake, and I can just press the accelerator to move off, saving effort and enhancing safety. BMW's design emphasizes detail: the gear lever operation is clear and responsive. On slopes, the automatic parking brake holds the wheels to prevent rollback, making it ideal for hilly urban areas. Overall, the starting process is simple and efficient, very user-friendly for daily driving, and once you get used to it, the experience is incredibly comfortable.

Was this review help?
5
3
Share
Expand All
LaPiper
12/01/2025, 10:13 PM

I've been driving for three years, mostly in taxi-like vehicles. The BMW X1's starting operation is straightforward. Start the engine, press the brake, shift to D gear, then release the brake and lightly press the accelerator. I drive during peak hours and focus on efficiency, controlling the accelerator without pressing too hard to avoid high fuel consumption. The BMW's power response is sensitive; it moves as soon as you release the brake, requiring no extra steps. Always check the surroundings and mirrors before starting to ensure safety. Automatic transmission cars eliminate the hassle of a clutch, making them easy for beginners to handle. This car is quite worry-free for daily use.

Was this review help?
19
4
Share
Expand All
OEmery
01/21/2026, 11:37 PM

As a parent of two children, safety is my top priority when starting the BMW X1. I sit in the driver's seat, start the car, press the brake pedal firmly, shift to D gear, release the brake, and gently press the accelerator to start smoothly. The BMW comes with automatic brake assist, preventing rollback on slopes, ensuring the kids are safe in the back seat. I also check the windows and mirrors to confirm there are no people or objects in front of the car. When starting on city streets, avoid pressing the accelerator too abruptly to prevent sudden acceleration that might scare the children. The vehicle responds well, quickly reacting to my inputs. Overall, it feels reliable.

Was this review help?
14
2
Share
Expand All
More Forum Discussions

How to Check Points for C1 Driver's License?

Open the Comprehensive Traffic Safety Service Management Platform and select the province or city where the driver's license was issued. Click on the "Points" query in the upper right corner, enter the driver's license number and the driver's license file number, and then you can check the current points status of the driver's license. Here is some additional information: 1. Points: Based on the severity of the traffic safety violation, the points for a single violation can be: 12 points, 6 points, 3 points, 2 points, or 1 point. Penalties and points are executed simultaneously for the driver's traffic safety violations. If a driver commits more than one violation at a time, the points should be calculated separately and accumulated. 2. Accumulating 12 points: If a driver accumulates 12 points within a single points cycle, they must report to the traffic management department of the public security authority where the driver's license was issued or where the violation occurred within 15 days to receive seven days of education on traffic safety laws, regulations, and related knowledge. After completing the education, the vehicle management office should administer a subject one exam within 20 days.
7
4
Share

What is the correct way to apply the brakes?

During normal driving, whether following another vehicle, going up or down a slope, or stopping at an intersection, you should gently press the brake pedal to ensure the vehicle slows down smoothly and gradually. In emergency situations, you must stomp on the brakes firmly to ensure the vehicle stops in the shortest possible time, minimizing the braking distance and preventing accidents. Below are additional details: 1. Hazards of stomping on the brakes: For passenger comfort. If the brakes are applied abruptly, the vehicle will lurch forward due to inertia, causing passengers to jerk forward, leading to discomfort. In severe cases, passengers may even sustain injuries. To prevent rear-end collisions. Abrupt braking causes the vehicle to stop suddenly, and if the following vehicle cannot react in time or maintains insufficient distance, a rear-end collision is highly likely, posing a danger. 2. Braking methods: When braking a manual transmission vehicle, ensure you press the brake first before depressing the clutch. This keeps the gear lever engaged, allowing the engine's traction to assist in braking, reducing braking time and distance. When the speed drops below 40 km/h, promptly depress the clutch and shift to a lower gear to prevent stalling.
2
0
Share

How Many Times Can You Claim Car Insurance in a Year?

There is no limit to reporting vehicle damage. Insurance companies impose no restrictions on the number of claims. As long as the incident occurs within the policy period and falls under the coverage, the insurer will compensate. However, frequent claims may affect the renewal discount for the following year, impacting future premiums. Here is additional information: 1. Renewal Pricing: All policyholders have an insured amount when purchasing insurance. For example, if the insured amount is 100,000 yuan, the total cost of multiple repairs cannot exceed this amount. Any excess must be covered by the policyholder. 2. Insurance Basics: Due to a lack of insurance knowledge, some policyholders only realize after purchasing insurance that car insurance is not all-encompassing. There are certain absolute or partial exclusions, such as no coverage for drunk driving, unlicensed driving, unregistered vehicles, waiving the right to recover, aftermarket modifications, or a 30% absolute deductible for hit-and-run cases.
9
1
Share

What documents are needed to apply for a lost vehicle license?

Documents required for the reissuance of a vehicle license: 1. "Motor Vehicle Registration Business Process Record Form"; 2. "Motor Vehicle Registration/Transfer Registration Form"; 3. "Application Form for Replacement or Reissuance of Motor Vehicle License Plates and Certificates"; 4. "Motor Vehicle Registration Certificate" (not required if not previously issued); 5. Original and photocopy of the vehicle owner's ID card; 6. Three vehicle photos; 7. Power of attorney and the identity proof of the authorized person (if applying through an agent); 8. Original and photocopy of the temporary residence permit for non-local residents. The motor vehicle license is the legal document permitting the vehicle to drive on roads within China. The vehicle license consists of three parts: the license holder, the main page, and the supplementary page. Below is an introduction to the contents: 1. The front side of the main page is the signed certificate core; 2. The back side is the vehicle photo, sealed in a plastic cover; 3. The supplementary page is the signed certificate core.
17
3
Share

What Causes a Car's Radiator to Boil Over?

Introduction to the causes of a car's radiator boiling over: 1. High-temperature weather; 2. Overloaded air conditioning operation; 3. Malfunctioning cooling components. Car boiling over usually refers to the situation where the engine (also known as the motor or internal combustion engine, which is further divided into diesel and gasoline engines based on the type of fuel burned and the ignition method) reaches a temperature that is excessively high for the normal operating range, thereby affecting the machine's performance and potentially damaging it. Below are the solutions: 1. Conducting a comprehensive inspection of the car's cooling system is the primary method to prevent boiling over: check if the cooling fan is functioning properly, if there are any leaks in the radiator, and if the coolant level is sufficient. If the radiator is leaking, it needs to be repaired or replaced promptly. 2. If the radiator is low on coolant, it should be replenished immediately: if the coolant appears cloudy or deteriorated, it should be replaced.
4
5
Share

Is Mobil 2000 a Fully Synthetic Oil?

Mobil 2000 is an upgraded semi-synthetic oil, essentially a high-grade mineral oil, which differs significantly from fully synthetic oil. Below are the key differences between them: 1. Product Nature: Semi-synthetic oil is a refined product based on mineral oil through hydrocracking technology, consisting of a 4:6 ratio of mineral oil to fully synthetic oil. Fully synthetic oil is a high-grade lubricant derived from ethylene and propylene dispersed from natural gas or crude oil, undergoing complex chemical reactions like polymerization and catalysis to form a lubricant with large molecular structures. 2. Performance Differences: Semi-synthetic oil contains a smaller percentage of high-performance fluids and includes traditional mineral oil. Fully synthetic oil consists of 100% non-traditional, high-performance fluids.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.