How to start the air conditioning in Qoros 5?
3 Answers
Qoros 5 air conditioning cooling activation method is as follows: Press the AC button to start the car air conditioning cooling, then adjust the temperature and air volume. Here is relevant information: 1. Classification: Qoros 5 air conditioning adjustment methods include automatic and manual modes, with some models also equipped with dual-zone air conditioning. 2. Method: Upon entering the car, if the interior temperature feels high, you can first open the windows for ventilation to reduce the temperature inside the car by allowing the flow of outside air while driving, then turn on the air conditioning for cooling. Hot air rises, while cold air sinks. 3. Air vent adjustment: When using the cold air in summer, adjust the air vents to face upwards. This saves energy and improves cooling efficiency.
Starting the air conditioning in the Qoros 5 is quite straightforward. As a first-time user of this car model, I was initially a bit nervous, worried about pressing the wrong button. The actual steps are: first, start the vehicle's engine to power up the car. At this point, the dashboard lights up, and only after the engine is running can you operate the air conditioning. Then, locate the AUTO button on the center console and press it gently to automatically activate the air conditioning. The system will adjust the fan speed based on the current interior temperature and the set target value. If it feels too hot or too cold, you can directly rotate the nearby temperature adjustment knob—turn left to lower the temperature and right to increase it. I also found that sometimes manually pressing the fan speed button can increase or decrease the airflow, especially on scorching summer days when it takes a few minutes after starting the air conditioning to cool down. Patience is key. Additionally, checking whether the air filter is clean and performing regular maintenance can improve and speed up the cooling effect, making the drive more comfortable and reassuring.
As a seasoned driver with ten years of experience, operating the air conditioning in my Qoros 5 is second nature to me—I could do it with my eyes closed. First, start the car and make sure the engine is running—never fiddle with the buttons while the engine is off. Then, glance at the AC panel and press the prominent AUTO button—the AC will hum to life, automatically adjusting fan speed and temperature for hassle-free comfort. To tweak the temperature, just turn the dial to around 22°C, a perfect balance between cool and warm. Crank up the fan for long drives to stay alert, or dial it down for city cruising. Don’t forget to toggle between recirculation modes: use fresh-air mode on highways for better airflow, and switch to recirculation in traffic to avoid exhaust fumes. If there’s a musty smell after startup, the cabin filter might need replacing—regular maintenance prevents breakdowns, saving you money, fuel, and peace of mind.
