How to Start and Park an Automatic Transmission Car?

2 Answers
VanAdam
07/25/25 12:47am
Steps for starting and parking an automatic transmission car: 1. After sitting in the driver's seat, the driver does not need to press the brake pedal. Simply press the start button once to turn on the ACC light, then press it again to initiate the vehicle's self-check (for models with one-key start); 2. Ensure the handbrake is engaged and the gear is in P or neutral. Press the brake pedal and press the start button again to ignite and start the engine; 3. Release the foot brake and optionally warm up the car for 1 to 3 minutes. Monitor the water temperature gauge on the dashboard—when the pointer reaches 90 degrees, the warm-up is complete; 4. Press the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly) to complete the starting process; 5. Release the accelerator, press the brake pedal to bring the vehicle to a smooth stop; 6. Shift the gear from D to N; 7. Engage the handbrake (for electronic handbrakes, pull up the button); 8. Release the foot brake but do not turn off the power; 9. Continue pressing the foot brake and shift the gear from N to P; 10. Release the foot brake and press the start button to turn off the power, completing the parking process.
Was this review help?
12
2
Share
BrandonRose
08/10/25 3:53pm
Starting an automatic transmission car is actually quite simple. First, I sit down and fasten the seatbelt, then press the brake pedal with my right foot and start the engine directly. Once the dashboard lights up, I shift the gear lever from P (Park) to D (Drive), then release the handbrake. Gradually lifting the brake pedal will allow the car to move forward on its own, and a gentle press on the accelerator ensures a smooth start. When parking, safety is even more crucial. After the car comes to a complete stop, don't rush to turn off the engine. First, engage the handbrake firmly, then shift the gear back to P (Park) before shutting off the engine. On slopes, it's advisable to press the brake pedal one more time to stabilize the car. I've developed a habit of checking if the tires are against the curb before getting out, a practice honed over years of driving.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the Volkswagen Lavida?

The fuel tank capacity of the Volkswagen Lavida is 51 liters. Taking the 2021 Volkswagen Lavida as an example, it belongs to the compact car category with the following body dimensions: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, and a trunk capacity of 510 liters. The 2021 Volkswagen Lavida features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
4
0
Share

How to Distinguish Between China IV and China V?

China IV and China V can be distinguished by the following methods: 1. Check the environmental protection label issued during the vehicle inspection. A qualified inspection will issue an environmental protection label that needs to be affixed to the upper right corner of the windshield. The number of stars on the label indicates the emission standard, for example, three stars represent China III; 2. Visit the official website of the local traffic management bureau to check the vehicle's emission standard; 3. The vehicle's emission standard can also be checked on the official environmental protection website by entering the vehicle's brand and model. The emission standard, known as 'China stage,' refers to the national vehicle emission standard stages, from China 1 to China 6, represented by the symbols i, ii, iii, iv, v, and vi respectively.
11
5
Share

How to Open the Trunk from Inside the Car?

To open the trunk from inside the car, press the trunk switch located below the driver's door. Methods for trunk maintenance: 1. Clean dirt with a brush, including the edges and grooves of the trunk, and deodorize after cleaning; 2. Use organized storage bags to place items neatly; 3. Lay a trunk mat to prevent dirt or liquids from damaging the trunk surface. Trunk volume is divided into static volume and dynamic volume. Static volume refers to the commonly used data for general sedans, indicating the trunk capacity without folding down the rear seats. Dynamic volume refers to the trunk capacity of some convertible models when the roof is open or closed.
14
5
Share

What does 'a' mean in a car?

In a car, 'a' stands for AUTOHOLD, which refers to the automatic parking system of the car. When this switch is turned on, even if the vehicle is stopped by braking during driving, the vehicle will not continue to move while in the braking state. It will only continue moving when the accelerator is pressed again. The autohold function is developed from the ESP module. During this process, the ECU computer uses sensors installed on the vehicle to obtain the vehicle's levelness and wheel torque, thereby determining whether braking is needed to prevent the vehicle from rolling. The braking force applied to the wheels is not too strong, just enough to stop the vehicle from moving, so that when the accelerator is pressed again to move forward, there won't be a severe lurching motion.
12
2
Share

Where is the Geely Emgrand produced?

Geely Emgrand is produced in China. The Emgrand is a model under the Geely brand, which is a domestic independent brand, so the Emgrand is naturally a domestic car. Any car under a domestic independent brand is considered a domestic vehicle. The Geely Emgrand includes various models such as the GL, GS, and the new Emgrand. Among them, the EC718 and EC718RV are the first B-segment sedans and hatchbacks from Geely. The Emgrand GL features an ultra-long body and wheelbase, with dimensions of 4.725 meters in length, 1.802 meters in width, and 1.478 meters in height, and a wheelbase of 2.7 meters. The Emgrand GL is equipped with 1.3T and 1.8L engines, paired with a Getrag 6DCT dual-clutch transmission and an Aisin 6-speed manual transmission for consumers to choose from.
9
2
Share

Which production year does the chassis number 'f' indicate?

Chassis number 'f' indicates production in 2016. The 10th digit of the VIN code represents the production year. If owners want to know their vehicle's production year, they can check the identification plate on the B-pillar or the plate in the engine compartment - both plates display the production date, which can be accurate to the month. Besides the production year, the VIN code contains other important information such as body type, engine type, and production region. The VIN serves as a vehicle's ID number and cannot be altered. Many car components bear production dates, including seat belts, headlights, radiators, radiator frames, tires, and glass. All parts' production dates should precede the vehicle's assembly date.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.