How to Start and Enter a Car Without a Key?

2 Answers
Owen
08/30/25 4:49am
Here is the method for starting a car without a key: 1. Without pressing the foot brake, press the start button twice consecutively and wait for at least 6 seconds. 2. Press the foot brake and press the start/stop button to ignite the car. 3. Release the foot brake and warm up the car in place. The warm-up time depends on the car model and environmental temperature. 4. Press the foot brake, release the handbrake, and shift the gear from P to D. 5. Slowly release the foot brake and start moving. 6. Depending on road conditions, gently press the accelerator to increase speed and drive safely. Below is additional information about smart car keys: 1. The car keyless entry system, abbreviated as PKE, is a smart key or smart card. 2. When the key approaches the car body, the doors will automatically unlock, and the anti-theft alarm will be deactivated. At the same time, the turn signals will flash twice. 3. When the key moves away from the car body, the doors will automatically lock, and the anti-theft alarm will be activated. The turn signals will flash once, and the horn will sound briefly.
Was this review help?
1
5
Share
NorahRose
09/12/25 2:01am
I've been driving for over a decade, and keyless systems are quite common, typically involving two steps: entry and startup. Carry the smart key near the vehicle, within a few meters, and the doors will automatically unlock or can be unlocked by pressing a button on the door handle. Once seated inside, press the brake pedal and push the start button on the center console to ignite the engine. If the key's battery is dead, there might be a hidden backup keyhole on the door for a physical key; for starting, try placing the key near the induction area next to the start button. I find this system convenient and hassle-free, eliminating the need to fumble for keys, but security-wise, be careful not to leave the key inside the car—the system automatically locks when you walk away. Keeping the key clean and dry, along with regular battery replacements, can extend its lifespan and prevent malfunctions. Make it a habit to take the key with you after parking to prevent thieves from taking advantage.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

How to reset the maintenance light on Audi S3?

Audi S3 maintenance light reset method: 1. Press and hold the button next to the odometer, turn ignition switch ON; 2. SERVICE or SERVICEIN will appear on the LCD display; 3. Release the button, press the button on the left side of the instrument panel (near the tachometer) to reset the display, and SERVICEIN10000MI will appear on the LCD; 4. Turn ignition switch to OFF position. For interior features, the Audi S3 comes with a three-spoke sport steering wheel, gray-white dashboard needles, combined with all-black interior, giving the new car's cabin a thoroughly sporty style.
16
2
Share

How many cylinders does the Sylphy engine have?

Sylphy is equipped with a four-cylinder engine. The Sylphy uses a 1.6-liter naturally aspirated four-cylinder engine with the model code HR16, delivering a maximum power of 102 kW and a maximum torque of 169 Nm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. The Sylphy is a compact family sedan under the Nissan brand, with a wheelbase of 2,712 mm and dimensions of 4,641 mm in length, 1,815 mm in width, and 1,450 mm in height. The front suspension of the Sylphy employs a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The torsion beam rear suspension is designed to maximize rear passenger space and trunk capacity.
15
0
Share

Is the engine of the Mazda3 a three-cylinder or four-cylinder?

The engine of the Mazda3 is a four-cylinder. In terms of power, the Mazda3 offers a choice between a 1.5-liter naturally aspirated engine and a 2.0-liter naturally aspirated engine. The 1.5-liter version delivers a maximum horsepower of 117 hp, a maximum power of 86 kW, and a maximum torque of 148 Nm. The Mazda3 is a compact car under Changan Mazda, with dimensions of 4662 mm in length, 1797 mm in width, and 1445 mm in height, and a wheelbase of 2726 mm. For the suspension, the Mazda3 features a MacPherson strut front suspension and a torsion beam rear suspension.
4
4
Share

What are the reasons for failing the written test (Subject 1)?

It might be due to insufficient practice. Here are some methods for Subject 1 preparation: 1. Directly judge right/wrong: These keywords in questions indicate correct answers: prohibited, must not, cannot, do not, yield by stopping, yield by slowing down, avoid by slowing down, wait in line, preserve the scene, keep right; These keywords indicate wrong answers: accelerate, unnecessary, no need, coast in neutral, emergency brake, refuse to yield, immediately. 2. Overtaking restrictions: Never overtake these vehicles: ambulances, fire trucks, police cars on emergency duty, rescue vehicles; Never overtake in these areas: crosswalks, narrow roads, curves, narrow bridges, railroad crossings, tunnels.
15
1
Share

What are the dimensions of the Lavida car?

The dimensions of the Lavida car are: for the sedan version, the length, width, and height are 4670 mm, 1806 mm, and 1474 mm respectively, with a wheelbase of 2688 mm; for the hatchback version, the length, width, and height are 4541 mm, 1806 mm, and 1488 mm respectively, with a wheelbase of 2688 mm. The Lavida's in-car navigation system combines touch screen and rotary knob controls, and includes MP3 playback capability, supporting USB, AUX, and SD card expansion slots for ease of use and powerful functionality. The LCD screen features a foldable design. The Lavida is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam semi-independent suspension.
10
1
Share

Which model is the Sylphy 59800?

Sylphy 59800 refers to the Sylphy Classic model. The exterior of the Sylphy Classic is quite similar to the newer models, but the rear emblem has been updated—newer models feature the SYLPHY Classic badge. The Sylphy 59800 is positioned as a family-oriented compact car, with dimensions of 4641mm in length, 1815mm in width, and 1450mm in height, and a wheelbase of 2712mm. It is powered by a 1.6L naturally aspirated engine, delivering a maximum power of 139 horsepower and a peak torque of 169 Nm. The transmission options include a 5-speed manual gearbox and a CVT (continuously variable transmission).
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.