How to Start an Automatic Transmission Vehicle?

How to Set Up Auto Lock for Elysion?

Elysion models do not come with an auto-lock feature and require owners to install it themselves. Here is some information about the auto-lock function: 1. The purpose of the auto-lock feature is theft prevention. It quickly locks the doors after driving, preventing door-pull robberies during traffic jams or at red lights, providing a certain level of security. 2. The auto-lock also protects child passengers inside the car, preventing young children from opening the door handles while the car is in motion. 3. However, it also has some drawbacks, such as potentially hindering escape in case of an accident.

15

1

Share

Can Car Engine Oil Be Used for Motorcycles?

Car engine oil cannot be used for motorcycles because the working characteristics of motorcycle engines are different from those of car engines. Motorcycle engines operate at higher RPMs and experience faster RPM increases. Car engine oil cannot meet the lubrication requirements of motorcycle engines, so specialized motorcycle oil must be used. Performance requirements for motorcycle oil: Motorcycle oil needs stronger high-temperature shear resistance, high-temperature oxidation resistance, and an appropriate friction coefficient. Motorcycle engines operate at 1.5 to 2.1 times the RPM of car engines, with a power-to-displacement ratio 1.3 to 1.9 times higher. Under such high-RPM, high-load conditions, motorcycle oil must exhibit superior high-temperature shear resistance. Additionally, motorcycles have poorer heat dissipation compared to cars, requiring higher high-temperature oxidation resistance from the oil. Four-stroke motorcycle engines are connected to the transmission, and the lubricating oil serves a triple role in lubricating the engine, clutch, and drivetrain, each with different lubrication requirements. During the break-in period of a motorcycle, the first oil change should be done at 500 kilometers, followed by every 1,000 kilometers thereafter. If the vehicle is used infrequently, it is still recommended to change the oil at least twice a year.

3

1

Share

What is the button with an 'A' inside a circle in a car?

The button with an 'A' inside a circle in a car is the switch for the auto start-stop system. Pressing this button can turn the auto start-stop system on or off. Here is some related information: 1. The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) and restarts the engine when it's time to move forward again. 2. The auto start-stop system is equipped with an enhanced motor that has idle start-stop functionality, allowing the engine to completely shut off when the conditions for idle stopping are met. When the vehicle needs to start moving again, the idle start-stop motor system quickly responds to the driver's command, rapidly restarting the engine for seamless operation, thereby reducing fuel consumption and exhaust emissions.

18

0

Share

Why does the car shake when idling?

Reasons for engine idle shaking: 1. Engine intake pipe leakage: The intake system contains many intake manifolds or various valves. Leakage in these components allows unwanted gases to enter, causing the concentration of the air-fuel mixture in the intake manifold to become too high or too low, ultimately leading to intermittent engine shaking or weak idle performance. 2. Fuel system blockage or malfunction: Due to a blocked fuel tank vent, clogged fuel tank valve, fuel filter, or fuel lines between the tank and the carburetor, the engine may not receive the required amount of fuel during idle, resulting in a lean mixture, reduced engine power output, and idle shaking. 3. Idle control valve failure: The idle operation of an electronic fuel injection engine is mostly controlled by the idle control valve. The ECU adjusts the opening of the idle control valve based on signals such as engine speed, temperature, and throttle position to maintain stable idle speed. If the valve malfunctions, it can cause uneven air distribution, fluctuating idle power, and vehicle shaking. 4. Engine carbon buildup: This includes carbon deposits in the cylinders, throttle body, spark plugs, and intake system—areas critical to engine power output. Excessive carbon buildup reduces ignition energy, decreases intake efficiency, and ultimately leads to unstable engine power output, idle shaking, and poor acceleration.

3

Share

What Causes the ABS Light to Illuminate in a Porsche?

ABS light illumination can occur in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly illuminated (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and calculating the wheel slip rate, thereby failing to issue appropriate commands to regulate braking. Solution: Clean the contaminants from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose connections in the system wiring or poor contact in the ABS relay, leading to system malfunction. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple electrical components are in use, the battery voltage drops below 10.5V. As engine speed increases, voltage rises, and the ABS light turns off. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains illuminated after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS control unit malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check for enlarged terminal gaps; replace the ABS or ABS/ASR control unit if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS control unit detects a significant discrepancy between rear and front wheel speeds during high-speed driving; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's specified tire and wheel rim sizes, as indicated on the fuel tank cap label. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch linkage fully downward, then release the pedal to complete self-adjustment; replace the brake light switch if necessary. If the ABS warning light is illuminated, it is advisable to avoid continued driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

2

Share

How to Distinguish Between China 6a and China 6b When Buying a Car?

Methods to check a car's national emission standards are as follows: 1. Check the vehicle's emission standard by looking at the vehicle's environmental protection annual inspection label. 2. Visit a professional query website and search for the keyword "motor vehicle environmental protection" to enter vehicle information on the relevant website for query. For example: The Motor Vehicle Environmental Protection Network can check the vehicle's emission standards and other information. 3. Bring the motor vehicle registration certificate and relevant ID documents to the vehicle registration department (DMV) for inquiry. 4. Check the vehicle's new car factory certificate, where the car's emission standard will be indicated in the relevant description.

7

1

Share

How to Start an Automatic Transmission Vehicle?

How to Set Up Auto Lock for Elysion?

Can Car Engine Oil Be Used for Motorcycles?

What is the button with an 'A' inside a circle in a car?

Why does the car shake when idling?

What Causes the ABS Light to Illuminate in a Porsche?

How to Distinguish Between China 6a and China 6b When Buying a Car?

How long should you wait before turning off the engine after jump-starting a car?

How to Deal with Moisture Inside Headlights?

How to Choose Car Antifreeze?

What are the symptoms of a broken engine timing belt?