How to Start an Automatic Transmission Car with One-Button Start?

1 Answers
DelKimberly
07/30/25 8:40am
The method to start an automatic transmission car with one-button start is: 1. Press the brake with your right foot, and press the one-button start key with your right index finger, at which point the car's engine will ignite and operate; 2. Shift into R gear or D gear, and release the handbrake; 3. If you need to reverse, gently lift your right foot to release the brake; 4. If you need to move forward, already in D gear, move your right foot to the accelerator pedal, gently press the accelerator to move forward. The one-button start device is part of a smart car, a button device that simplifies the starting process, and can also be used to turn off the engine. This device can be retrofitted in the original car key lock position or as an independent panel modification.
Was this review help?
10
5
Share
More Forum Discussions

How many people can a sedan accommodate?

A sedan can accommodate up to 5 people, as long as it does not exceed the approved passenger capacity. Different vehicle models have varying passenger capacities, and the specific number should be checked against the vehicle's documentation. Article 55, Clause 1 of the Road Traffic Safety Law Implementation Regulations stipulates that passenger vehicles on highways must not exceed the approved passenger capacity, excluding children who are exempt from tickets according to regulations. When the passenger capacity is full, the number of exempt children must not exceed 10% of the approved passenger capacity. The new traffic regulations clearly state that for vehicles other than medium-sized passenger and cargo vehicles, school buses, and hazardous material transport vehicles, exceeding the speed limit by 50% to 70% will result in a 12-point deduction and possible license revocation for a first offense; exceeding by 70% to 100% will result in a 12-point deduction and license revocation; exceeding by more than 100% will result in a 12-point deduction and license revocation.
9
5
Share

Will Only Having 2 License Plate Screws Result in a 12-Point Deduction?

There are two scenarios regarding whether having only 2 license plate screws will result in a 12-point deduction: 1. If the license plate is designed to have only 2 fastening screws, not having 4 will not incur any penalty or fine; 2. However, if the license plate is designed for 4 fastening screws and the owner only installs 2, this is a violation. Failing to install the vehicle license plate as required can result in a one-time 12-point deduction. License plates with 4 fastening screws are more secure and sturdy than those with 2. After heavy rainfall, it's common to find lost license plates in flooded areas. License plates, commonly known as vehicle tags, refer to the plates attached to the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, and other relevant information.
8
4
Share

What is the sign of insufficient car coolant?

The sign of insufficient car coolant is a thermometer-like or key-shaped indicator. When the coolant is low, the car's engine and radiator lack protection, which affects the heat dissipation efficiency of the radiator and fails to achieve the desired cooling effect. Coolant is an essential fluid for cars and is considered a consumable item. During vehicle use, loss is unavoidable. The normal service life of regular coolant is two to two and a half years, while long-life coolant lasts four to five years. Once the service life is reached, the coolant should be replaced. Functions of car coolant: 1. Anti-freeze: To prevent the coolant from freezing in winter, which could cause the radiator and engine block to crack, the freezing point of the coolant should be about 10 degrees lower than the lowest temperature in the region. 2. Anti-corrosion: The coolant should prevent corrosion of metal parts and aging of rubber components. 3. Anti-scale: The coolant should minimize scale formation during circulation to avoid clogging the pipes and affecting the cooling system's heat dissipation function. 4. Anti-boiling: Coolants that meet national standards typically have a boiling point exceeding 105 degrees Celsius, higher than water's boiling point of 100 degrees, allowing the coolant to withstand higher temperatures without boiling, thus meeting the cooling needs of high-load engines to some extent.
7
0
Share

Is a sedan with 5 adults and 1 child considered overloading?

A sedan with 5 adults and 1 child is considered overloading. According to relevant regulations, the number of passengers in a motor vehicle must not exceed the approved capacity. The overloading regulations do not specify the height, weight, or age of passengers but only the quantity. Therefore, whether it is overloading depends solely on the number of people approved on the vehicle's registration certificate. Even one extra person, including an infant, counts as overloading. Regardless of where passengers sit in the car, they must always fasten their seat belts. It is recommended to install a child safety seat when transporting children, and holding a child in the front passenger seat is prohibited. In the event of a collision, the airbag deployment may not only fail to provide protection but could also injure the front passenger. Therefore, many vehicles also stipulate that children are not allowed to sit in the front passenger seat, and child safety seats cannot be installed there either.
3
2
Share

What is the 0-100 km/h acceleration time of the Ferrari SF90?

Ferrari SF90's 0-100 km/h acceleration time is 2.5 seconds. The 0-100 km/h acceleration refers to the time it takes for a car to accelerate from standstill to 100 kilometers per hour, which is an intuitive reflection of the car's power. The Ferrari SF90 is a hardtop convertible featuring an electric hardtop roof design, with body dimensions of 4704mm in length, 1973mm in width, and 1191mm in height, and a wheelbase of 2649mm. The car is equipped with a hybrid system consisting of a 3.9T twin-turbocharged V8 engine and three electric motors, delivering a maximum power of 574kw and a maximum torque of 800nm.
10
1
Share

What Causes Diesel Engine Idle Vibration?

Diesel engine idle vibration may be caused by: 1. Sticking or poor atomization of the fuel injector nozzle assembly in the cylinder, requiring cleaning; 2. Uneven idle fuel supply from the injection pump leading to inconsistent cylinder operation, necessitating fuel pressure inspection and potential part replacement; 3. Improper idle speed adjustment with excessively low RPM, requiring readjustment; 4. Poor cylinder operation due to inadequate valve sealing, requiring inspection of sealing rings; 5. Insufficient lubrication caused by engine overheating or low oil level, requiring oil top-up; 6. Severe engine carbon buildup, requiring fuel system cleaning and timely inspection/cleaning of the idle control valve; 7. Worn engine mounts - these components absorb minor engine vibrations during operation. Deteriorated mounts transmit vibrations to the steering wheel and cabin, causing idle vibration, requiring replacement.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.