How to Start an Automatic Transmission Car with One-Button Start?

1 Answers
ElisaRose
07/24/25 3:53am
The correct method to start an automatic transmission car is to press the brake pedal, shift the gear from P (Park) directly to D (Drive), and then release the handbrake. Here are some detailed instructions: When starting the car, you should also pay attention to the following points: 1. Do not press the accelerator pedal after the engine starts and before the car begins to move. 2. Do not release the brake pedal while shifting gears. 3. After starting, avoid pressing the accelerator pedal too quickly or too hard; instead, press it gradually. 4. On muddy roads, shift from D (Drive) to S (Sport) or L (Low) gear. For automatic transmissions with a 58 car driving mode selection button, you can also change the driving mode according to road conditions and then manually shift into the appropriate gear for driving.
Was this review help?
19
1
Share
More Forum Discussions

Where is the fuel tank cap switch for the BMW 4 Series?

The BMW 4 Series fuel tank cap switch is a sensor switch, not a physical one, and the sensor switch is located on the fuel tank cap. When the central locking system is unlocked, simply walk up to the fuel tank cap and press it lightly to open it. The BMW fuel tank cap consists of two parts: an outer and an inner cap. The inner cap can be opened by twisting it manually. Here is some relevant information about the fuel tank: 1. The fuel tank is in a semi-closed state only during refueling; otherwise, it remains fully sealed. However, as the vehicle ages and is used over time, sediment and impurities inside the tank will accumulate, inevitably entering the engine through the fuel supply system. Over time, this can cause damage to the vehicle. 2. The fuel tank itself has protective measures in place to waterproof and insulate. If the vehicle frequently idles for long periods, it may require a fuel system cleaning or filter replacement by around 30,000 kilometers. Otherwise, if the fuel line becomes clogged and the tank's internal pressure rises too high, the car may experience shaking while driving. Under high pressure, the fuel tank is highly susceptible to cracking, which can lead to fuel leakage in severe cases and increased fuel consumption.
1
1
Share

How Long Can an Engine Run with a Misfiring Cylinder?

An engine with a misfiring cylinder is theoretically not advisable to continue driving. Below is an introduction to the related content: 1. Four-cylinder engines: If the vehicle's engine is a four-cylinder, a misfiring cylinder means only 3 cylinders may be functioning properly. 2. Idling: At idle or low to medium speeds, as long as you don't accelerate urgently, driving about ten kilometers shouldn't pose a significant problem. Here are some extended guidelines on precautions when using a car engine: 1. Avoid driving in neutral: The engine inherently has a fuel-cut function during deceleration; driving in neutral is not conducive to fuel economy. 2. Eliminate safety hazards: When using the vehicle, pay attention to observation. If you notice oil on the ground, determine whether it's due to engine oil leakage and promptly communicate with the car's 4S shop. 3. Idle before shutting down: For vehicles equipped with turbochargers, do not shut off the engine immediately after high-speed driving or climbing a slope. Let it idle for about 10 minutes before turning it off. 4. Filter impurities: When brake fluid is contaminated or absorbs moisture, or if impurities or sediment are found in the brake fluid, it should be replaced promptly or carefully filtered.
2
3
Share

What is the difference between Passat 300 and 330?

The differences between Passat 300 and 330 are mainly reflected in the engine and power aspects. The following are the main differences between Passat 300 and 330: 1. The 300TSI is equipped with the second-generation EA888 engine and is the government procurement version. The 330TSI is equipped with the third-generation EA888 engine and comes in Premium, Luxury, and Flagship versions. 2. The 300TSI is powered by a 1.8T inline 4-cylinder turbocharged low-power version, matched with a 6-speed automatic transmission, with a maximum power of 118KW, maximum horsepower of 160PS, and maximum torque of 250N·m. The maximum power speed is 5100~6000rpm, and the maximum torque speed is 1700~5000rpm. The 330TSI is powered by a 1.8T inline 4-cylinder turbocharged high-power version, matched with a 7-speed dual-clutch transmission, with a maximum power of 132KW, maximum horsepower of 180PS, and maximum torque of 300N·m. The maximum power speed is 4300~6250rpm, and the maximum torque speed is 1450~4100rpm.
18
4
Share

Why are vehicles with Lu D license plates cheaper?

The specific reasons why vehicles with Lu D license plates are cheaper are as follows: 1. Airport retired vehicles: The area corresponding to Lu D is Zaozhuang City, Shandong Province. Cheap Lu D vehicles may also be airport retired vehicles. Airport retired vehicles are operational vehicles, not private cars, and their performance cannot be guaranteed. The condition of these vehicles may not be as good as decommissioned taxis. 2. Decommissioned taxis: Cheap Lu D license plate vehicles may be decommissioned taxis from Shandong, meaning eliminated taxis. Taxis generally have a mandatory retirement period of 8 years, and after purchase, they can only be used for about 3 years before being forcibly scrapped. The retirement periods for decommissioned taxis are: 8 years for small and micro passenger vehicles, 10 years for medium-sized taxi passenger vehicles, and 12 years for large taxi passenger vehicles.
20
5
Share

What are the differences between the Taurus and the Mondeo?

The Taurus and the Mondeo are both mid-to-high-end vehicles under the Ford brand. The differences between them are as follows: 1. Different exterior styles. The two models have distinct differences in their exterior designs. The Mondeo's front grille resembles that of an Aston Martin, commonly referred to as the "Martin face." Its grille is smaller than that of the Taurus, but the Mondeo's hood features more lines, combined with its waistline, giving it a more dynamic and youthful appearance with a sportier style. In contrast, the Taurus has a typical business-oriented design, appearing more mature and stable. 2. Different interior configurations. The Taurus's interior combines leather and plastic materials, with wood trim available in flagship models, offering a richer configuration that leans more toward business use. The Mondeo's interior has a stronger plastic feel but features more tech-savvy configurations. 3. Different body space. The Taurus measures 4996mm in length, 1878mm in width, and 1503mm in height, with a wheelbase of 2949mm, surpassing the Mondeo in both body size and interior space. 4. Different powertrains. Both the Ford Taurus and the new Mondeo are equipped with a 2.0L EcoBoost turbocharged engine, incorporating direct injection technology and paired with a 6AT transmission. However, the Taurus's 2.0T engine increases the maximum power and peak torque by 2kW compared to the new Mondeo, though both vehicles maintain the same torque output.
8
0
Share

How much engine oil should be added to a Volvo S60L?

Volvo S60L requires 3.6L of engine oil per refill, and the oil should not be overfilled. Automotive lubricants are categorized into mineral lubricants, synthetic lubricants, semi-synthetic lubricants, etc. Most commercially available synthetic oils contain less than 12% PAO. Below is relevant information about lubricants: 1. Lubricants are formulated from hydrocarbons refined from natural gas and crude oil. There is no strict international definition for synthetic oil, but generally, lubricants containing PAO are referred to as synthetic oil. Full synthetic oil is blended with 100% PAO as the base oil along with additives. The extremely stable molecular structure of full synthetic oil provides superior oxidation stability and outstanding anti-wear performance, effectively extending engine life. 2. Semi-synthetic and mineral lubricants are generally suitable for average users. Both laboratory and road tests show that this full synthetic oil ideally combines viscosity, lubrication, volatility, and cleanliness, maximizing engine protection while minimizing friction and fuel consumption. 3. The oil level should be maintained between the upper and lower marks on the dipstick. Excessive oil can enter the combustion chamber through the gap between the cylinder and piston, forming carbon deposits. These deposits increase the engine's compression ratio and the likelihood of knocking. Carbon deposits in the cylinder, when red-hot, can also cause pre-ignition. If they enter the cylinder, they can accelerate wear on the cylinder and piston and further contaminate the lubricant.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.