How to Start a Porsche with the Key?

2 Answers
JoyMarie
07/24/25 10:10am
Insert the key into the ignition slot on the left side of the steering wheel and turn it to start the vehicle. Below is some related information about Porsche: 1. In the early days of racing, to save time and achieve a faster start, drivers would start the car with their left hand while shifting gears with their right hand, gaining an advantage right from the beginning. This tradition of placing the ignition slot on the left side has been preserved, making Porsche different from mainstream models today, as it maintains its unique style. 2. The Porsche 911 series uses a horizontally opposed engine, which has a very low center of gravity. Using this type of engine helps lower the vehicle's overall center of gravity. This engine is quite special, as only two brands in the world use horizontally opposed engines: Porsche and Subaru.
Was this review help?
6
1
Share
MalachiRose
08/11/25 5:21am
Starting a Porsche with the key is actually quite simple. I'm used to driving a Porsche Cayenne daily. If you have an older model with a keyhole, just insert the key into the slot near the dashboard after getting in, turn it to the start position, and the engine will fire up. Most newer models feature keyless start—keep the key in your pocket without taking it out, sit down and fasten your seatbelt, press and hold the brake pedal, then push the engine start button located either on the left side of the steering wheel or the center console, and the engine will immediately come to life. Remember to ensure the gear is in P (Park) or depress the clutch (for manual transmissions), otherwise startup might fail. I once encountered a situation where the key battery was low, causing no response when trying to start. I learned to check the key periodically and replace the battery when needed. The whole process is smooth, but since the key's sensing range is limited, it's best not to leave it in the trunk or near your phone to avoid interference. Porsche's thoughtful design makes every startup an exciting moment.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

What is the relationship between car deviation and misaligned steering wheel?

There is no relationship between car deviation and misaligned steering wheel. However, there are differences between the two. Here are the methods to distinguish them: 1. Car deviation: After the steering wheel is straightened, the vehicle starts to drive to the right or left within 50 meters. 2. Misaligned steering wheel: The steering wheel is adjusted to the angle where the vehicle drives straight, and the vehicle does not drive to the left or right within 50 meters, but the steering wheel is not straight. Here are the reasons for car deviation and misaligned steering wheel: 1. Due to long-term use, the braking system may wear out and may not fully return to position, causing resistance on one side of the wheel hub during driving, resulting in deviation in the direction of the car. 2. For most private cars, every 20,000 kilometers driven, the components of the chassis will wear out, causing changes in the positioning angle, which will eventually lead to car deviation and misaligned steering wheel.
1
1
Share

What is the working process of the car ABS system?

ABS system working process: During braking, the ABS quickly determines the wheel lock-up state based on the speed signals from each wheel speed sensor. It closes the normally open input solenoid valve for the wheel that begins to lock up, keeping the braking force constant. If the wheel continues to lock up, the normally closed output solenoid valve is opened, causing the braking pressure on that wheel to rapidly decrease due to the direct connection to the brake fluid reservoir, preventing the wheel from completely locking up due to excessive braking force. This ensures the braking state remains at the optimal point (slip rate S of 20%), achieving the best braking effect and maximum driving safety. Functions of ABS: Maximize the effectiveness of the brakes, reducing braking time and distance. Effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability. Allow steering during emergency braking, providing good steering control. Avoid intense friction between the tires and the ground, reducing tire wear.
1
3
Share

What does 'how much oil does a car burn' mean?

"How much oil does a car burn" refers to how many liters of fuel are consumed. The specific explanation is as follows: 1. The simplest identification method: For example, for a Passat 1.8T, you can divide 1.8 by 2, resulting in approximately 9 liters per 100 kilometers. 2. Ferrari 360: 360 means a 3.6-liter displacement, divided by 2, resulting in approximately 18 liters per 100 kilometers. 3. Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when driving a certain distance at a certain speed: it is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is measured by manufacturers under objective conditions using a dynamometer installed on the vehicle's chassis, converting the values into speed parameters, then calculating the theoretical experimental fuel consumption data per 100 kilometers for the model at specified speeds. 4. Most vehicles approach their most economical speed at 90 km/h: therefore, the theoretical fuel consumption figures usually published are typically based on fuel consumption per 100 kilometers at 90 km/h.
11
5
Share

How to Turn Off the Maintenance Reminder on a Haval Vehicle?

The method to turn off the maintenance reminder on a Haval vehicle is as follows: 1. Turn off the ignition switch and press and hold the trip meter reset button on the instrument cluster; 2. Turn on the ignition switch, and the odometer display will start counting down; 3. When the display shows 0000.0, release the button to clear the reminder. Haval models include: Haval F7, Haval H2, Haval H6, Haval H9, Haval Big Dog, etc. Taking the Haval F7 as an example, it is a compact SUV with body dimensions of: length 4620mm, width 1846mm, height 1690mm, wheelbase 2725mm, and a fuel tank capacity of 55 liters.
17
4
Share

What Issues Should Be Noted During a Car's First Maintenance?

During a car's first maintenance, the following aspects should be noted: 1. Cost: When a new car undergoes its first maintenance at a 4S shop, the staff may claim the service is free, but there could be hidden tricks. For instance, the oil provided for free during the first maintenance is usually of lower quality. During the maintenance, they might suggest replacing it with a higher-quality product, requiring the consumer to pay the price difference. 2. Maintenance Items: The maintenance items are generally implemented based on the vehicle's usage. For example, the air filter and brake fluid have specific replacement intervals. 3. Vehicle Inspection: Essential free inspections during the first maintenance must be conducted, even for a new car. The parts of the car that should be inspected during the first maintenance must not be overlooked, as sometimes, precisely because it's a new car, some components are more prone to damage. 4. Timing: Before maintenance, check the user manual to understand the general content of the first maintenance and any items that require out-of-pocket expenses. Before maintenance, call to schedule an appointment. Making an appointment is a good habit that can save time waiting in line. 5. Observe Changes in the Car After First Maintenance: After the first maintenance, pay attention to any changes in the car, as the full inspection includes many items. For example, check if the headlights are functioning properly, if the high beams are working, the brightness, height, and turn signals are normal, if the wipers clean effectively, and if the rubber seals are in good condition.
12
4
Share

How to Remove the Santa Fe's Fog Lights?

The method to remove the Santa Fe's fog lights is: 1. Use specialized tools to remove the fog light cover; 2. Unscrew the fog light bolts and disconnect the wiring harness. The Santa Fe is a mid-size SUV launched by Beijing Hyundai. Taking the Santa Fe 2020 Automatic Two-Wheel Drive Elite Edition as an example, its body dimensions are: length 4930 mm, width 1910 mm, height 1720 mm, with a wheelbase of 2865 mm. The Santa Fe 2020 Automatic Two-Wheel Drive Elite Edition is equipped with a 2.0T turbocharged engine, with a maximum power of 169 kW and a maximum torque of 353 Nm. Its front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.