How to Start a Mercedes-Benz Car When the Key Is Lost?

2 Answers
McBrianna
07/24/25 3:46pm
Generally, after the car door is closed, there is a certain gap on the window, and you can remove the window's sealing strip. Then use a wire or thin rope to lower it down along the window gap at the door key position, hook it onto the door latch, and pull it up to open the door.
Was this review help?
2
2
Share
ZacharyRose
08/11/25 8:48am
Last time my colleague lost his Mercedes key, and he was really frantic. I suggested he search all his coat pockets and backpack compartments first. If he really couldn't find it, he'd have to consider other options. Mercedes has several emergency starting methods: if there's a hidden mechanical keyhole in the car, try inserting and turning it; if it's a newer fully electronic model, quickly take out your phone and see if the Mercedes me app can remotely start the ignition. If all else fails, the only option is to tow the car to the dealership, where they can reprogram a new key using professional equipment. However, you'll need to prepare your ID and vehicle registration for verification, and it's bound to cost several thousand yuan. The worst part is waiting two or three days to get the new key, during which time the car is completely unusable. After going through this, I've gotten into the habit of keeping a spare key taped under my office drawer for emergencies.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What are the precautions for the first maintenance of Binyue?

There are several precautions for the first maintenance of Binyue: 1. Replace engine oil, oil filter, gasoline filter, and air filter. 2. Check whether the level of the car coolant meets the specified requirements. 3. Check the fluid levels of the brake and clutch. 4. Check the battery fluid level and the level of the windshield washer fluid tank. 5. Check whether the oil level of the power steering fluid tank meets the specified requirements, and inspect all oil pipe interfaces of the system for any leakage. 6. Check whether the front and rear lights of the car are complete. 7. Check the tension and aging condition of the belts for the generator, air conditioner, water pump, and power steering pump. 8. Check whether the car's exhaust emissions meet the standards.
4
4
Share

How to Deal with a Car Exposed to Rain?

Handling methods for a car exposed to rain mainly include: 1. Wash the car promptly as the acidic substances in rainwater can damage the paint. If not cleaned in time, the car's paint can easily lose its luster. 2. When the weather clears, wash the car body. Waxing or glazing can effectively protect the car's paint surface, preventing fading and aging. Additional tips: 1. Rainwater, along with debris and dust in the air, can seep into the car body through small holes in the chassis, causing rust and peeling. Therefore, it's essential to maintain the chassis promptly after rain. 2. Chassis sealing can isolate the chassis from the external environment, providing anti-corrosion, anti-rust, and soundproofing functions, thereby extending the car's lifespan. 3. Note: Before sealing, cover the heat dissipation parts of the transmission and exhaust systems to avoid affecting their normal operation after sealing.
5
2
Share

Differences between v97 and v93?

The differences between v97 and v93 are as follows: 1. Different engines: The Pajero v97 uses a 3.8L displacement engine with the code name 6g75; the v93 uses a 3.0L displacement engine with the code name 6g72. 2. Different power outputs: The Pajero v97 has a maximum horsepower of 243ps and a maximum torque of 327nm; the v93 has a maximum horsepower of 177ps and a maximum torque of 259nm. The similarities between v97 and v93 are as follows: 1. Both the Pajero v97 and v93 belong to the mid-to-large-sized vehicle category. 2. Both have the same body dimensions: length 4830mm, width 1895mm, height 1885mm, wheelbase 2780mm, and fuel tank capacity of 90L.
12
2
Share

What are the differences between Toyota C-HR and IZOA?

Toyota C-HR and IZOA have the following differences: 1. IZOA is produced and sold by FAW Toyota, while C-HR is produced and sold by GAC Toyota. 2. The lower grille of IZOA adopts a relatively simple horizontal bar style paired with silver lower guard decoration; whereas C-HR retains the design of the overseas model, using a more sporty honeycomb grille in the lower grille area. 3. The rear emblem of C-HR is "C-HR", while IZOA uses the English name "IZOA". 4. There is almost no difference in the powertrain between the two models. Both use a 2.0L naturally aspirated engine designed for the TNGA architecture series, featuring a four-cylinder structure with maximum power output of 171 horsepower and maximum torque of 203 Nm. The maximum torque speed range is 4400-4800 rpm, and the maximum power speed is 6600 rpm.
20
3
Share

Where is the brake check valve located on the Baojun 510?

The brake check valve on the Baojun 510 is located on the "I" marked brake vacuum hose. It is a straight pipe with a bulge in the middle section, and the check valve is housed inside this bulge. Braking System: The Baojun 510 uses disc brakes. The disc brake system applies pressure to the brake caliper through the hydraulic system, causing the brake friction pads to rub against the brake disc that rotates with the wheel, thereby achieving the braking effect. Braking Mechanism: When the brake pedal is depressed, it pushes the piston in the master cylinder, creating pressure in the hydraulic circuit. The brake fluid transmits this pressure to the wheel's brake slave cylinders, pushing their pistons. These pistons then push the brake shoes outward, causing the friction pads to rub against the brake drum, thus generating braking force.
11
5
Share

What Does Semi-Synthetic Oil Mean?

Semi-synthetic oil is a lubricant formulated from Group III base oils, which are refined from mineral oil through hydrocracking technology. Specifically, it is a blend of mineral oil and full synthetic oil in a 4:6 ratio, with the addition of certain additives. Additional Information: 1. Semi-synthetic oil is generally suitable for mid-to-low-end naturally aspirated engine models. As long as it is not a turbocharged engine or a high-end, large SUV model, semi-synthetic oil can be used. 2. The replacement interval for semi-synthetic oil is around 8 months, typically requiring a change every 7,000 kilometers. 3. There is no fixed replacement period for engine oil; it should be determined based on actual driving conditions and habits. If the driving environment is harsh, the oil should be changed earlier. Additionally, the type of oil used should also refer to the recommendations in the vehicle's maintenance manual.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.