···
Log in / Register

How to Start a Magotan When the Battery is Dead?

1 Answers
MadisonLee
09/05/25 3:44am
Press the upper part of the car key and pull out the mechanical key by hand; find a paper card to press against the lower part of the driver's side door handle. Place the mechanical key you just pulled out against the lower part of the door handle; pry the mechanical keyhole cover loose by prying outward and then pull the cover off.
Was this review help?
19
3
Share
More Forum Discussions

What is the method for removing the license plate light?

The method for removing the license plate light is: 1. Remove the screws fixing the license plate and take off the license plate; 2. Use a flat-head screwdriver to remove the component above the bulb; 3. Unscrew the bulb directly from the component. The function of the license plate light is to illuminate the vehicle license plate at night. The types and functions of vehicle lights include: 1. Low beam: To clearly see the road conditions in front of the vehicle; 2. High beam: To view distant road conditions; 3. License plate light: To illuminate the vehicle license plate at night; 4. Hazard warning light: To alert vehicles behind to yield; 5. Running light: To attract the attention of other traffic participants; 6. Fog light: Strong penetration in fog, making it easy for vehicles and pedestrians to notice early; 7. Brake light: To warn people or vehicles behind.
18
2
Share

How to reset the maintenance light on Hyundai ix35?

The steps to reset the maintenance light on Hyundai ix35 are: 1. Turn off the ignition switch; 2. Press the clock adjustment button 'set' while turning on the ignition switch; 3. Release the 'set' button, then press the 'set' button once more; 4. Turn off the ignition switch, then turn it on again to check if the light has been reset. If not, repeat the above steps. Taking the 2021 Hyundai ix35 as an example, it is equipped with a 2.0L turbocharged engine, with a maximum horsepower of 160ps and a maximum power of 118kw, paired with a 6-speed automatic transmission. The body dimensions of the 2021 Hyundai ix35 are: length 4500mm, width 1850mm, height 1680mm, with a wheelbase of 2640mm.
12
5
Share

Where is the fuel pump located in the Tiguan?

The fuel pump in the Tiguan is positioned above the fuel tank. The Volkswagen Tiguan's fuel pump transports fuel to the fuel lines. Unlike older mechanical fuel pumps, the Tiguan uses an electric fuel pump. The drawbacks of automotive fuel pumps include insufficient heat dissipation and high noise levels, which is why the Tiguan's fuel pump is typically installed inside the fuel tank. Below is an introduction to the fuel pump's features: 1. Function: Gasoline serves to cool and lubricate the fuel pump. Failing to refuel promptly after the fuel warning light comes on can reduce cooling and lubrication, potentially causing damage. 2. Fuel Quality: Impurities in low-quality gasoline can clog the fuel supply system and wear out the fuel pump, leading to failure. Early fuel pump failures are often caused by the use of substandard fuel. 3. Electric Pump: The electric fuel pump operates via electromagnetic force to repeatedly move the pump diaphragm, rather than being driven by a camshaft. This allows for flexible installation positioning and helps prevent vapor lock.
18
3
Share

Where is the cabin air filter located in the Changan Yuexiang?

The cabin air filter in the Changan Yuexiang is located inside the glove compartment on the passenger side. The function of the cabin air filter is to filter dust particles from the air, providing clean air for the vehicle's air conditioning system. Taking the 2019 Changan Yuexiang as an example, its body structure is a 4-door, 5-seater sedan with the following dimensions: length 4390mm, width 1725mm, height 1490mm, wheelbase 2535mm, fuel tank capacity 40 liters, and curb weight 1050kg. The 2019 Changan Yuexiang features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L naturally aspirated engine producing a maximum horsepower of 101PS, maximum power of 74kW, and maximum torque of 135Nm.
17
1
Share

Is the Right Side of an Automatic Transmission the Accelerator?

In an automatic transmission vehicle, the accelerator is located on the right side, positioned in front of the central armrest on the right-hand side, making it immediately visible upon entering the car. The primary reason for this design is the frequent use of the accelerator, which is placed on the outer side of the right foot for a more comfortable posture. The brake is set on the inner side of the right foot, with the brake pedal slightly higher than the accelerator pedal to facilitate quick reactions from the driver. The correct operation method involves pivoting the right heel and using the ball of the foot to press the pedals. The accelerator position is controlled by the driver in the cockpit through the throttle lever, which transmits commands via linkage systems such as rods, rockers, torque tubes, cables, pulleys, and sector gears to the carburetor or fuel regulator on the engine.
1
3
Share

How to switch to S gear in Audi A3?

Audi A3 can be switched to S gear by pulling the gear lever to the S position. Precautions for shifting gears in automatic transmission cars: 1. Ensure the gear is in N or P position before starting the engine, and remember to press the brake pedal when starting; 2. Gear shifting should be timely, accurate, decisive, and quick, avoiding any delay; 3. Upshift after acceleration and downshift after deceleration; 4. Use D gear for driving on flat and straight roads; 5. No need to press the shift button when switching between N, D, and 3 gears. The front suspension of the Audi A3 is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 150 PS, a maximum power of 110 kW, and a maximum torque of 250 Nm. It is paired with a 7-speed dual-clutch transmission.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.