How to Start a Long-Term Parked Motorcycle?

1 Answers
OAngela
07/29/25 5:05pm
When starting, do not throttle, and after several unsuccessful attempts, slightly apply throttle. Check if the automatic choke is stuck in the closed position, meaning it remains extended and does not retract. Inspect the engine's compression. If the valves are leaking or the engine is severely worn, it will be difficult to start when cold, and engine repair may be necessary. Park the motorcycle indoors or in a warmer location. Before starting, do not turn the key; instead, press the kick starter a few times, then turn the key and use the kick starter. When starting the motorcycle, it is necessary to close the choke valve.
Was this review help?
3
2
Share
More Forum Discussions

What is the safe distance for a car?

The safe distance for a car is: 1. Maintain 40 meters when the speed is 40 kilometers per hour; 2. Maintain 60 meters when the speed is 60 kilometers per hour; 3. Maintain 10 meters when the speed drops to 20 kilometers per hour; 4. Maintain 5 meters when the speed is 15 kilometers per hour. The safe distance refers to the necessary gap that the following vehicle maintains with the vehicle ahead to avoid accidental collisions while driving. The methods to judge the distance while driving are: 1. When the lower edge of the rear wheel of the front vehicle is level with the lower edge of the windshield, the distance is about 3 to 5 meters; 2. When the lower edge of the front vehicle's bumper is level with the lower edge of the windshield, the distance is about 2 meters; 3. When the upper edge of the front vehicle's bumper is level with the lower edge of the windshield, the distance is about 0.5 to 1 meter.
7
2
Share

How to Replace the Battery in a Fengyun 2 Key?

Steps to replace the key battery for the Chery Fengyun 2 are as follows: 1. Press the button on the side of the key to remove the mechanical key. 2. Then, pry open the key along the seam, remove the old battery, and replace it with a new one. 3. Reassemble the key and reinsert the mechanical key. Here is some information about the Chery Fengyun 2: 1. The Fengyun 2 is equipped with a CAC-SQR477F engine, with a maximum power of 80KW/6000rpm and a maximum torque of 140Nm/3000rpm. The specific power of this engine reaches 53.44Kw/l. 2. In terms of the chassis, the Fengyun 2 does not differ significantly from other models in the Fengyun series, featuring a front MacPherson strut and rear twist-beam suspension. 3. The car's power performance is only satisfactory when the engine reaches around 3000 rpm, which may result in a feeling of insufficient power.
16
1
Share

Where is the best position for car mirrors?

The principle for adjusting mirrors to the best position is to minimize blind spots as much as possible. The smaller the blind spot range, the higher the driving safety factor. Below are the adjustment methods for rearview mirrors during normal driving: 1. Interior rearview mirror: The main function of the interior rearview mirror is to see the situation of the vehicles behind. It should be adjusted to the angle that provides the widest possible view of the rear. Adjust the four corners of the interior rearview mirror so that the four corners of the rear windshield are visible. This angle provides the maximum field of view. 2. Two exterior mirrors: First, adjust the tilt angle of the mirrors, ensuring that the car body occupies one-fourth of the mirror. Then, adjust the elevation angle of the mirrors. For the left mirror, adjust it so that the sky and ground each occupy half of the mirror, with the center line being the mirror's midline. For the right mirror, due to the driver's position, adjust it so that the sky occupies two-thirds of the mirror and the ground occupies one-third.
3
4
Share

What to Do When There's a Car Ahead During Overtaking in Subject 3?

The solutions when encountering a car ahead during overtaking in Subject 3 are as follows: 1. Follow the examiner's instructions. If there is a vehicle ahead when the voice command is issued, simply follow the examiner's orders. Upon hearing the voice prompt 'Please complete the overtaking maneuver,' turn on the left turn signal (maintain for more than 3 seconds), while observing the traffic behind through the (left) rearview mirror. After confirming safety, steer left to enter the left overtaking lane. After overtaking the vehicle ahead and ensuring a safe distance, turn on the right turn signal (maintain for more than 3 seconds), while observing the traffic behind through the (right) rearview mirror. After confirming safety, return to the original lane and continue driving normally. 2. If the examiner prohibits speaking, you can stop outside the test section and wait for the car ahead to move away. Remember to engage the handbrake when stopping. When starting again, you don't need to follow the initial starting procedure, but you must start in first gear, shift to second gear by pressing the accelerator, and then shift to third gear.
19
3
Share

What are the differences between Beijing Jeep and Jeep?

Differences between Beijing Jeep and Jeep: 1. Different brand histories: Beijing Jeep officially began operations on January 15, 1984, as a joint venture brand between Beijing Automotive Industry Holding Co., Ltd. (BAIC), DaimlerChrysler Corporation (DCC), and DaimlerChrysler (China) Investment Co., Ltd. (DCCL), involving Chinese, American, and German partnerships; Jeep is an automobile brand. 2. Different main production models: Beijing Jeep primarily produces models such as the Jeep 4700/4000, Jeep 2500, Mitsubishi Pajero Sport, Mitsubishi Outlander, and military light off-road command vehicles; Jeep mainly produces models like the Wrangler, Compass, Renegade, Cherokee, Grand Cherokee, Commander, and Grand Commander. 3. Different development paths: Beijing Automotive Industry Holding Co., Ltd. also signed a strategic cooperation framework agreement with DaimlerChrysler AG. Recent cooperative projects include the restructuring of Beijing Jeep Automobile Co., Ltd., with plans to produce Mercedes-Benz E-Class and C-Class sedans. Beijing Jeep Company has evolved from initially focusing on off-road vehicle production to simultaneously developing off-road vehicles, SUVs, and high-end sedans.
9
3
Share

Is the Spare Tire Wheel of the Lynk & Co 03 the Same as the Original Wheel?

Lynk & Co 03's spare tire wheel is not the same as the original, which may cause imbalance. Types of spare tires: 1. Full-size spare tire: The specifications of a full-size spare tire are exactly the same as the other four tires on the vehicle, allowing it to replace any temporarily or permanently unusable tire. 2. Non-full-size spare tire: The diameter and width of this type of spare tire are slightly smaller than the other four tires, making it suitable only for temporary replacement. It can only be used on non-driving wheels, and the maximum speed should not exceed 80km/h. 3. Run-flat tire: Also known as a safety tire or commonly referred to as a "run-flat tire," it is professionally translated as "tire that can run when flat." Compared to ordinary tires, run-flat tires do not leak or leak very slowly when punctured, maintaining the driving profile, and the tire bead remains fixed on the rim, ensuring the vehicle can drive to a service station for a long time or temporarily stable. Therefore, vehicles equipped with such tires no longer need to carry a spare tire, effectively hiding the spare tire in another way on the four tires.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.