How to start a Leiling car?

What is the maximum wading depth of the Volvo XC60?

According to official information, the maximum wading depth of the Volvo XC60 is 35 cm. Common tire specifications include 235/60R18 and 235/55R19, with a body length of 4708 mm. The vehicle is equipped with an 8-speed automatic transmission (AT) and is a 5-door, 5-seat SUV. The maximum wading depth refers to the deepest water level a vehicle can safely pass through. Generally, the maximum wading depth for sedans does not exceed 30 cm, while SUVs have a higher wading depth, though it is still advisable not to exceed 50 cm. Among common models, the GAC Trumpchi GS8 has a maximum wading depth of 30 cm, the Audi A4 has 32 cm, the Volkswagen Sagitar has 30 cm, the Land Rover Range Rover has 90 cm, the Jeep Compass has 48 cm, and the Highlander has 45 cm. The maximum wading depth of SUVs is significantly higher than that of sedans. Generally, when driving through water, vehicle owners should take different measures depending on the water depth and the vehicle's characteristics, as detailed below: If the wading depth reaches the height of the exhaust pipe, it is relatively safe. Even if water enters the exhaust pipe, the pressure inside is sufficient to expel the water. As long as the engine is not turned off in the water, water will not flow back into the vehicle. If the wading depth reaches the height of the door frame, it becomes more dangerous. The vehicle's circuits, electronic components, and sensors are mostly concentrated at the bottom of the car, which may lead to circuit disconnection, damaging critical electrical components and preventing the car from starting normally. If the wading depth reaches the height of the intake pipe, it is extremely dangerous. Driving directly into such water may cause the vehicle to stall immediately, resulting in permanent engine damage or rendering the engine unusable.

11

2

Share

How to Turn Off a NIO Vehicle?

To turn off a NIO vehicle, park the car, shift to P gear, and press the lock button on the key fob to automatically shut down the engine. Below is relevant information about NIO vehicles: 1. Main Products: NIO primarily manufactures intelligent electric vehicles as a global brand. Its main product lineup includes the NIO ES6, NIO ES8, NIO EC6, NIO EVE, and NIO EP9. 2. Safety Features: Taking the NIO ES6 as an example, safety configurations encompass front/side airbags for driver and passenger, front/rear head airbags, seatbelt reminder, rear child seat anchors, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, electronic stability control, blind-spot monitoring, lane departure warning, autonomous emergency braking, and fatigue driving alert. 3. Assistance Systems: These include front/rear parking sensors, 360-degree surround-view camera, cruise control, drive mode selection, engine start-stop technology, auto hold, hill start assist, hill descent control, adjustable suspension stiffness, panoramic sunroof, power tailgate, hands-free tailgate, keyless ignition, keyless entry, active grille shutters, remote start, and battery pre-conditioning.

12

5

Share

Do vehicles for ride-hailing need to be converted to commercial use?

Private cars used for ride-hailing need to be converted to commercial use. New requirements have been introduced for ride-hailing platform companies, vehicles, and drivers, stipulating that private cars joining ride-hailing platforms must change their vehicle attributes to commercial use. More details are as follows: 1. Method: The Ministry of Transport, in collaboration with multiple ministries, has issued documents requiring platform companies and vehicles to obtain road transport operation licenses, with vehicles also needing an operation permit. The guidelines do not specify requirements for commercial vehicle attributes, but private cars must change their attributes to commercial use if they are to operate as ride-hailing vehicles. 2. Legal Basis: According to the 'Interim Measures for the Management of Online Car-Hailing Services,' applicants must possess both online and offline service capabilities to engage in ride-hailing operations. Online service capabilities are certified once by provincial authorities in the company's registered location and are valid nationwide.

16

1

Share

How many days before and after the driver's license review date can the review be conducted?

Here is the introduction regarding the driver's license review date: 1. For drivers holding a Class C driver's license: The annual review of the driver's license is conducted when renewing the license upon its expiration. The owner can go through the process up to three months before the license expires, which means 90 days in advance. If the owner forgets to process it, there is no need to worry, as there is a grace period after the license expires. If it has been less than a year since the expiration, the owner can still follow the normal renewal process and undergo the annual review. 2. For drivers holding Class A or B licenses: Drivers holding licenses for large buses, tractors, city buses, medium-sized buses, and large trucks must undergo an annual review at the traffic management department of the public security authority within 30 days after the end of each scoring cycle. If there are no demerit points recorded during a scoring cycle, the review for that cycle is exempted.

2

0

Share

What is the displacement of 220t?

220t is equivalent to a turbocharged engine with a displacement of 1.5 liters. Below is an introduction to turbocharged engines: 1. Turbocharger: A turbocharger consists of two parts: a compression turbine and an exhaust turbine. The working principle of a turbocharged engine is very simple. When the engine reaches a certain speed, the exhaust gas will have enough energy to drive the exhaust turbine to rotate. At this time, the compression turbine will also rotate together, allowing the compression turbine to compress air and blow it into the cylinders. 2. Precautions: If you have just driven a car with a turbocharged engine at high speed or on a long-distance trip, you can let the engine idle for a few minutes before turning it off. This helps to dissipate heat from the turbocharger.

18

5

Share

Is There a Time Interval for the Second Appointment of Subject One?

There are two scenarios for the second appointment of Subject One: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," one scenario allows for two attempts on the same day. If the first attempt is unsuccessful, the second can be taken immediately or arranged after all other examinees have completed their tests. The other scenario requires a 10-day waiting period before reapplying if both attempts are unsuccessful. Subject One, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. The test covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is computer-based with a time limit of 45 minutes. A passing score is 90 out of 100, with the test consisting of 100 questions—single-choice and true/false questions, each worth 1 point. If 11 questions are answered incorrectly, the system will automatically submit the test and end the session. Subject One test content includes: driver's license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject One test precautions: Examinees should dress appropriately—no slippers allowed. Electronic devices and bags are prohibited in the test room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen before entering the test room and store personal belongings in lockers. Upon entering, verify your identity at the assigned station, find your seat, and begin the test. Ensure the camera is aligned with you and follow test discipline. If you fail the first attempt, a retake is available the same day. If you fail again, you must pay to reschedule. After completion, queue to collect and sign your score report—unsigned reports are invalid. Subject One has no limit on the number of attempts, but Subject Two and Subject Three allow only five attempts each. If all five attempts are unsuccessful, the previously passed road driving skills test scores remain valid. The driver's license test consists of three subjects: Subject One, Subject Two, and Subject Three. Subject One refers to the test on road traffic safety laws, regulations, and related knowledge. Subject Two refers to the field driving skills test. Subject Three is divided into two parts: road driving skills and safety and civilized driving knowledge. The safety and civilized driving knowledge test is conducted after Subject Three, hence it is commonly referred to as Subject Four. However, the official terminology (as per the Ministry of Public Security's Order No. 123) does not include the term "Subject Four."

3

Share

How to start a Leiling car?

What is the maximum wading depth of the Volvo XC60?

How to Turn Off a NIO Vehicle?

Do vehicles for ride-hailing need to be converted to commercial use?

How many days before and after the driver's license review date can the review be conducted?

What is the displacement of 220t?

Is There a Time Interval for the Second Appointment of Subject One?

What does restricted brake assist function mean?

Is it necessary to book the test before practicing for Subject 2?

What Causes Motorcycle Power Loss in High Temperatures?

How Long After Signing Up for Subject 2 Before the Test?