How to start a Haval H6 with the key?
2 Answers
Haval H6 key start steps: 1. Remove the cover; 2. Insert the key; 3. Ignite and start. During the starting process, the remote must always remain near the keyhole. There is a coil around the keyhole that can sense the decoding information in the remote's chip. Once the vehicle starts, the remote can be removed. Haval H6 key functions: 1. Lock the car: All door lock motors perform a locking action simultaneously, and the turn signal flashes once; 2. Find the car: When the vehicle is in anti-theft mode, you will hear a long beep and the turn signal will flash for 15 seconds; 3. Alarm deactivation: All door lock motors perform a locking action simultaneously, and the alarm is deactivated; 4. Unlock: All doors perform an unlocking action simultaneously, and the turn signal flashes twice.
I've been driving a Haval H6 for several years, and starting it with the key is particularly handy. First, you sit in the driver's seat, adjust your position and mirrors, and firmly press the brake pedal (if it's an automatic transmission) or the clutch pedal (manual transmission), which prevents rolling issues. Then, insert the key into the ignition hole near the steering wheel, gently turn it to the ON position, allowing the dashboard indicators to light up for a few seconds to warm up the system; then turn it to the START position. Once you hear the engine roar to life, immediately release the key to return it to position. Don't hold it too long, as it can damage the battery. During daily starts, pay attention to whether the key is worn. I once had the keyhole stuck, but it improved after spraying some lubricant. When parking on a slope, make sure to press the brake to prevent slipping, and check if the headlights are working properly before and after starting. These small habits can help avoid major troubles.
