How to Start a Geely Car When the Key Fob Battery Dies?

1 Answers
MicahMarie
07/29/25 3:23am
How to Start a Geely Car When the Key Fob Battery Dies: There is a button on the side of the key fob. Press it and pull out the mechanical key. Generally, the mechanical keyhole is located behind the one-touch start button. You need to pry out the plastic one-touch start button and insert the mechanical key to start the car normally. Alternatively, you can repair or replace the car remote control battery. Below is some information about Geely cars: The Emgrand GS 1.8 is equipped with Geely's first self-developed engine. Initially, this engine was developed by drawing inspiration from Toyota's engine. Later, Geely continuously incorporated its own new technologies, improving and perfecting it, ultimately developing an engine model named JLC-4G18. This 1.8L naturally aspirated engine has a maximum horsepower of 133 PS and a maximum torque of 170 N·m. The Emgrand GS 1.8L engine features DVVT technology, with both the cylinder head and block made of aluminum, and utilizes multi-point fuel injection. This engine has been used in various Geely models multiple times, making it relatively mature in technology and highly reliable.
Was this review help?
14
2
Share
More Forum Discussions

Can a Motorcycle Charger Still Be Used After Getting Wet?

Motorcycle charger cannot be used after getting wet. Reasons: Water in the charger can easily burn out the circuit board and control components, and approaching or touching it may cause irreversible harm to the human body. A wet charger can also lead to malfunctions in electronic components. If the charger remains in operation, it may overcharge the battery, causing damage. Charging Duration Precautions: Disconnect the power promptly after the battery is fully charged. If the power is not turned off for an extended period, the electronic components inside the charger are likely to overheat, which can lead to short circuits and sparks, potentially causing a fire. Charging Environment Precautions: The charging environment must be well-ventilated, with an optimal temperature of 25 degrees Celsius. Avoid exposing the vehicle to direct sunlight or rain during storage. It is best to charge during the day, as nighttime and early morning are the most prone to fire incidents. Therefore, charging should ideally be done during daylight hours with supervision. Maintenance: The charger should be replaced regularly, and an original manufacturer's charger should be used. If the wiring is aged or the electric vehicle's battery itself has issues, it can easily lead to a fire. The combination of these factors increases the risk significantly.
4
5
Share

Does Cruise Control Affect the Transmission?

Electronic control gear, continuous use of cruise control in this manner will not affect the dual-clutch transmission. Components of the cruise control system: Switch buttons, instrument indicator lights, engine control module (ECM), electronic throttle, clutch pedal switch, brake switch, and parking brake switch. Methods to turn off cruise control: Depress the brake pedal or clutch pedal to temporarily deactivate it. Press the off switch to turn it off. If the vehicle speed decreases by approximately 13 kilometers per hour relative to the set speed, cruise control will automatically cancel. Moving the gear selector to the N position will cancel cruise control, and the SET indicator light will turn off.
10
3
Share

What's the reason for the motorcycle temperature gauge not moving?

Temperature gauge not moving indicates a malfunction in the temperature sensor. Possible causes include damaged temperature sensor or faulty gauge: First, check if the wiring connections are broken or loose. If they're intact, then either the temperature sensor or the gauge is defective. You can unplug the temperature sensor connector and ground the wire. Turn the ignition key to see if the temperature gauge moves. If it moves, the temperature sensor is faulty; if it doesn't, replace the gauge. Other possible reasons: Poor connection or open circuit in the temperature gauge sensor wiring. Failure of the voltage regulator supplying stable power to the temperature gauge circuit. Open circuit in the temperature gauge power supply line. Burnout of the temperature gauge heating coil. Burnout of the temperature sensor heating coil or poor contact at the terminals.
12
4
Share

Where can I check motorcycle traffic violations?

Motorcycle traffic violations can be checked on mobile phones. You can use WeChat on your mobile phone to check. After entering the WeChat wallet, find and click on City Services. Impact of not handling motorcycle traffic violations: The "Procedures for the Handling of Road Traffic Safety Violations" issued by the Ministry of Public Security stipulates the upper limit of late fees. If the fine is not paid by the due date, an additional fine of 3% of the fine amount will be imposed per day, but the total fine shall not exceed the original fine amount. Late fees are no longer charged for traffic violation penalties during operation, but they can be handled on-site at the vehicle management office during the annual inspection. The cumulative record of violations on the driver's license shall not exceed 5 times. Otherwise, the traffic police will impound the vehicle during roadside checks until all violations are handled, after which the vehicle can be retrieved. For violations recorded on the driver's license, they should be handled before the end of the one-year scoring cycle. Otherwise, unhandled violations will be carried over to the next cycle. During the scoring cycle, it is highly likely to accumulate 12 points, leading to the revocation of the driver's license.
7
2
Share

What is the reason for keeping to the right when reversing into the right parking space?

The reason for keeping to the right when reversing into the right parking space is turning the steering wheel too early. Adjustment for early steering wheel turning: If the steering wheel is turned too early, you need to straighten the steering wheel and adjust the vehicle by turning it back about half a turn. The closer the vehicle is to the line, the larger the angle of correction should be. When the distance between the tire and the corner is appropriate, turn the steering wheel fully to complete the parking. If you want to correct the body position while reversing into the parking space, judge by the distance between the rear of the car and the line. If the rear of the car is tilted to the right and you want to move the car slightly to the left, turn the steering wheel slightly to the left. If you want to correct the body position to the right, turn the steering wheel slightly to the right. Three unexpected situations when reversing into a parking space: If the steering wheel is turned too late, you need to delay straightening it. When correcting the body position, turn the steering wheel in the direction you want to adjust.
20
2
Share

What is the use of the car HDMI interface?

The purpose of the HDMI interface in a car is to input audio and video from other electronic devices into the vehicle's audio-visual system. Here is some relevant information about the HDMI interface: Meaning of the HDMI interface: The HDMI interface in a car refers to the High-Definition Multimedia Interface, which is a fully digital video and audio transmission interface capable of sending uncompressed audio and video signals. HDMI system wiring: HDMI can transmit both audio and video signals simultaneously. Since both signals use the same cable, it greatly simplifies the difficulty of system installation.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.