How to Start a Car with the Remote Control?
3 Answers
Remote control car starting steps are as follows: 1. Aim the key at the vehicle and press the lock button on the key, then hold the remote start button on the key for at least 4 seconds within 5 seconds. 2. Or until the vehicle's turn signals flash, the parking lights will illuminate and remain on while the engine is running. 3. After entering the vehicle during a single remote start session, press the brake pedal and turn the ignition switch to the ON/RUN position to drive the vehicle. Additional information about remote car starting is as follows: 1. The car's smart keyless entry system, abbreviated as PKE, adopts the world's most advanced RFID radio frequency technology and the most sophisticated vehicle identity coding recognition system. It pioneers the development of miniaturized, low-power RF antenna solutions and successfully integrates remote control and keyless systems. 2. This system maintains traditional vehicle circuit protection, truly achieving a dual RF system and dual anti-theft protection, providing maximum convenience and safety for car owners.
I just got a new car last year with a remote start feature, and using the remote to start it is actually quite simple. First, make sure the car is within the remote range—usually within 30 meters for a stable signal. Then, press and hold the engine icon button or the arrow loop symbol on the remote key for about 5 to 8 seconds. When you see the car lights flash a few times, it means the engine has started. At this point, the dashboard will light up, and the air conditioning will turn on automatically, which is especially great for cooling down the car in advance during summer. A few things to note: make sure the windows are closed, otherwise someone might reach inside after the car starts. Also, if the key battery is low, the weak signal might cause the start to fail, so replace the coin battery in time.
Before using the remote to start the vehicle, several conditions must be confirmed: the car should be parked in an open area without signal obstruction, the gear must be in P position, and all doors must be locked. To operate, quickly press the lock button twice in succession and then immediately press and hold the start button. Hearing the engine sound indicates success. In winter, I remotely start the car 10 minutes in advance to warm it up, so the steering wheel and seats are warm when getting in. However, remember two limitations: if the fuel level is too low, the start will be automatically canceled, and each start will run for a maximum of 10 minutes before shutting off to prevent waste from forgetting to turn off the car.
