···
Log in / Register

How to Start a Baojun 510 When the Key Fob Battery Dies?

1 Answers
VonDelaney
07/24/25 3:59am
Baojun 510's mechanical door lock is hidden under the decorative cover of the left front door handle. If the remote key fob battery dies, you can use the mechanical door lock to open the door. Insert the key into the hole under the decorative cover, push the key into the hole while sliding the decorative cover backward to separate it. Lift the handle, then push the edge of the decorative cover to reveal the mechanical door lock. Insert the mechanical key to unlock the door. Below is an introduction to the Baojun 510: 1. The new model maintains the same exterior and interior design, primarily featuring a CVT transmission with economy and sport modes. 2. In terms of power, the new car is equipped with a 1.5L inline-four naturally aspirated engine, delivering a maximum power of 105 horsepower and a maximum torque of 135 Nm, meeting the China VI emission standards. 3. For the transmission system, it is paired with a CVT transmission jointly developed by SAIC Group and Bosch Netherlands. 4. In terms of design, the Baojun 510 adopts a distinctive split headlight design, with LED daytime running lights connected to the large front grille, while the main headlights are positioned on either side of the grille. The rear features conventional halogen tail lights.
Was this review help?
19
3
Share
More Forum Discussions

Detailed Explanation of Various Warning Lights on Polo Dashboard

Detailed explanation of various warning lights on Polo dashboard is as follows: Seat Belt Warning Light: Indicates whether the seat belt is locked. When this light is on, it means the seat belt is not properly fastened. Door Warning Light: Displays the status of all vehicle doors. It illuminates when any door is not closed or not properly shut. Oil Pressure Warning Light: Shows the oil pressure condition in the engine. It lights up when the ignition is turned on and the vehicle begins self-check, then turns off after the engine starts. Fuel Level Warning Light: Indicates the amount of fuel in the vehicle. When the ignition is turned on and the vehicle performs self-check, this light will briefly illuminate and then turn off. ABS Warning Light: Displays the working status of the ABS system. When the ignition is turned on and the vehicle performs self-check, the ABS light will illuminate for a few seconds and then turn off. Handbrake Warning Light: Shows the status of the handbrake. Normally, it is off. When the handbrake is engaged, this light automatically turns on. When the handbrake is released, the light automatically turns off.
16
3
Share

How to Replace the Battery in a New Magotan Key Fob When It Runs Out of Power?

The method to replace the battery in a New Magotan key fob is as follows: 1. Remove the silver decorative piece at the bottom of the key by pushing it sideways toward the hidden button with your thumb; 2. Take off the silver decorative cover; 3. Open the rear cover of the key, pry open the back cover, remove the old battery, and replace it with a new one. The dimensions of the New Magotan are 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm and a fuel tank capacity of 66L. Its engine delivers a maximum horsepower of 150Ps, a maximum power output of 110kW, a maximum torque of 250Nm, and a maximum torque speed range of 1750 to 3000rpm.
11
2
Share

How many liters of engine oil does the Audi A6L 2.0 need?

Audi A6L 2.0 requires 4.5 liters of engine oil. If there is an oil burning phenomenon, it is recommended to fill 5L of engine oil. Audi A6L interior design: The entire series comes standard with the Audi virtual cockpit. The car is equipped with a 10.1-inch display screen, with an 8.6-inch touch screen below. The instrument panel uses a 12.3-inch full LCD dashboard, equipped with the latest MMI system, providing intelligent search suggestions, voice control, Car-to-X services and other functions. Audi A6L power configuration: The Audi A6L is powered by a new generation of 2.0L/3.0L turbocharged engines, intelligent four-wheel drive system, and 12V/48V mild hybrid and other diversified combinations. The maximum power is 250kW, the maximum torque is 500 Nm, the maximum horsepower is 340Ps, and it is equipped with a 7-speed wet dual-clutch transmission (DCT). The driving modes include standard comfort, ECO, and sport.
3
1
Share

What causes white smoke from a truck's exhaust pipe?

There are several possible reasons for white smoke coming from a truck's exhaust pipe: 1. Dirty air filter: This can lead to insufficient air intake, or it may be due to a malfunctioning carburetor. 2. Exhaust gas emission: Normal white smoke is caused by the emission of exhaust gases from the pipe. When these gases reach a certain temperature, they condense into water droplets. 3. Degraded engine oil: High temperatures in the cylinder can cause gases to enter the oil pan, leading to oil degradation, which is a very common issue. 4. Complete engine combustion.
3
1
Share

What Are the Reasons for Difficult Car Starting in Cold Weather?

The reasons for difficult car starting in cold weather include a depleted car battery; low temperatures reducing the viscosity and rotation speed of car engine oil; issues with the ignition system; insufficient car fuel; excessive carbon deposits inside the vehicle's engine; and damage to the fuel pump, preventing fuel in the tank from being supplied for combustion. Solutions for difficult car starting in cold weather: push-starting the car; jump-starting with cables, ensuring positive connects to positive and negative to negative; promptly replenishing the battery charge; replacing with suitable engine oil; timely replacement of spark plugs; periodic cleaning of the electronic throttle; adding antifreeze; parking the car indoors or in an underground parking lot. Points to note when driving in cold weather: Do not attempt to start the car more than 3 times in a row. Many cars have difficulty starting in low temperatures, and sometimes may stall while driving. The starting time should preferably be controlled within 5 seconds. If the car does not start after 3 attempts, wait a few minutes before trying again to avoid damaging the battery; turn on the radio and other electrical devices only after the engine is running, and turn off electrical facilities before shutting down the engine when parking, as the battery continues to discharge after the vehicle is turned off at night; after starting the car, do not rush to drive at high speeds. Allow time for the engine to warm up, start in the lowest gear, and gradually accelerate to give the car time to adapt, which can improve fuel economy.
17
1
Share

Why Does a China VI Compliant New Vehicle Exceed Exhaust Emission Standards?

Reasons for excessive vehicle exhaust emissions: 1. Abnormal engine operation: The engine may experience cylinder misfiring, spark plug oil leakage, or oil channeling. When accelerating, the engine runs unevenly and lacks power. 2. Contaminated three major vehicle systems: This situation typically occurs in relatively new vehicles where test results show slight exceedances of a few percent or decimal points. It indicates that the vehicle's exhaust treatment system (including the three-way catalytic converter and oxygen sensor) isn't significantly faulty. The emission exceedance may be caused by contamination in the three major systems (intake system, exhaust system, and fuel system). 3. Three-way catalytic converter failure: This represents the primary cause of excessive vehicle exhaust emissions.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.