How to spray windshield washer fluid on the front window?

What Causes the Abnormal Noise When Accelerating in Mitsubishi Outlander?

Abnormal noise when accelerating in a Mitsubishi Outlander may be caused by excessive carbon deposits, poor filtration, or insufficient gasoline purity. It is recommended to clean the air filter in a timely manner. Specific causes: The noise could be due to aging spark plugs, engine issues, cylinder problems, or idle speed problems. If the air filter is clogged or excessively dirty, it can restrict engine airflow, allowing large amounts of dust to enter the cylinders. This accelerates carbon buildup in the cylinders, leading to poor engine ignition, reduced power, and increased fuel consumption. Solutions: Noise caused by excessive carbon deposits can be categorized into engine carbon buildup, throttle carbon buildup, or spark plug carbon buildup. For noise caused by poor filtration, the most common issue is a dirty air filter, which can be resolved by cleaning or replacing it at a repair shop. Carbon deposits formed inside the engine due to low gasoline purity (e.g., 90-octane gasoline being less pure than 93-octane) can be addressed by completely switching to higher-octane gasoline.

4

3

Share

What are the causes of engine shaking?

Engine shaking causes: 1. High-voltage line breakage refers to the disconnection of the high-voltage wire core, affecting ignition and causing abnormal engine shaking; 2. Check if the spark plugs need replacement, as electric spark plugs have a lifespan - after exceeding 30,000 kilometers, ignition efficiency will significantly decrease, which may affect ignition; 3. Excessively dirty air filter; 4. Abnormal engine coolant temperature - if the temperature is too high or too low, it will alter the air-fuel mixture ratio, causing adhesion and reduced lubrication, leading to abnormal engine shaking; 5. Engine idle speed too low - engine idle speeds are set by the vehicle's computer. When the engine speed drops below a certain range, the car's computer will automatically adjust it. If the idle speed is too low, shaking will occur.

7

3

Share

Where is the fuel tank located on a Corolla?

The fuel tank of the Corolla is located on the left rear underside of the vehicle, with a total capacity of 55 liters. Before refueling, ensure the engine switch is turned off and all doors and windows are closed. The recommended fuel type is unleaded gasoline with an octane rating of 92 or higher. The Corolla is equipped with Michelin 215/45R17 tires, TRD Sportivo high-performance shock absorbers, and 17-inch TRD TF4 sport rims, ensuring excellent sporty performance. As a compact sedan, the Corolla measures 4630mm in length, 1775mm in width, and 1480mm in height, with a wheelbase of 2700mm.

1

5

Share

What is the tire model of the CS55?

The tire models of the CS55 are 225/55R18 and 225/60R17. The Changan CS55 uses Continental tires. As one of the important components of a vehicle, tires serve the following functions: supporting the entire weight of the vehicle, bearing the load of the car; transmitting traction and braking torque, ensuring the adhesion between the wheels and the road. The Changan CS55 is an SUV model with dimensions of 4500mm in length, 1855mm in width, and 1690mm in height, and a wheelbase of 2650mm. The CS55 features a multi-link independent rear suspension and an enhanced MacPherson independent front suspension, providing a comfortable chassis. The rear suspension allows for adjustment of toe and camber, ensuring precise four-wheel alignment. The front suspension is equipped with a high-strength anti-roll bar, delivering smoother cornering response.

9

1

Share

Why is there a noise when braking in Audi Q3?

Audi Q3 braking noise is caused by impurities on the brake pads. Simply remove the brake pads and sand them down with sandpaper. If you hear unusual noises when braking, you should visit a 4S shop to check if the brake pads are of normal thickness. Generally, brake pads need to be replaced after driving more than 80,000 kilometers. The Audi Q3 is an SUV based on the same PQ35 platform as the Volkswagen Tiguan, positioned below the Q7 and Q5 in the Audi model series. The Audi Q3 has dimensions of 4385mm in length, 1831mm in width, and 1608mm in height, with a wheelbase of 2603mm. The Audi Q3 uses a front MacPherson and rear four-link suspension structure, with a comfortably tuned chassis and good off-road capability.

7

0

Share

How to correctly use the automatic parking function in BMW X3?

Correct usage method for BMW X3 automatic parking: Press the AUTOH button below the gear shift, and the light above will illuminate. When waiting at a red light, come to a complete stop with your foot on the brake, then you can remove your foot. When the light turns green, press the accelerator. The AUTOH function is not enabled by default but requires manual activation by the driver. The BMW X3 is an SUV model that introduces the new SUV Sports Activity Vehicle concept and is equipped with BMW's patented xDrive intelligent all-wheel-drive system. The dimensions of the BMW X3 are 4648mm in length, 1881mm in width, and 1661mm in height, with a wheelbase of 2810mm. The BMW X3 features front-engine four-wheel drive, a front suspension type of double-joint spring strut front axle, and a rear suspension type of multi-link aluminum integral rear axle.

9

2

Share

How to spray windshield washer fluid on the front window?

What Causes the Abnormal Noise When Accelerating in Mitsubishi Outlander?

What are the causes of engine shaking?

Where is the fuel tank located on a Corolla?

What is the tire model of the CS55?

Why is there a noise when braking in Audi Q3?

How to correctly use the automatic parking function in BMW X3?

What brand is the CAC model?

How to turn on the fog lights on the Lamando?

What is the fuel consumption of the 7.5th generation Accord 2.4?

Why was the 2021 Geely Vision X3 Pro discontinued?