···
Log in / Register

How to Spray Windshield Washer Fluid on Lavida?

3 Answers
Caroline
07/30/25 2:39am
Lavida sprays windshield washer fluid by: Simply turn the ignition switch to the ON position, then slightly lift the wiper control lever on the right side of the steering wheel to activate the spray. When the transparency of the front windshield deteriorates, spraying some washer fluid will restore a clear and bright view. Especially during nighttime driving, dust on the glass can scatter light, making it necessary to spray washer fluid to maintain optimal transparency of the front windshield. Uses of automotive windshield washer fluid: Widely used for quick decontamination and bright cleaning of various glass surfaces including car windows, rearview mirrors, household glass, office glass, door/window glass, and decorative glass.
Was this review help?
8
3
Share
NolanFitz
08/16/25 8:54am
When driving my Lavida, operating the windshield washer is very simple: Sit in the driver's seat, grab the wiper control stalk on the right side of the steering wheel with your right hand, and gently pull it toward yourself. This action will spray washer fluid from above the windshield while automatically activating the wipers a few times to clear away dirt. Remember to perform this operation when parked or at low speeds for safety, avoiding high speeds where strong winds may waste fluid or cause blurring. It's especially useful when there's heavy dust or poor visibility during rain. If no fluid sprays or the effect is poor, it may indicate low washer fluid level – time for a refill: Open the front hood, locate the small bucket-shaped container near the wiper system (cap marked 'Washer Fluid'), and fill it with dedicated windshield washer fluid up to the max line. I recommend using winter-grade antifreeze fluid to prevent nozzle clogging from freezing in cold weather. Develop the habit of regularly checking fluid levels instead of waiting until empty – this helps prolong the system's lifespan.
Was this review help?
1
0
Share
Expand All
LaSpencer
10/21/25 7:33am
As someone who has been driving for over a decade, I'm quite familiar with the windshield washer operation in the Lavida: Just pull the control lever on the right side of the steering wheel slightly toward yourself, and the fluid sprays out, working with the wipers to clean the windshield. It's best to operate it at low speeds to avoid distraction and ensure driving safety. The washer fluid reservoir is usually under the hood - simply open the cap to refill, but avoid mixing with plain water as freeze protection and anti-corrosion are key. If the nozzles get clogged, use a fine needle to unclog or wipe them to maintain proper spray. The main purpose is to ensure clear visibility during rain or after snow. When encountering bird droppings or dust while driving, a quick spray gives peace of mind, but avoid excessive use to conserve resources. Remember to check the entire system during car washes to prevent minor issues from developing into malfunctions.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

How to Adjust the Seats in a Passat?

Passat seat adjustment methods: divided into electric adjustment and manual adjustment. Electric adjustment involves a small module shaped like a seat on the left side of the seat; pushing it up, down, forward, or backward as needed can help you find a comfortable position. Manual adjustment includes a pull-up handle located under the seat on the right side for forward and backward movement—lift it and push the seat to adjust. For seat cushion height adjustment, there is a lift-up and push-down armrest on the left side of the seat to adjust the height. The Passat is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum torque of 250 Nm, and a maximum power of 110 kW. The front suspension of this car is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension.
14
0
Share

What are the components of a wheel structure?

Wheels are typically composed of a rim and spokes. The rim is the component that mounts and supports the tire on the wheel, while the spokes are the supporting components between the axle and the rim on the wheel. In addition to these components, wheels sometimes also include a hub. The rim is the part that mounts and supports the tire around the circumference of the wheel, forming the wheel together with the spokes. The rim and spokes can be integral, permanently connected, or detachable. The spokes are devices that protect the wheel rim and spokes of a vehicle's wheel, characterized by a pair of circular cover plates with diameters similar to that of the wheel rim. Based on the structure of the spokes, wheels are divided into disc-type and spoke-type. Currently, mainstream family cars mostly adopt disc-type spoke structures. The hub is a cylindrical metal component that supports the tire within its inner contour and is mounted centrally on the axle. It is also known as the wheel rim, steel rim, or wheel disc. Hubs come in a wide variety of types based on diameter, width, forming method, and material.
10
3
Share

What is the function of the oil pressure gauge?

The function of the oil pressure gauge is to detect and display the oil pressure in the engine's main oil passage to prevent major failures such as cylinder scuffing and bearing burning due to insufficient oil. The oil pressure gauge is used to indicate the oil pressure in the engine, allowing you to understand whether the engine lubrication system is working properly. It consists of an oil pressure sensor installed on the engine's main oil passage and an oil pressure indicator on the instrument panel. Commonly used oil pressure gauges include bimetallic, electromagnetic, and moving-magnet types, with the bimetallic type being the most widely used. Precautions for using the oil pressure gauge: The oil pressure gauge must be used with its matching voltage regulator and sensor; during installation, ensure good insulation of the terminals and avoid striking during disassembly; for spring-tube type oil pressure gauges, ensure the sealing of the pipe opening to prevent oil leakage. How to use the oil pressure gauge: Park the vehicle on a level surface and wait long enough (2-3 minutes) for the oil to drain back and check if the oil level is too low. Add the recommended grade of engine oil to the crankcase until the oil level reaches the "FULL" mark on the dipstick. Start the engine and confirm that the vehicle's pressure gauge or warning light does not indicate low or no oil pressure. Remove the oil pressure sensor or another engine block oil passage plug.
18
4
Share

What is the fuel tank capacity of the 2016 Elantra?

2016 Elantra has 4 models with a fuel tank capacity of 50 liters. The vehicle is equipped with a 1.6L naturally aspirated engine, and all models use a 6-speed automatic transmission (AT) or a 6-speed manual transmission (MT). Among vehicles in the same class, the 2022 Lavida has a fuel tank capacity of 51 liters, the 2021 Xingrui has a 50-liter tank, and the 2021 Corolla also has a 50-liter tank. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by car manufacturers is measured from the bottom of the tank to the safety level, and there is still some space from the safety level to the tank opening. This space is reserved to allow fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is near E, it indicates low fuel, and when it is close to F, it means the fuel level is sufficient.
2
2
Share

What Causes the Fault Light to Illuminate in the Baojun 730?

The reasons for the engine fault light illuminating in the Baojun 730 include a damaged oxygen sensor, a faulty three-way catalytic converter, or the need to tighten or replace the fuel tank cap. Oxygen Sensor Replacement Needed: The oxygen sensor is crucial for both engine performance and environmental protection. It measures the amount of unburned oxygen in the exhaust to determine if the vehicle's fuel-air mixture is at its optimal state. There are many reasons for oxygen sensor failure, such as not changing the engine oil regularly or failing to clean impurities from the coolant in the engine promptly. If the oxygen sensor fails, fuel consumption may increase by more than 40% compared to normal levels. Three-Way Catalytic Converter Replacement Needed: The three-way catalytic converter usually doesn't encounter issues, but if problems with the spark plugs, ignition coils, or engine mechanical faults are not properly addressed, they can damage the three-way catalytic converter. Tightening or Replacing the Fuel Tank Cap Needed: According to statistics, issues with the fuel tank cap account for 7.1% of vehicle fault investigations in a year, which is not a small probability. If the fuel tank cap is lost or damaged, it can waste both time and money, and of course, the engine fault light will also illuminate. Problems with the fuel tank cap may lead to increased fuel consumption and environmental damage.
18
1
Share

Will an Air-Cooled Motorcycle Overheat on Long-Distance Rides?

An air-cooled motorcycle will not overheat on long-distance rides. Air-cooled motorcycles rely on natural wind during riding to force engine cooling, so as long as the motorcycle maintains a certain speed, it can achieve automatic heat dissipation. Theoretically, because the cooling method of air-cooled motorcycles is relatively traditional, their performance will sharply decrease after prolonged, uninterrupted riding. However, in reality, as long as the engine speed is controlled throughout the entire ride, its cooling method is fully capable of adapting to normal riding conditions. More information about air-cooled motorcycles is as follows: 1. Engine Speed: When the engine speed is too high, it will affect the cooling effect, especially during long-distance rides, where high speed directly determines the current cooling efficiency of the vehicle. Factors directly related to engine speed include driving habits, road conditions, and engine characteristics. 2. Steady-Speed Riding: During long-distance rides on an air-cooled motorcycle, the vehicle's condition mainly depends on the current riding state. Aggressive riding will require more frequent breaks and shorter distances, while steady-speed riding can appropriately extend the distance. Therefore, under the premise of the same total distance, steady-speed riding saves more time compared to aggressive riding and is also more beneficial for both the vehicle and the rider.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.