How to spray windshield washer fluid in Geely Emgrand?

3 Answers
VanElle
07/23/25 5:54pm
The method to spray windshield washer fluid in Geely Emgrand is to pull the wiper lever inward. Geely Emgrand models include: 2021 Manual Comfort, 2021 Manual Luxury, 2021 CVT Comfort, 2021 CVT Luxury, 2021 CVT Up, etc. Taking the 2021 Manual Comfort Geely Emgrand as an example, its body dimensions are: 4632mm in length, 1789mm in width, 1470mm in height, with a wheelbase of 2650mm, a fuel tank capacity of 50 liters, and a body weight of 1255kg. The 2021 Manual Comfort Geely Emgrand features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5T naturally aspirated engine, delivering a maximum horsepower of 109PS, a maximum power of 80kW, and a maximum torque of 142Nm, paired with a 5-speed manual transmission.
Was this review help?
14
0
Share
VanWeston
08/10/25 1:33pm
To be honest, it took me a while to figure out the Emgrand when I first drove it. If you want to spray windshield washer fluid, just locate the wiper control stalk on the right side of the steering wheel, grip it and pull it toward your chest. Apply some force but don't yank too hard - you'll feel a slight click and hear the squirting sound, then the wipers will swipe twice. Remember to check the washer fluid reservoir (the one with the blue cap under the hood) before driving - a bottle of supermarket washer fluid (about 10+ RMB) can fill it up. If it won't spray in winter, the fluid probably can't handle the cold; switch to an antifreeze type rated for -20°C to -30°C. I've also had clogged nozzles - just use a needle to poke the tiny holes to clear them.
Was this review help?
6
2
Share
Expand All
MalachiAnn
09/22/25 8:08am
Operating the windshield washer in an Emgrand is a breeze—just pull the lever on the right side of the steering wheel toward you. I often give it a quick spray at traffic lights for instant clarity. When the washer fluid runs low, locate the blue cap with a water jet symbol on the left side of the engine bay, and refill carefully to avoid spills. Key tip: Avoid using it in freezing temperatures, as standard washer fluid can freeze below zero, risking pipe damage. For the rear window, press the button on the end of the lever—a feature many beginners overlook. I make it a habit to check the fluid level weekly during refueling, especially in summer when bugs and grime accumulate faster.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

What is the ground clearance of the Lynk & Co 01?

The minimum ground clearance (unladen) of the Lynk & Co 01 is 211mm, and the ground clearance when fully loaded is 170mm. Introduction to ground clearance: Ground clearance refers to the distance between the ground and the rigid parts at the bottom of the vehicle. The ground clearance of a vehicle varies depending on whether it is unladen or loaded. Ground clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. Vehicles with lower ground clearance have a lower center of gravity but poorer off-road capability. Impact of minimum ground clearance: The greater the minimum ground clearance, the better the vehicle's ability to pass over obstacles or uneven terrain, but the higher center of gravity reduces stability. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower center of gravity increases stability.
14
0
Share

What Causes the Golf Display Screen to Go Black?

Golf display screen blackout may be caused by issues with the vehicle's power supply voltage. Here are detailed explanations and solutions: Vehicle power supply voltage issues: The solution is to first investigate the stability of the vehicle's power supply voltage to rule out the possibility of voltage fluctuations. Car navigation cable problems: The solution is if the voltage is stable, then check the cables on the back of the device for any issues, which can be resolved by replacing the connections. If there are no contact issues, inspect the display cable of the device; if problems are found, replace it with a new one for testing.
20
1
Share

What causes the airbag light to flash in a Tiida?

The flashing airbag light in a Tiida may be due to loose wiring in the airbag device, a faulty sensor in the airbag device, or a weak battery. Here are detailed explanations and solutions: Loose wiring in the airbag device: Loose or poor contact in the airbag device wiring. There are airbag device wires under the car seat, which may have been accidentally kicked or disturbed by rear-seat passengers, causing them to loosen. The solution is to simply reconnect all the plugs. Faulty sensor in the airbag device: This requires inspection and repair at a professional auto repair facility or 4S shop. Weak battery: A weak battery or abnormal reception device code may be the cause. This requires a professional to check the battery voltage or use a diagnostic device to examine the code and troubleshoot the issue.
6
5
Share

What's the matter with the indirect tire pressure monitoring failure in Golf?

Golf indirect tire pressure monitoring failure may be due to issues with the tire pressure detector or prolonged driving with low tire pressure. Here are detailed explanations and solutions: Problems with the tire pressure detector: The solution is to regularly check whether the tire pressure detector is functioning properly. If the tire pressure monitor does not alert in time when the car has issues, it indicates a problem with the tire pressure monitor. Prolonged driving with low tire pressure: The solution is to stop and rest or replace the spare tire in time. This situation usually occurs when the tire pressure of a certain tire is too low, and high-speed operation causes the tire temperature to rise, leading to an increase in tire pressure.
1
5
Share

What are the reasons for the high fuel consumption of Mazda 6?

The reasons for the high fuel consumption of Mazda 6 include low-quality fuel, severe engine carbon deposits, and excessive vehicle weight. Here are the detailed explanations and solutions: Low-quality fuel: When the fuel added to the car is of low quality, the fuel and mixed gas cannot burn fully in the engine, leading to partial fuel wastage and consequently increased fuel consumption. This situation can be mitigated to some extent by using higher-quality fuel. Severe engine carbon deposits: When the engine carbon deposits are too severe, the fuel cannot be transported normally, resulting in increased fuel consumption and weakened power. In this case, it is necessary to clean the engine carbon deposits promptly. Excessive vehicle weight: When the vehicle weight is too high, it increases the burden on the engine, leading to higher fuel consumption. To address this, the vehicle weight should be reduced.
3
0
Share

How Many Liters of Engine Oil Does the Lynk & Co 02 Require?

According to the manufacturer's manual, the Lynk & Co 02's recommended engine oil specifications are as follows: For the 1.5T version engine, it is recommended to use RBS0-2AE0W-20 engine oil; the oil capacity (with oil filter) is approximately 5.6L, and the oil capacity (without oil filter) is approximately 5.3L. For the 2.0T version engine, it is also recommended to use RBS0-2AE0W-20 engine oil; the oil capacity (with oil filter) is approximately 5.6L, and the oil capacity (without oil filter) is approximately 5.2L. To check the engine oil level: The oil level can be viewed on the dashboard. Without pressing the brake pedal, hold the start button alone for ten seconds, and the oil level will be displayed on the dashboard. When checking, ensure that all four wheels of the car are parked on the same level surface without any tilt. If the car body is tilted, the oil level in the oil pan will change, leading to inaccurate measurement results.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.