How to Spray Windshield Washer Fluid in a Car?

[Carvalho]

To spray windshield washer fluid in a car, follow these steps: Pull the control stalk on the right side of the steering wheel (which also operates the windshield wipers) toward the driver to activate the spray. If no fluid is dispensed when pulling the stalk, avoid repeatedly pulling it, as this may indicate that the washer fluid reservoir is empty. In such cases, check the fluid level and refill it before attempting to use the system again. Windshield washer fluid is a specialized mixture of water, alcohol, and ethylene glycol designed to clean the windshield effectively. It also serves an anti-freezing function for the glass. Additionally, the ethylene glycol in the fluid provides lubrication to the windshield, helping to prevent corrosion of the rubber components in the wiper blades, thereby extending the lifespan of both the windshield and the wipers.

[VonMaverick]

Operating the windshield washer in my own car is quite straightforward. There's a wiper control stalk on the left side of the steering wheel – you just need to gently pull it backward, and the washer fluid will automatically spray onto the windshield while the wipers activate to clear away dirt. The key is to ensure there's fluid in the washer reservoir. Just pop the hood and look for the transparent container labeled 'washer fluid,' checking the level periodically to avoid dry pumping that could damage the washer pump. I usually use dedicated windshield washer fluid because it provides antifreeze protection and cuts through grease much better than plain water. If the spray seems weak, check for clogged nozzles and clear them with a fine needle or replace them; tighten any leaking hoses. After spraying, make sure the wipers leave no streaks or water residue for optimal visibility. In cold weather, switch to antifreeze washer fluid beforehand to prevent system freeze-ups that could disrupt your drive. For maintenance, refill and flush the reservoir every few months to prolong its lifespan.

[CamillaMarie]

When I first started learning to drive, I didn't know how to spray windshield washer fluid and thought there was a button—I searched for a long time before realizing you pull the wiper control lever backward to spray. The first time I tried it, I sprayed water all over myself because I was too close, but luckily it didn't affect my driving. Later, I learned that the washer fluid reservoir is under the hood, a transparent tank for adding water and special cleaning solution—never use tap water to avoid freezing in winter. The spraying action should be gentle; don't yank the lever suddenly to prevent the wipers from startling you by activating abruptly. While driving, if you encounter dust or bird droppings, a quick pull of the lever cleans it right up, but the fluid runs out fast, and I often forget to refill it, leading to empty sprays and warnings—so pay attention. Regularly check the spray nozzles to ensure they aren’t clogged, as low water pressure can blur your vision, which is especially dangerous in rainy conditions. New drivers just need a few tries to get the hang of it—it’s a simple tool anyone can use.

[DeLola]

As a car enthusiast, I appreciate the working principle of the windshield washer system. The electric pump pushes water through the nozzles, atomizing it to evenly cover the glass with a fine effect. Operationally, pulling the wiper stalk backward activates the spray. Maintenance is crucial—I regularly check the reservoir fluid level to prevent dry running and avoid pump damage. Using high-quality windshield washer fluid ensures unclogged nozzles and extends the system's lifespan, suitable for both winter and summer. Always ensure clear visibility when spraying, prioritizing safety. This simple action enhances the driving experience with high reliability.