···
Log in / Register

How to Spray Windshield Washer Fluid?

3 Answers
StJeffrey
07/29/25 9:34am
The method to spray windshield washer fluid is to pull the wiper control lever (the lever on the right side of the steering wheel) toward the driver to activate the spray. Below is relevant information: 1. If you use it frequently, check the washer fluid level. If it is too low, refill it promptly to avoid dry wiping. When the windshield transparency becomes poor, especially during nighttime driving, dust on the glass can scatter light. In such cases, spraying washer fluid helps maintain optimal windshield clarity. 2. Some vehicle models allow adjustment of the wiper's automatic intermittent operation frequency, which varies based on vehicle speed—when the wiper lever is set to "automatic intermittent wiping," the wiper adjusts its frequency according to the selected setting and vehicle speed. There are two main types of adjustment mechanisms for wiper frequency: toggle-style and rotary knob-style.
Was this review help?
4
5
Share
VanFernando
08/12/25 10:31am
When it comes to spraying windshield washer fluid, I’m used to gently pulling the stalk on the right side of the steering wheel backward. Instantly, two jets of water mist shoot out from the front of the car, and the wipers automatically swipe two or three times. You should listen carefully for the buzzing sound of the motor—if there’s no sound, it might mean a blown fuse or clogged nozzles. Last time mine got clogged, I used a sewing needle to clear the spray holes, and it worked like a charm! In summer, remember to use bottled washer fluid instead of tap water, or else mineral deposits will weaken the spray over time. And in winter, you definitely need antifreeze washer fluid—otherwise, the entire fluid line could freeze, and you won’t get any spray until next spring!
Was this review help?
20
3
Share
Expand All
CalvinLee
10/06/25 6:33am
I always dread bird droppings on the windshield and immediately wash them off with washer fluid. Just pull the right stalk toward you for half a second to spray, but you gotta check if the spray angle is right—my car sprays lower on the left and higher on the right, leaving water streaks all over the windshield. Later, I adjusted the nozzle angle with a needle, and it worked much better. Using a ¥3 concentrate mixed with water for washer fluid saves a lot, but you must switch to a -25°C antifreeze type before winter. Once, the washer motor made a creaking noise, and when I opened it up, I found the hose chewed through by a mouse. I had to reconnect the hose and wrap it with tape—what a hassle!
Was this review help?
2
5
Share
Expand All
More Forum Discussions

What is the throttle body matching method for the Vios?

Manual matching method: For mechanically cable-operated throttle bodies, a manual reset method is used. By repeatedly turning the ignition switch on and off several times, the vehicle's onboard computer will delete the original throttle memory and store new throttle data. To verify if the process is successful, simply start the vehicle and check if it runs normally. Below is more information about the throttle body: 1. The throttle body is a controllable valve that regulates the air entering the engine. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to produce power. It connects the air filter at the top and the engine block at the bottom, acting as the throat of the car engine. 2. The throttle body is one of the most critical components in modern fuel-injected engine systems. Its upper part connects to the air filter (air filter element), and the lower part connects to the engine block, serving as the throat of the car engine. The responsiveness of the vehicle's acceleration is closely related to the cleanliness of the throttle body. Cleaning the throttle body can reduce fuel consumption and make the engine more agile and powerful.
4
2
Share

How to Set Up the Navigation Without Sound in MG ZS?

The voice volume setting for the MG ZS navigation can be adjusted through the multifunction steering wheel or the vehicle's settings interface. Here are specific details about the MG ZS: 1. The MG ZS is MG's first internet-connected SUV, officially launched in March 2017. Since its release, it has consistently ranked among the top three in the domestic small SUV market and has repeatedly won the SUV sales championship in markets such as Thailand and the UK. 2. The MG ZS measures 4314mm in length, 1809mm in width, and 1648mm in height, with a wheelbase of 2585mm. 3. The new MG ZS is equipped with a 1.5L engine across all variants, delivering a maximum output power of 88 kW and a maximum torque of 150 N·m, paired with a 5-speed manual transmission. The MIIT-rated combined fuel consumption is 6.1L per 100 kilometers.
3
2
Share

How Often Should the Eclipse Cross Transmission Fluid Be Changed?

The transmission fluid for the Eclipse Cross should be changed every 40,000 kilometers. When replacing the transmission fluid, it is recommended to use high-quality branded transmission fluid, which can effectively protect the gears, reduce wear, make the vehicle run more smoothly, and save fuel. Below are some relevant details: 1. After being used for a period of time, the performance of the transmission fluid will degrade, including a decrease in viscosity and sealing effectiveness. If the transmission fluid is not replaced for a long time, its lubrication effect will weaken, leading to insufficient lubrication, which can affect the operation of the hydraulic system and cause unstable transmission pressure. This is particularly noticeable in manual transmission vehicles, where failure to replace the transmission fluid can result in rough gear shifting and a compromised driving experience. 2. The primary function of transmission fluid is to keep the gear system clean and to lubricate the transmission components, thereby extending their lifespan. Transmission designs vary, including manual transmissions and automatic transmissions (further divided into CVT, AMT, etc.). Each transmission design has specific technical requirements, and even the same transmission model installed in different vehicles may differ in torque, weight, speed, and structure. Therefore, the manufacturer specifies its own dedicated transmission fluid.
8
4
Share

What Causes Excessive Engine Oil Consumption After Long-Distance High-Speed Driving?

Excessive engine oil consumption after long-distance high-speed driving can be attributed to the following reasons: 1. Excessive oil pressure: This may be due to excessively high oil pressure, leading to the rupture of sealing strips and resulting in oil leakage. Alternatively, it could be caused by aging or severely corroded sealing rings, which also result in oil leakage. Another possible reason is excessive clearance between the piston and cylinder wall. Friction between the piston rings and cylinder wall can enlarge this gap, causing the piston to swing within the cylinder. This allows oil to enter the combustion chamber from one side of the piston, increasing engine oil consumption. 2. Excessive wear of the valve guide: This could be due to excessive wear or aging of the valve guide, leading to damage. In such cases, oil can enter the cylinder in large quantities through the gap between the valve stem and valve guide, where it is directly burned. Another possibility is damage to the oil holes in the cylinder gasket, which connects the cylinder and water jacket. This can directly cause oil to enter the cylinder for combustion or enter the engine's cooling system, thereby increasing oil consumption.
10
3
Share

Do Parallel Import Cars Require Tax Payment?

No. Because the price on the invoice when purchasing the car includes tariffs, value-added tax, and consumption tax, there is no need to pay them again. The purchase tax needs to be paid by yourself after buying the car. Here is some relevant information: 1. Advantages of purchasing parallel import cars: outstanding price advantages, advantages in models and delivery time, richer configurations, special models/luxury sports cars, original factory modified models, optimized delivery process, etc. 2. Tariffs are taxes levied by the government's customs on import and export goods as they pass through a country's customs territory. 3. National tax is the national tax system, symmetrical to "local tax", and is a product of a country's tax-sharing system. In the process of developing a socialist market economy, taxes bear the functions of organizing fiscal revenue, regulating the economy, and adjusting social distribution. More than 90% of China's annual fiscal revenue comes from taxes, and its status and role are becoming increasingly important.
10
4
Share

How to Read Tire Model and Date?

Tire model and date can be found on the outer sidewall of the tire, such as 175/70R14. The first number 175 indicates the tire width is 175MM, 70 represents the aspect ratio of the tire section is 70%, meaning the section height is 70% of the width. The letter R stands for radial tire, and 14 denotes the rim diameter is 14 inches. In addition to the model, tires are also marked with the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent the certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard Rim 5.00F".
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.