How to Solve Yellowing Tires?

2 Answers
ODallas
07/30/25 1:35am
Use a tire brush and cleaner to thoroughly clean the wheel tire sidewalls, removing yellow stains, then dry with a lint-free soft cloth. Here is relevant information: 1. Tire discoloration is mostly caused by external erosion from the driving environment. If not severe, spraying and wiping with tire brightener can solve the issue. Discoloration does not constitute a quality defect. 2. Generally, if the surface of the tire turns yellow, it may be due to damage from corrosive liquids or related aging conditions. Overall, if there is no regional cracking or similar issues, it is generally within safe limits.
Was this review help?
1
2
Share
Debra
08/15/25 7:20am
As someone who frequently maintains my car, I've noticed that yellowing tires are mainly caused by oxidation and aging due to the accumulation of dust and oil stains. The solution is quite simple: first, use a brush and mild soapy water to clean off surface dirt, paying special attention to the crevices, then rinse thoroughly with clean water. Next, apply a dedicated tire protectant, such as tire glaze or wax, spreading it evenly to restore the tire's black and shiny appearance. Applying it once a month can prevent recurrence. Remember to park in shaded areas to reduce sun exposure and avoid accelerated tire aging. This is exactly what I've been doing, and my tires have remained in good condition for over two years—looking great and performing well, while also extending their lifespan, saving both money and hassle. Regularly checking your tires after driving and addressing issues early can prevent small problems from becoming big ones.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

What engine displacement does 280tsi correspond to?

280tsi corresponds to a 1.4-liter displacement, which is the tail badge for Volkswagen vehicles. The 280tsi denotes models equipped with a 1.4-liter turbocharged engine. Taking the Passat, a mid-size sedan under the Volkswagen brand, as an example, this engine delivers a maximum power of 110 kW, a maximum torque of 250 Nm, with the maximum power achieved at 5,000 rpm and the maximum torque available between 1,750 to 3,000 rpm. The Passat is a mid-size sedan with body dimensions of 4,933 mm in length, 1,836 mm in width, and 1,469 mm in height, featuring a wheelbase of 2,871 mm. In terms of suspension, the Passat adopts a front MacPherson and rear multi-link suspension setup.
4
2
Share

Where is the transmission oil dipstick on the Hyundai ix35?

The Hyundai ix35 does not have a transmission oil dipstick. There is an overflow valve in the middle of the transmission. After starting the vehicle, open the overflow valve; as long as oil flows out, it is sufficient. The transmission lubricant should be replaced at least every 60,000 kilometers. If driving conditions are harsh, it is recommended to replace it earlier. The Hyundai ix35 has a body length of 4420mm, width of 1820mm, height of 1690mm, and a wheelbase of 2640mm, making it a compact SUV. The vehicle is equipped with a 6-speed automatic transmission, ESP stability control, hill start assist and descent control, brake override system, electronic throttle pedal, and an advanced real-time 4WD system.
3
1
Share

What are the effects of a depleted battery on a car?

The effects of a depleted battery on a car include: 1. Unstable engine idling; 2. Reduced actual fuel injection by the engine; 3. Weakened ignition energy; 4. Inability to deactivate the anti-theft alarm; 5. Locking of the audio system; 6. Abnormal operation of related systems. Precautions for battery maintenance: 1. Avoid parking the car in an open parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent freezing damage; 2. In winter, car engines are harder to start. Each attempt to start the engine should not exceed 5 seconds, with intervals of at least 15 seconds between attempts. Avoid multiple uninterrupted starts, as this can cause the battery to burn out due to excessive discharge.
3
3
Share

What are the differences between Toyota Prado and Toyota Highlander?

The differences between Toyota Prado and Toyota Highlander: 1. Different positioning: Toyota Prado is positioned as a hardcore off-road vehicle; Toyota Highlander is positioned as an urban SUV. 2. Different power: Prado is equipped with a 3.5L naturally aspirated engine; Highlander is equipped with a 2.0T engine across the entire lineup. Prado is a mid-to-large-sized SUV under FAW Toyota, with a length, width, and height of 4840mm, 1885mm, and 1890mm respectively, and a wheelbase of 2790mm. In terms of power, Prado is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 280, a maximum torque of 365 Nm, and a maximum power of 206 kW.
11
5
Share

Why did the Scirocco steering wheel suddenly become heavy?

The reason why the Scirocco steering wheel suddenly becomes heavy is: insufficient power steering fluid. Power steering fluid is the main power source that drives the car, so when the power steering fluid is insufficient, the car naturally becomes difficult to drive. The Scirocco is a two-door, four-seat hatchback sports car. In terms of body dimensions, its length, width, and height are 4256 mm, 1810 mm, and 1400 mm respectively, with a wheelbase of 2578 mm. In terms of power, the Scirocco is equipped with a 2.0-liter turbocharged engine, paired with a 6-speed dual-clutch transmission, with a maximum power of 155 kW, a maximum torque of 280 Nm, and a maximum power speed of 5300 to 6200 rpm.
5
2
Share

What Causes the Clicking Sound When Shaking the Steering Wheel?

The reasons for the clicking sound when shaking the steering wheel are: 1. The noise comes from the shock absorber's thrust bearing. If the clicking sound occurs when lightly shaking the steering wheel while stationary, it might be due to insufficient lubrication in the thrust bearing. Applying some grease to the thrust bearing can help; 2. The noise originates from the stabilizer bar. If the stabilizer bar bushings are loose or damaged, it can cause noise not only when turning the steering wheel but also when driving on uneven roads. Loose stabilizer bar bushings can be fixed by adding shims; 3. The noise comes from the steering column dust cover. If the noise is heard from below the steering wheel, it might be due to the steering column dust cover. Lack of lubrication in the dust cover can cause friction noise, and applying grease inside the dust cover will eliminate the noise.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.