How to Solve Transmission Slippage?

Does jacking up a car to change a tire damage the car frame?

Jacking up a car to change a tire does not damage the car frame. Generally, the frame will yield or deform only when subjected to a force of at least 2-3 times its own weight. The force exerted by a jack when lifting a car is approximately 1/4 to 1/3 of the vehicle's total weight, which is insufficient to cause frame deformation. Below are the introduction and operational precautions for jacks: Jack operation precautions: When operating a jack, avoid abrupt movements. Lift the car rhythmically and steadily, and lower it slowly. If using multiple jacks simultaneously, ensure synchronized operation. After completing the jack operation, conduct a thorough inspection to check for hydraulic pressure issues and potential hazards. Perform maintenance as needed and store the jack in an appropriate location. Jack introduction: A jack is a compact lifting device that uses a rigid lifting component as its working mechanism to elevate heavy objects within a small stroke range via a top support seat or bottom support claw. Jacks are primarily used in industries, transportation sectors, and for vehicle repairs, as well as other lifting and supporting tasks. They feature a lightweight yet sturdy structure, are flexible and reliable, and can be easily carried and operated by a single person.

3

2

Share

What is the appropriate tire pressure for front tires in winter?

Under normal circumstances, the tire pressure for front tires in winter should be 2.2-2.3 bar, while the rear tires should be 2.4-2.5 bar. In winter, it is advisable to slightly increase the standard tire pressure by about 0.2 bar. Relevant details are as follows: Generally, the lower limit of the standard tire pressure is sufficient. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can usually be about 0.1 bar lower than the standard to prevent overheating and tire blowouts. According to the international GBT2978-2008 standard, the recommended tire pressures for different tires are as follows: standard tires should be 2.4-2.5 bar; reinforced tires should be 2.8-2.9 bar; the maximum pressure should not exceed 3.5 bar. Tire pressure anomalies: Generally, an alarm will be triggered if the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary.

8

1

Share

What is the replacement interval for the Tiguan air filter?

According to the maintenance manual of the Volkswagen Tiguan, the air filter should generally be replaced every 10,000 to 20,000 kilometers or during every other maintenance service. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of throttle sludge. The location of the car's air filter element depends on the intake form and engine structure, typically found in the air cleaner on the engine intake pipe. There are two types of air filters in cars: dry and wet. Dry filters are made of paper or organic materials, while wet filters are made of metal mesh. The function of the air filter is to filter out particulate impurities from the air, ensuring that sufficient clean air enters the cylinders and preventing airborne dust from being sucked into the engine, which could accelerate wear on the piston group and cylinders. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or air element. It is mainly used in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. During operation, the engine inhales a large amount of air. If the air is not filtered, the suspended dust particles in the air can be drawn into the cylinders, accelerating wear on the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, especially in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders. Using a dirty air filter while driving can lead to insufficient engine intake, incomplete fuel combustion, resulting in unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The car air cleaner is a device that removes particulate impurities from the air, consisting of one or several air filter components. Its main function is to filter out harmful impurities from the air entering the cylinders to reduce early wear on the cylinders, pistons, piston rings, valves, and valve seats. Thus, before air enters the cylinders, it must pass through the fine filtration of the air cleaner. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light clogging, it can be cleaned by blowing compressed air from the inside out and reused. Severely dirty air filters should be replaced promptly.

16

2

Share

What are the causes of Focus EGR flow failure?

Focus EGR flow failure causes: Poor fuel quality leading to EGR flow failure: The engine has relatively high requirements for fuel quality. Poor fuel quality can cause unclean engine cylinders with deposited carbon buildup, requiring engine carbon cleaning. Sharp temperature drops causing EGR flow failure: During cold starts, especially when temperatures drop sharply, the computer's temperature correction may cause the pollution warning light to illuminate during startup. However, it will stabilize once the temperature drops to a certain level without fluctuations.

15

0

Share

What Causes Engine Oil Burning in New Cars?

New cars burning engine oil is mainly caused by unsynchronized fuel standards or engine carbon buildup. Details are as follows: Unsynchronized fuel standards: Due to the discrepancy between domestic fuel quality and international standards, a large amount of carbon deposits easily forms in the combustion chamber during engine operation. Carbon buildup is the root cause of various engine problems. Engine carbon buildup: Carbon deposits accumulate in the piston grooves, causing the piston rings to stick together. This prevents the piston rings from sealing properly, significantly reducing their oil-sealing capability. Additionally, sludge can clog the oil return holes, preventing normal oil circulation and leading to increased oil consumption.

10

2

Share

Can only one ETC be bound to a car?

A car can only be bound with one ETC, because ETC must be processed at the ETC network center. Once the ETC is processed, the vehicle information and ETC information will be bound, so the car cannot apply for another ETC, and the ETC network center will not approve the issuance of another card. Once the ETC is installed, do not remove it at will, as it will become invalid after removal. The ETC lane is unattended, with only an antenna hanging above the lane. No operation is required when passing through; just drive at a low speed, and the device will automatically communicate with the antenna. The lifting of the barrier proves that the communication has been completed.

18

2

Share

How to Solve Transmission Slippage?

Does jacking up a car to change a tire damage the car frame?

What is the appropriate tire pressure for front tires in winter?

What is the replacement interval for the Tiguan air filter?

What are the causes of Focus EGR flow failure?

What Causes Engine Oil Burning in New Cars?

Can only one ETC be bound to a car?

Is the Punch CVT transmission equipped with a steel belt or chain?

Where is the wiper switch located on a Mercedes-Benz?

What is the size of the X-Trail wiper blades?

Can You Drive with Low Oil Pressure?