How to Solve the Yellowing Inside Car Light Covers?

1 Answers
McElliot
07/29/25 7:03pm
To address the yellowing inside car light covers, the solution is to clean them with soapy water every three months. After cleaning, polish the headlights with a polishing agent and then apply wax for maintenance. Additionally, it's important to avoid parking the car in direct sunlight when not in use; try to park in shaded areas instead. The primary cause of yellowing on the surface of car headlights is prolonged exposure to sunlight, so it's essential to minimize sun exposure. Car lights are tools for road illumination during nighttime driving and also serve as signaling devices for various driving conditions, generally categorized into headlights, tail lights, and turn signals. The use and maintenance of car lights are closely related to safe driving at night or in adverse weather conditions, so their care should not be overlooked.
Was this review help?
1
2
Share
More Forum Discussions

What Causes the Toyota Electric Power Steering Warning Light to Illuminate?

The power steering warning light illuminating in yellow indicates partial failure of the steering system, requiring greater effort to turn the steering wheel; if the light turns red, it signifies complete failure of the steering system, necessitating significantly more force to turn the wheel. 1. Possible causes include: Overloading of the steering system leading to excessive wear of the stator and rotor inside the steering pump, resulting in irregular fluid movement and abnormal noises; loose installation of the steering gear or pump on the bracket; internal wear of the steering gear; and improper adjustment of gears and racks. 2. Impact of not straightening the wheels when parking: Failing to straighten the wheels when parking prevents the steering linkage from returning to its neutral position, keeping the steering wheel gears and tie-rod racks under stress. Over time, this causes aging and deformation of steering components, leading to vehicle drift. When parked correctly, the suspension bears uniform load. Not straightening the wheels creates a wheel camber, tilting the vehicle body to one side and placing greater stress on that side's suspension. Prolonged exposure to this condition accelerates the aging and wear of shock-absorbing components in the suspension system.
18
5
Share

Where to Get a Physical Examination for Driver's License Renewal in Yueqing?

Driver's license renewal physical examination locations include: Yueqing Traditional Chinese Medicine Hospital, Yueqing Second People's Hospital, Yueqing Third People's Hospital, Yueqing Fifth People's Hospital, Yueqing People's Hospital branch, and Motor Vehicle Driver Registration Center. Below is relevant information about driver's license renewal: 1. Driver's license renewal rules: Within 90 days before the expiration of the driver's license, bring your ID card, driver's license, physical condition certificate, and three passport photos to the vehicle management office at the issuing location to obtain and fill out the "Motor Vehicle Driver's License Application Form", then submit it for renewal processing. After paying a 10-yuan processing fee, you will receive your new driver's license. 2. Proxy rules: If you are unable to apply for renewal yourself due to personal reasons or being in a different location, you can mail back your ID card, driver's license, physical condition (medical examination) certificate issued by a county-level or above medical institution, and three passport photos, and entrust family or friends to handle it for you. However, you must first obtain and fill out a "Motor Vehicle Driver's License Application Form" from the local vehicle management office where you temporarily reside and mail it back, as this form requires the signature of both the applicant and the proxy to process the renewal.
20
5
Share

Does the Golf 7 Transmission Fluid Need to Be Replaced?

It needs to be replaced. The Golf 7 transmission is not maintenance-free for life, and the transmission fluid still requires replacement. 1. Function of Transmission Fluid: Transmission fluid, abbreviated as ATF (Automatic Transmission Fluid), is essentially a type of hydraulic oil present in various components of the transmission. It performs numerous critical tasks, including power transmission, lubrication, anti-wear, and cooling. Additionally, transmission fluid plays a significant role in combating corrosion, rust, and maintaining cleanliness among mechanical parts. In terms of functionality, transmission fluid is just as important as engine oil. 2. Consequences of Not Replacing Transmission Fluid: Although the transmission does not endure as much stress as the engine, this does not mean the transmission fluid never degrades. If left unmaintained for an extended period, the impurities generated from normal use will accumulate in the fluid, leading to clogged transmission systems, abnormal wear, and reduced fluid mobility in the torque converter, resulting in sluggish gear responses. 3. Degraded Fluid Itself: Degraded fluid produces large amounts of sludge and becomes corrosive, which can significantly shorten the transmission's lifespan. Therefore, vehicles that never have their transmission fluid replaced are highly likely to experience issues such as difficulty shifting gears, frequent gear jumping, harsh gear engagement, and even complete transmission failure.
6
4
Share

What is the Clutch Called for Braking?

The clutch is referred to as the brake for stopping. Below is relevant information about the clutch: 1. Clutch: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine with the transmission, thereby cutting off or transmitting the power from the engine to the transmission. 2. Principle of Releasing the Clutch: The principle of releasing the clutch is: 'Slow at first, then fast, and finally synchronized.' When initially pressing down, it should be done quickly and all the way to the bottom. When lifting the pedal during the free travel phase, it should be fast, but slow as it nears the engagement point. Upon reaching the semi-engagement point, pause briefly before fully releasing. The key to this process is accurately finding the semi-engagement point. To effectively control the vehicle speed, use the semi-engagement point as the dividing line—lifting quickly above it and pressing down slowly below it, adjusting to find a speed that suits you.
9
4
Share

Does Modifying Interior Ambient Lighting Affect the Car?

Modifying the interior ambient lighting of a vehicle does not affect the car itself. This is because while driving, the electricity comes from the generator, not the battery. The battery is only used after the engine is turned off. Therefore, as long as the lights are not used for extended periods after turning off the engine, there will be no impact. Potential hazards of installing interior ambient lighting: It may affect the driving safety of the car. The color of the lights could interfere with normal safe driving. When driving at night, if the interior lights are on, the windshield acts like a mirror, reflecting the interior light into the driver's eyes. This can make it difficult for the driver to see darker road conditions ahead, increasing the risk of traffic accidents. Interior ambient lighting is a decorative illumination, typically in colors like red, blue, or green, mainly to make the car interior more vibrant at night, enhance the atmosphere, and create a certain mood. It's important to note that the color of the lights should not interfere with normal safe driving. To turn on the interior ambient lighting: First, turn the ignition switch to the ON position, then press the ambient light button to activate the ambient lighting mode.
2
2
Share

How to Quickly Deal with Insufficient Cylinder Pressure?

Here are the quick solutions for insufficient cylinder pressure: 1. Grinding or replacing the valves: Check the car's valves. If the pressure drop is caused by poor valve sealing, the valves should be ground or replaced. If the valve spring is broken, leading to insufficient pressure, the valve spring can be replaced. 2. Replacing the cylinder head gasket: Check for air leaks between the cylinder block and cylinder head. If the pressure drop is due to leakage between them, it can be easily resolved by replacing the cylinder head gasket.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.