How to solve the yellow light issue on the Nissan Sylphy key?

1 Answers
DelEden
07/29/25 11:41pm
New Nissan Sylphy key yellow light solution is to replace the key battery. The yellow light on the Sylphy key indicates that the car computer cannot detect the car key, or the key battery is dead. If the dashboard still shows a warning after replacing the key, it is recommended to have it inspected at a 4S shop. In terms of exterior design, the new Sylphy closely follows contemporary trends. The modified front grille resembles the new-generation Teana more closely, with the enlarged grille giving the car a more imposing appearance. The waistline running from front to rear makes the new model look more dynamic. While maintaining the smooth, full, and rounded style, the exterior appears more rugged, with softer lines, and the overall design tends to be more youthful.
Was this review help?
18
1
Share
More Forum Discussions

Why does the steering wheel shake when driving fast?

Here are the reasons why the steering wheel shakes when driving fast: 1. It is a manifestation of poor wheel dynamic balance. Go to the after-sales service for a dynamic balance check. 2. Check whether the front and rear shock-absorbing support rubber blocks of the engine and transmission are normal. Go to the after-sales service for inspection and repair. Additional information: 1. Dynamic balance: If the shaking occurs at 80-120 mph and disappears above or below this range, the four-wheel dynamic balance should be checked first. Possible causes include the detachment of tire balance weights, failure to perform dynamic balance after tire repair, or inaccurate measurements by dynamic balance machines in some small roadside shops. 2. Tires and rims: The deformation of tires and rims is usually caused by careless driving habits, such as driving too fast on rough roads, climbing curbs, or passing over speed bumps at high speeds, all of which can lead to this issue.
7
3
Share

Is the Transmission the Same as the Engine?

Transmission is not the engine. The transmission is the transmission, and the engine is the engine—they are two completely different machines. Engine cylinders can be single-cylinder, 3, 4, 6, 8, 12, or 24 cylinders, etc.; transmissions are divided into manual and automatic types. The car engine is the device that provides power to the vehicle, determining its performance, fuel efficiency, stability, and environmental impact. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems, among others. The transmission mainly refers to the vehicle's gearbox, which is divided into manual and automatic types. A manual transmission primarily consists of gears and shafts, achieving speed and torque variations through different gear combinations.
2
3
Share

What Are the Effects of a Car Being Exposed to Rain Overnight?

The effects of a car being exposed to rain overnight are as follows: 1. Paint surface corrosion: In areas with severe pollution, rain is mostly acidic, exposing the car's paint to acid rain, which can corrode the paint, leading to water marks, oxidation, and even cracking. 2. Dampness and mold: Compared to sunny days, the interior of the car is more prone to dampness and mold after rain. Additionally, rainwater can seep into the car's body seams, causing metal parts to rust and corrode. Therefore, accumulated moisture should be removed as soon as possible after the rain stops to prevent mold growth. 3. Bacterial growth: The more humid the environment, the faster bacteria multiply, especially during the rainy season. Areas that are usually dry can be ventilated to maintain air circulation, but during the rainy season, avoid opening windows to prevent rapid bacterial growth inside the car. 4. Headlight water ingress: Water entering the headlights can affect their brightness, and excessive water may damage the headlights and alter the direction of light refraction, posing a safety hazard while driving.
3
5
Share

How to Connect Bluetooth in a Mercedes-Benz Car?

Mercedes-Benz Bluetooth connection method: 1. Turn on both the mobile phone Bluetooth and the car's Bluetooth, and make them discoverable; 2. On the mobile phone's Bluetooth interface, click 'Search for Devices'; 3. At this time, a pairing code will appear on the car's system. Enter this pairing code on your phone to pair; 4. If the pairing code is entered correctly, the Bluetooth will connect. Generally, after connection, the phone's battery level, signal, and other information will be displayed in the upper right corner of the screen. Mercedes-Benz Bluetooth precautions: 1. Do not use it under strong light for too long; 2. Do not clean the device with corrosive liquids; 3. Do not store it in excessively hot places, as high temperatures will shorten the lifespan of electronic devices, damage the battery, and cause some plastics to deteriorate.
9
0
Share

How to turn on the low beam headlights on the Honda City?

Method to turn on the low beam headlights on the Honda City: The high/low beam switch is controlled by the turn signal lever. Moving the lever left or right activates the turn signals, while moving it up or down switches between high and low beams. Pushing the lever down turns on the high beams, pulling it up turns on the low beams, and lifting it up again switches back to high beams, then releasing returns to low beams. The Honda City is positioned as a compact car, with dimensions of 4450 mm in length, 1695 mm in width, and 1477 mm in height, and a wheelbase of 2600 mm. In terms of exterior design, the front fascia of this car closely resembles the new Honda Fit, with very pronounced lines on the front fenders. The body features a dual waistline design, and the rear styling somewhat resembles the current Honda Crider.
7
4
Share

Will a vehicle that has not undergone annual inspection result in a 12-point deduction?

Vehicle that has not undergone annual inspection will not result in a 12-point deduction. According to the Road Traffic Safety Law, the penalties for failing to conduct annual inspection are as follows: 1. If the delay does not exceed 3 months, the annual inspection procedures can be processed normally, and the traffic police will issue an oral warning; 2. If the delay exceeds 3 months but is less than 2 years, a fine will be imposed along with a 3-point deduction, and in severe cases, the motor vehicle may be temporarily impounded; 3. If the delay exceeds 2 years, the vehicle management office will cancel the vehicle's registration file, at which point the vehicle cannot undergo annual inspection and corresponding fines must be paid to restore it; 4. If the delay exceeds 3 inspection cycles, the vehicle management office will forcibly scrap the vehicle, even if the vehicle has not reached the mandatory scrapping age.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.