How to Solve the Water Sound Inside the Volkswagen Sagitar?

3 Answers
VanMargaret
07/25/25 12:06pm
Solutions for water sound inside the Volkswagen Sagitar: 1. Check if the water tank is leaking; 2. Inspect whether the drainage holes are blocked; 3. Drain the accumulated water inside the doors. The Volkswagen Sagitar is a compact car under FAW-Volkswagen, with body dimensions of: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, fuel tank capacity 50L, and body structure as a 4-door 5-seater sedan. The Volkswagen Sagitar is equipped with a 1.2T turbocharged engine, paired with a 5-speed manual transmission, delivering a maximum horsepower of 116hp, maximum power of 85kW, and maximum power speed of 5000rpm.
Was this review help?
11
5
Share
LeJoanna
08/11/25 8:13pm
Recently, my Sagitar kept making water flow noises, and there was a gurgling sound under the front passenger floor when the AC was on. It's usually due to a clogged drain hole. Since the AC operation produces condensate that needs to drain out, the small opening can easily get blocked by mud, dust, or leaves. You can try fixing it yourself: use a wire or compressed air to blow through the drain pipe opening, which is located under the front passenger dashboard. For water sounds in the door, clean the drain holes at the bottom seal strip and unclog the plug to drain accumulated water. If cleaning doesn’t help or you notice a burnt smell, be cautious—it might indicate a leaking heater core or wiring issue, which can corrode the frame and cause rust. Once, I delayed fixing it, leading to moldy carpets and higher repair costs. If DIY methods fail, I suggest visiting a 4S shop for a minor fix to avoid bigger issues. Park away from leafy areas to reduce the risk, and make it a habit to check the drainage system after using the AC.
Was this review help?
4
2
Share
Expand All
BlakelyMarie
08/11/25 8:14pm
As an experienced professional frequently dealing with such issues, the water sound in Volkswagen vehicles is mostly caused by evaporator drain problems. When the AC is on, condensed moisture normally drains outside through pipes, but clogged holes lead to water accumulation in the underbody compartment, creating noise. Check the AC drain tube near the firewall and use tools to clear blockages. Door water accumulation is also common—simply clean the bottom drain holes. However, persistent water flow sounds may indicate a leaking heater core, requiring internal pipe inspection to prevent corrosion or electrical shorts. A professional technician can accurately locate the issue with a multimeter at a reasonable cost. Don’t ignore safety risks—increased water accumulation may seep into electronics, causing short circuits and parking hazards. We recommend visiting an authorized repair shop for a one-stop diagnosis, ensuring both peace of mind and safety.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

Can Temporary License Plates Be Discarded Directly After Vehicle Registration?

After vehicle registration, temporary license plates can be discarded directly, but they should be destroyed before disposal. The differences between the official license plates and temporary license plates for new vehicles are as follows: 1. Validity Period: Official license plates have a long-term validity, essentially lasting the lifetime of the vehicle, while temporary license plates are valid for 5 to 15 days, with a maximum validity not exceeding 30 days. 2. Installation Method and Position: Official license plates are installed using anti-theft fasteners at designated positions on the front and rear of the vehicle, whereas temporary license plates must be affixed to the inside of the front and rear windshields as per regulations. 3. Material: Official license plates are made of aluminum alloy, while temporary license plates are made of paper.
6
3
Share

Is Black Soot at the Exhaust Port a Sign of Burning Engine Oil?

Black soot at the exhaust port is not necessarily a sign of burning engine oil. Below is an introduction to engine oil: 1. Introduction: Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. 2. Function: The main functions of engine oil are to reduce friction and wear on moving parts and to remove sludge and varnish from the engine. It also neutralizes acids produced from fuel and lubricant oxidation, improves the sealing of piston rings, and cools the engine by carrying away heat from moving parts. 3. Composition: Almost all lubricating oils contain corrosion (rust) and oxidation inhibitors. Engine oil can consist solely of lubricant base oil without including detergent oil components.
7
0
Share

Why does the car smell like gasoline when the air conditioner is on?

Because the carbon canister solenoid valve cannot open normally, gasoline vapor cannot enter the engine for combustion. When the carbon canister absorbs too much gasoline vapor, it will be released into the atmosphere for safety. Here are the relevant explanations: 1. Working principle: Its working principle is to use activated carbon in the carbon canister to absorb gasoline vapor from the fuel tank and send it to the engine for combustion at the appropriate time, avoiding direct emission into the atmosphere and polluting the air. 2. Overfilled gasoline tank: The fuel tank is filled with too much gasoline. The carbon canister is connected to the top of the fuel tank through a vent pipe, and normally the pipe contains gasoline vapor.
14
3
Share

Is the A3 driver's license difficult to obtain?

With some driving experience, obtaining an A3 driver's license is not particularly difficult. Here is more information about driver's licenses: 1. Introduction: A driver's license (full name: motor vehicle driver's license), also known as a "driving license," is a document issued by government transportation departments to individuals who qualify to drive, usually in the form of a card. 2. Requirements: To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. The license typically specifies the types of motor vehicles the holder is permitted to drive. 3. Legal basis: "Regulations on the Application and Use of Motor Vehicle Driver's Licenses." 4. Test subjects: The examination includes four components: traffic laws and related knowledge, field driving, road driving (including safe and civilized driving), etc.
14
3
Share

Are there any requirements for downhill slope positioning?

There are requirements for downhill slope positioning. Below are relevant introductions about hill starts: 1. Concept: Hill start is a field test in the second subject of the driver's license examination, which involves starting a vehicle parked on a steep slope upwards. After positioning is achieved, firmly pull up the handbrake, then pull it two more times to ensure the handbrake is tightly secured. 2. Technique: Shift to first gear, release the handbrake, gently release the clutch. After the vehicle stabilizes, proceed uphill, staying as close as possible within 30 centimeters of the sideline. Try to control the clutch to keep the vehicle speed as slow as possible. For positioning parking, use reference objects aligned with the marker pole to ensure the front of the vehicle is aligned with the pole, thus achieving proper positioning.
15
3
Share

What does e-cvt mean?

e-cvt refers to an automotive transmission. Below is an introduction to transmissions: 1. Overview: A transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine, and can fix or change the gear ratio between the output and input shafts. 2. Functions: A transmission consists of a gear shifting mechanism and a control mechanism, with some vehicles also including a power take-off mechanism. It can be categorized into stepped, continuously variable, and integrated transmissions, featuring functions such as enabling reverse driving, interrupting power transmission, and changing gear ratios. 3. Principle: A manual transmission primarily comprises gears and shafts, achieving speed and torque variation through different gear combinations; whereas an automatic transmission (AT) consists of a torque converter, planetary gears, and a hydraulic control system, achieving speed and torque variation via hydraulic transmission and gear combinations.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.