How to Solve the Tripping Issue When Charging a New Energy Vehicle?

1 Answers
BradleyRose
07/29/25 7:07pm
New energy vehicle charging tripping can be resolved by changing the charging location or seeking repair at a 4S shop. Below are the specific causes and solutions: 1. Leakage tripping: Tripping may be caused by leakage, overcurrent, or switch failure. If tripping does not recur after changing the charging location, then the issue lies with the home charging station. Solution: Change the charging location. 2. Vehicle battery issue: If tripping persists after changing the charging station, it indicates a fault in the new energy vehicle's battery or BMS communication. Solution: Professional repair at a 4S shop is required. If charging faults are detected in an electric vehicle, prompt action is necessary to avoid significant impacts on the vehicle's safety.
Was this review help?
12
2
Share
More Forum Discussions

How to activate the lock beep for BYD S6?

To activate the lock beep for BYD S6, simultaneously press the unlock and lock buttons on the remote key for 3 seconds. Below is relevant information about the BYD S6: 1. Introduction: The BYD S6 is BYD's first SUV, positioned as a mid-to-high-end domestic SUV, launched in September 2010. Its dimensions are 4810/1855/1680mm (length/width/height) with a wheelbase of 2720mm, ranking top among SUVs in its class. A minimum ground clearance of 190mm ensures excellent off-road capability. 2. Powertrain: The S6 offers three engine options: 1.5T, 2.0L, and 2.4L, available in four trims: Manual Luxury, Manual Premium, Automatic Premium, and Automatic Flagship. These are powered by either the BYD483QB or Mitsubishi 4G69 engine. The BYD483QB is BYD's self-developed engine, featuring Bosch's electronic fuel injection management system and BIVT variable intake system. The BYD S6 boasts a stylish and dynamic exterior design with sharp lines, showcasing the bold character of an urban SUV.
3
1
Share

Will a Novice Driver Get Points Deducted for the First Traffic Violation?

Points will be deducted. From the date of obtaining the driver's license, any traffic violation can result in points deduction based on the severity of the violation. The same applies during the probationary period. If 12 points are deducted during the probationary period, the license will be revoked. Below is relevant information: Handling: Points deduction on a driver's license is a penalty for traffic violations. Depending on the severity of the violation, points can range from a minimum of 1 to a maximum of 12 per offense. The points accumulation cycle is one inspection period. If a driver accumulates 12 points in one cycle, they lose their driving privileges. Typically, they must undergo no less than 7 days of traffic safety education and pass an exam before their driving privileges can be restored. License Suspension: Driving under the influence of alcohol, allowing someone without a valid driver's license or whose license has been revoked or suspended to drive, driving 50% over the speed limit, driving a modified or scrapped vehicle, causing a major traffic accident that constitutes a crime, or accumulating 12 points in one points cycle.
12
3
Share

Where is the Cruze reversing radar module located?

The Cruze reversing radar module is located at the center console screen position, and the reversing radar will activate when the reverse gear is engaged. Method for installing a reversing radar on a Chevrolet Cruze: 1. Install four radars at the rear of the car. First, use measuring tools to mark the installation positions of the probes. 2. Prepare an electric drill, install the provided specialized drill bit, and drill holes at the marked positions. 3. Connect the probes to the wiring harness and install them in the corresponding drilled holes. Then, organize the wiring harness of the probes and route it to the trunk. 4. Install the front two probes, then install the rear probes using the same method. 5. Route the wiring harness of the front probes to the brake position of the driver's seat and connect it to the trunk through the door gap. Next, connect the red wire to the reversing wire and the white wire to the brake wire. 6. Connect the display, probe wiring, etc., to the main unit. Secure and hide the main unit inside with adhesive tape, then fix the display screen to complete the installation.
14
3
Share

Where to Apply for a Motorcycle License in Baoding?

To obtain a motorcycle license in Baoding, you can apply at the vehicle management office of the local traffic management department under the public security authority, either at your place of residence or temporary residence. Below is relevant information about the motorcycle license application: 1. Required materials: Generally, you can apply for a motorcycle license at a driving school approved by the traffic police department. You will need to pay a certain application fee and prepare 8 white-background photos and a 10-yuan medical examination fee. For non-local residents, a local residence permit is also required. If you are upgrading your license, you must provide the original driver's license. The fees and examination process for first-time applicants and those upgrading their license are the same. After registration, a medical examination is required, which mainly includes tests for color blindness, physical disabilities, and vision. 2. Examination content: The test consists of four parts: Subjects 1, 2, 3, and 4. Subjects 1 and 4 are theoretical tests, assessing general knowledge and emergency response capabilities. Subjects 2 and 3 are practical road tests. Subject 2 involves navigating around poles—four poles are placed in a straight line, and you must weave through them in an S-shape and then weave back, without your feet touching the ground, the engine stalling, or the vehicle crossing the line. Subject 4 requires driving as instructed by the examiner.
1
0
Share

What is the maximum allowed speed of the Tiggo 8?

The maximum allowed speed of the Tiggo 8 is 190 km/h. The maximum speed refers to the highest driving speed that a car can achieve on a well-paved road, which is the speed when the driving resistance and driving force are balanced under windless conditions on a flat road surface. It is one of the evaluation indicators of a car's dynamic performance. The Tiggo 8 is a mid-size SUV under the Chery brand. This vehicle has a wheelbase of 2710 mm, with a length, width, and height of 4700 mm, 1860 mm, and 1746 mm respectively. The Tiggo 8 is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 1.6-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 230 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1750 to 4000 rpm. The 1.6-liter turbocharged engine produces 197 horsepower and a maximum torque of 290 Nm. This engine achieves its maximum power at 5500 rpm and outputs its maximum torque between 2000 to 4000 rpm.
2
2
Share

Can a hole in the bumper be patched?

A hole in the bumper can be repaired, but it is not recommended because the bumper is a high-pressure point for wind resistance. If the craftsmanship or materials are slightly inferior, it is prone to damage again. Therefore, replacement is recommended. The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear of the vehicle body. Here is an introduction to car bumpers: 1. Bumper material: The front and rear bumpers of a car are made of plastic, known as plastic bumpers. They are generally made of polyolefin and polypropylene materials, formed by injection molding. 2. Bumper composition: The plastic bumper of a car consists of three parts: the outer panel, buffer material, and crossbeam. The outer panel and buffer material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin sheets into a U-shaped groove; the outer panel and buffer material are attached to the crossbeam. 3. Other functions of the bumper: Plastic bumpers have strength, rigidity, and decorative properties. From a safety perspective, they can act as a buffer during collisions, protecting the front and rear of the car body. From an aesthetic standpoint, they can naturally integrate with the car body, forming a seamless whole, and serve as an important decorative component of the car's exterior.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.