How to Solve the Transmission Noise Issue in Volkswagen Sagitar?

1 Answers
HarrisonLynn
07/29/25 4:08pm
Transmission noise is an issue that most car owners cannot resolve on their own, and it is best to send the vehicle to a professional repair shop for inspection. Below is relevant information: 1. The transmission is a crucial component of a vehicle, as it can change the gear ratio and expand the torque and speed of the drive wheels. With advancements in modern technology, transmissions have also evolved—from the original manual transmissions to today's continuously variable transmissions (CVT), and from non-synchronized to synchronized transmissions, making operation increasingly convenient. Currently, diesel engines are widely used in construction machinery, but their torque and speed variation range is limited, making it unable to meet the requirements for traction and driving speed under various working conditions. A transmission is needed to resolve this contradiction. 2. The performance of a transmission is a key factor in measuring the power, fuel efficiency, and drivability of construction machinery. Current transmission systems mainly include: mechanical transmission, hydraulic transmission, and hydrostatic transmission. Transmissions can be categorized into manual shifting and power shifting, with structures including fixed-axis and planetary types.
Was this review help?
15
0
Share
More Forum Discussions

What Are the Scrapping Standards for Flood-Damaged Vehicles?

When a vehicle cannot meet the national safety technical standards for in-use vehicles even after repair and adjustment, it must be scrapped. The following is relevant information about flood-damaged vehicles: 1. Introduction: A flood-damaged vehicle refers to one that has been submerged in water, typically involving the engine and transmission being soaked, with the water level exceeding the wheels and body seats, and the vehicle's underbody components being in prolonged contact with water. 2. Hazards of Flood-Damaged Vehicles: The dangers of water-damaged vehicles are significant. If a vehicle is submerged, it can easily lead to rusting of body components, shortening its service life and reducing safety performance. For example, water damage can cause corrosion and rusting of the vehicle's wiring, leading to sudden stalling or spontaneous combustion due to short circuits while driving, with potentially unimaginable consequences.
5
4
Share

What are the reasons for a Honda CR-V suddenly failing to start?

Here are the specific reasons why a Honda CR-V suddenly fails to start: 1. Carbon buildup in the engine: If there is slight shaking during idling, cleaning the throttle body and fuel injectors can resolve the issue. 2. Weak spark plug ignition energy: If spark plugs are not replaced after the maintenance cycle, their ignition energy decreases significantly, leading to misfires. 3. Insufficient fuel pressure in the low-pressure fuel system: Low fuel pressure in the low-pressure fuel system directly causes the engine to require a second ignition. Specifically, check the fuel pressure regulator, fuel pump, fuel filter, and internal fuel lines. 4. Battery depletion: Jump-starting the vehicle with another car or battery is necessary.
10
0
Share

What is the Chinese name for Insplre?

Insplre is a car model from Dongfeng Honda. The English word 'Insplre' corresponds to meanings such as 'inspire', 'encourage', and 'give inspiration' in Chinese. Currently, this Honda car model does not have a Chinese name. Insplre is highly popular among young people. 1. Exterior Design: The front face of the INSPIRE features a family-style design, with a single chrome trim strip running across the front and connecting with the headlights. The interior of the headlight assembly is smoked and equipped with multi-point LED light sources, giving it a highly technological feel. 2. Powertrain: The Dongfeng Honda INSPIRE is equipped with a 1.5T turbocharged engine, paired with a CVT continuously variable transmission, delivering a maximum output power of 194 horsepower. In terms of dimensions, the Dongfeng Honda INSPIRE measures 4910*1862*1450mm, with a wheelbase of 2830mm.
11
2
Share

What are the items for braking in Subject 3?

The items for braking in Subject 3 are as follows: 1. Going straight through an intersection: When you hear the instruction "Go straight ahead at the intersection," if there are traffic lights, drive according to the traffic light requirements. However, if there are no traffic lights, you must tap the brake in advance to slow down and shift to a lower gear when passing through the intersection, fully observe and confirm safety before proceeding. 2. Left/right turn at an intersection: Before turning left or right, you must slow down to 2nd gear in advance, and also apply the brake during the turn to prevent the speed from being too high. Excessive speed during a turn can easily cause the vehicle to overturn, which is very dangerous. 3. Passing through a crosswalk: When you see a crosswalk ahead, whether there are pedestrians or not, you must tap the brake in advance to reduce speed before passing. If there are pedestrians on the crosswalk, you must stop and yield when necessary, waiting for the pedestrians to pass before continuing to drive.
4
0
Share

Will driving at 150 km/h occasionally on the highway be captured by speed cameras?

Highways are generally not under full surveillance, and there are not so many cameras installed. However, there is usually a speed monitoring camera every 10 kilometers or so. As long as you slow down when approaching these speed monitoring points, there should be no problem. However, it is best to comply with the speed limits and avoid speeding. Additional information: Penalties: 1. Each instance of speeding is penalized individually. On highways or national roads, speeding less than 10% above the limit results in a warning. 2. Speeding between 10% and 20% will incur a 3-point deduction and a fine. 3. Speeding between 20% and 50% will lead to a 6-point deduction and a fine. 4. Speeding more than 50% above the limit will result in an immediate 12-point deduction, a fine, and the fine amount will double progressively with the increase in speed until it reaches the maximum cap for speeding over 100%.
1
2
Share

Should the clutch be pressed when performing intermittent braking in Subject 3?

Intermittent braking does not require pressing the clutch. Intermittent braking refers to lightly pressing the brake and then releasing it, repeating this action to gradually reduce the vehicle speed. During this process, there is no need to press the clutch, but it is important to note that the force applied to the brake should be gentle and not too strong to avoid stalling the engine. Below is relevant information: 1. Subject 3: Subject 3 is part of the motor vehicle driver's license assessment, commonly referred to as the road driving skills and safe civilized driving knowledge test. 2. Test content: The road driving skills test generally includes preparation before driving, simulated lighting test, starting, driving in a straight line, gear shifting operations, lane changing, pulling over, going straight through intersections, turning at intersections, meeting other vehicles, overtaking, making U-turns, and night driving. The test content varies depending on the type of vehicle being licensed. The safe civilized driving knowledge test generally includes requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, and handling knowledge after traffic accidents occur.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.