How to Solve the Sunroof Rattle Issue in the 7th Generation Camry?

2 Answers
JanelleLee
07/24/25 4:31am
The solutions for the sunroof rattle issue in the 7th Generation Camry: 1. Replace aged components; 2. Clean dust from the sliding rails. Press the sunroof switch button of the Toyota Camry, maintain a quiet environment both inside and outside the vehicle, and observe the sunroof's movement path to check for any noticeable up-and-down fluctuations. If such fluctuations are present, it likely indicates component aging, and the only solution is to replace the affected parts. The Camry is a model under GAC Toyota. The 7th Generation Camry was developed with the concept of a new-era sedan, featuring a multifunctional 6-speed automatic transmission, an ACIS intelligent harmonic supercharging intake system, among other configurations. The vehicle's transmission includes an S sport mode, which provides denser gear ratios, offering owners more precise and refined gear selection options for smoother shifting.
Was this review help?
12
2
Share
ColeFitz
08/11/25 12:07am
I encountered the sunroof rattling issue with my seventh-generation Camry. It made annoying creaking noises when driving over bumps. At first, I thought it was a minor problem, but later found out it's mostly caused by dust accumulation or debris stuck in the tracks. First, you need to clean out small stones, leaves, and other debris from the tracks using a soft brush—don't apply too much force. Lubrication is key—use a silicone-based lubricant to spray the tracks and seals, avoiding oil-based ones as they attract dust. If the noise persists after lubrication, the tracks might be deformed or parts loosened, so check the screw fastenings. After my simple fix, the noise reduced by half, but a proper adjustment at the repair shop later completely resolved it. Regular maintenance is crucial—clean and lubricate every six months to prevent this issue.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

How many drainage holes does the sunroof of the BMW 3 Series have?

The sunroof of the BMW 3 Series has four drainage holes. Pay attention to the waterproofing of the sunroof: The sealing of the sunroof is done with rubber seals. During use, it is important to keep the seals free of dust, especially in winter or after long-distance travel. Regularly clean them with a duster. Additionally, never attempt to open the sunroof when it is frozen, as this can damage the sunroof motor. In seasons with heavy sand or dust, clean the seals with a sponge every two months. Operating the electric sunroof: Avoid fully opening the sunroof on bumpy roads, as excessive vibration between the sunroof and the sliding rails can cause deformation of related components or even damage the motor. During car washing: Avoid directing high-pressure water jets directly at the seals. This can not only deform the seals under pressure, leading to water leakage into the car, but also significantly damage the seals.
16
2
Share

What brand is the manual transmission of the Emgrand GL?

The manual transmission used in the Emgrand GL is the Aisin 6MT. Features of the Emgrand GL transmission: The Emgrand GL's manual transmission is an Aisin product, featuring a simple structure, mature technology, reliable performance, and high transmission efficiency, which makes it relatively more fuel-efficient. It is purely mechanically controlled, with quick shift response. The gear ratios of the first and second gears are closer to the third gear, which means the reduction in gear ratios across the first three gears is gradual, with smaller gaps between them. This results in a smaller drop in RPM after upshifting, less reduction in RPM, and less power loss, making it more suitable for smooth power delivery after upshifting. Introduction to the Emgrand GL transmission brand company: Aisin of Japan is a company specializing in the production of automatic transmissions. It was established as a joint venture between Aisin and BorgWarner and is a subsidiary of Aisin Seiki Co., Ltd., with strong technical foundations and R&D capabilities.
11
2
Share

What engine does the GAC Trumpchi M8 use?

GAC Trumpchi M8 engine introduction is as follows: The Trumpchi M8 uses GAC Group's latest third-generation 390T (2.0T turbocharged) engine. Configuration aspects: The Trumpchi M8 is equipped with GAC ADiGO L2 autonomous driving assistance system, featuring functions such as fully automatic parking (FAPA), intelligent speed limit cruise (IACC), rear cross-traffic braking (RCTB), and comes with four-screen interconnection and four-zone voice control system, leading ahead of joint-venture competitors. Power aspects: The Trumpchi M8 is powered by GAC's self-developed 2.0T engine with maximum power of 185kW and peak torque of 390N·m, paired with Aisin's 8AT transmission. This powertrain combination delivers strong performance while maintaining mature stability, making it perfect for the vast majority of users.
8
1
Share

What brand is the zxdz_01 car navigation system?

This is the Shandong Weili brand. Below is relevant information about car navigation systems: 1. Concept: A car navigation system is a driving assistance device that can help users accurately locate their current position, calculate the route based on a set destination, and guide users to their destination through both map display and voice prompts. 2. Operating Principle: GPS consists of three main parts: space satellites, ground monitoring, and user receivers. In space, 24 satellites form a distribution network, distributed across 6 quasi-synchronous orbits around the Earth, each orbit 20,000 kilometers above the ground with an inclination angle of 55°, with 4 satellites in each orbit. GPS satellites orbit the Earth every 12 hours, enabling any location on Earth to simultaneously receive signals from 7 to 9 satellites.
9
4
Share

What are the major systems of a car?

An automobile consists of five major systems: 1. Fuel supply system: According to the requirements of the engine, it prepares a certain quantity and concentration of the air-fuel mixture to be supplied into the cylinder and expels the exhaust gases from the cylinder into the atmosphere after combustion; 2. Lubrication system: It delivers a specified amount of clean lubricating oil to the surfaces of relatively moving parts to achieve liquid friction, reduce frictional resistance, minimize wear on components, and clean and cool the surfaces of the parts; 3. Cooling system: It dissipates part of the heat absorbed by the heated components in a timely manner; 4. Ignition system: The combustible mixture in the cylinder is ignited by an electric spark. A spark plug is installed on the cylinder head of a gasoline engine, with its head extending into the combustion chamber, capable of generating an electric spark between the electrodes of the spark plug at the right time; 5. Starting system: The process from the crankshaft beginning to rotate under external force to the engine starting to idle automatically is called engine starting. The device required to complete the starting process is called the engine starting system.
12
3
Share

Is it biennial inspection after 6-year exemption?

Small passenger vehicles aged between 6 to 10 years require biennial inspections. At the 6th and 8th year, vehicles must undergo on-site testing. For private cars over 10 years old, the original inspection cycle remains unchanged: annual inspections for vehicles aged 10-15 years, and semi-annual inspections for those over 15 years. Notes for vehicle annual inspection: Clear traffic violations in advance: Ensure all violations are settled before inspection, otherwise it will delay the process. Unresolved violations may not only prevent completion of annual inspection but also require additional time to queue at traffic police stations. It's recommended to check for any outstanding violations beforehand. Prepare required documents: Necessary materials include the vehicle's driving license and valid compulsory traffic insurance policy. Check lights and brakes: To improve inspection pass rate, conduct self-checks on lighting (verify all headlights/brake lights function properly, check for lens aging) and braking systems (ensure normal operation without wheel bias) prior to official testing. Address any abnormalities through repairs to avoid delays.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.