···
Log in / Register

How to Solve the Sunroof Leakage Issue in the Tayron?

4 Answers
AngelinaAnn
09/08/25 3:20am

Find a relatively rigid plastic strip and insert it into the drainage hole. Move it up and down a few times, which should basically unclog the drainage pipe. Using a tire repair air gun to blow air into the drainage hole can often clear the drainage pipe. After blowing, pour water onto the sunroof to check if water flows out from the drainage outlet under the car.

Was this review help?
5
1
Share
LaAyla
09/20/25 2:08am

My car once had a sunroof leak, and the interior got soaked during that rainstorm—it was such a headache. The first thing I did was check if the drainage holes were clogged, using a thin wire to clear out any mud or debris to ensure rainwater could flow out properly. Next, I inspected the sunroof seal for cracks or deformation—if damaged, it would need replacement. Additionally, accumulated dust in the sunroof tracks can prevent a tight seal, so I cleaned and lubricated the tracks thoroughly. After the repairs, I made sure to test it during rainy weather to confirm no leaks remained. It’s best to have a mechanic inspect the drainage system during annual maintenance. If you can’t fix it yourself, don’t hesitate—take it to a professional repair shop immediately, as severe leaks can damage the interior or even electrical components, compromising driving safety. Prevention is key—don’t wait until it’s too late to act.

Was this review help?
7
5
Share
Expand All
ManuelFitz
11/03/25 2:29am

As someone who often tinkers with cars, I recommend trying a DIY approach first. Use a soft hose or wire to clear the drainage holes at the four corners of the sunroof, as they're prone to clogging from leaves or mud. Also, check if the sealing rubber strip has aged or cracked, replacing it if necessary. For dust buildup on the tracks, simply use compressed air to blow it away. After these basic checks, test for leaks again. If leaks persist, consider loose or broken drainage pipe connections. Remember to wear gloves for safety and prepare tools like soft cloths, small brushes, and a water sprayer for testing. For prevention, clean the sunroof area quarterly to avoid future issues. If you can't manage it, don't hesitate to visit a professional shop—small fixes are affordable and ensure safety.

Was this review help?
2
3
Share
Expand All
McIker
12/17/25 2:29am

If you encounter a sunroof leak, stop immediately to check if the drainage holes are clogged—this is the most common issue and can often be fixed by poking them with a wire. Next, inspect whether the sealing strip has loosened and replace it if necessary. Then, clean the dust from the tracks to ensure a tight seal. If the leak is severe, don’t delay—take it to a professional repair shop where they can use a high-pressure water gun to thoroughly clear the drainage pipes and address the root cause. Ignoring leaks can lead to electrical damage or flooded interiors, resulting in higher repair costs, so prioritize safety. To minimize natural wear and tear, cover the sunroof with a car cover or tarp when parked—this saves money and hassle in the long run.

Was this review help?
18
2
Share
Expand All
More Forum Discussions

What is the problem when the Mercedes-Benz C200 transmission does not shift up?

Transmission failure is often caused by a dirty valve body. A dirty transmission valve body can degrade the quality and friction characteristics of the transmission fluid, increasing friction and wear. Additionally, sludge can form inside the transmission, leading to blockages in the valve body and pipelines, which disrupts the proper regulation of oil pressure and results in transmission issues. You can search for "non-dismantling solutions for transmission faults" to find a method that causes no damage to the car and can extend the transmission fluid change interval by 3-5 times, effectively controlling the temperature of the transmission fluid.
8
3
Share

Can a Mattress Be Placed on the Roof of a Sedan?

No, a mattress cannot be placed on the roof. The details are as follows: 1. Relevant regulations: Article 54 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: The load of a motor vehicle shall not exceed the approved load capacity specified in the vehicle's driving license, and the length and width of the load shall not exceed the dimensions of the vehicle body. Additionally, the following provisions must be observed: Passenger vehicles, except for external roof racks and built-in luggage compartments, shall not carry cargo. 2. Cargo standards: For cargo carried on the roof rack of a passenger vehicle, the height from the roof shall not exceed 0.5 meters, and the height from the ground shall not exceed 4 meters. According to these regulations, as long as the cargo meets the specified standards, it is not considered a violation.
16
2
Share

What Causes the Smell of Gasoline When Starting the Car?

When starting the car, a strong smell of gasoline is caused by incomplete combustion of the fuel. Introduction to Gasoline: Gasoline is a volatile and flammable hydrocarbon mixture liquid, distilled and cracked from petroleum, used as fuel. Precautions for Using Gasoline: Gasoline is somewhat toxic; do not siphon gasoline by mouth, and try to avoid inhaling its fumes. Pay attention to the quality changes of gasoline during long-term storage, especially to prevent it from aging. In high-temperature summer regions, cars may experience vapor lock; it is necessary to enhance engine cooling and ventilation, and, if needed, take measures like insulating the fuel pump and fuel inlet pipe or dripping water to lower their temperature.
4
3
Share

What grade of gasoline should the CFMoto 250NK use?

Based on its engine tuning and compression ratio, this motorcycle should use 95-octane gasoline. The main difference between gasoline grades lies in their anti-knock performance. If a high-compression-ratio engine uses low-octane gasoline, the most immediate effect would be noticeably increased vibration. Additionally, the engine's actual performance would be compromised—acceleration capabilities wouldn't reach standard values, speed increase performance would significantly decline, and the engine's combustion state would alter, affecting fuel consumption. It's strongly advised against using 92-octane gasoline as it would severely impact the engine's performance. Given its compression ratio indicates it's not designed for lower-grade fuel, practical operation with such gasoline should be avoided.
4
5
Share

What is the shelf life of wire drawing oil?

Wire drawing oil generally has a shelf life of 5,000 kilometers. Higher quality wire drawing oil can last longer, reaching 8,000 to 10,000 kilometers. Introduction to wire drawing lubricants: These are lubricants used during metal wire drawing, typically divided into two types: dry wire drawing lubricants (commonly known as drawing powder) and wet wire drawing lubricants (water tank wire drawing lubricants). They serve as process lubrication materials in metal wire drawing operations. Performance characteristics of wire drawing lubricants: They can firmly adhere to the wire surface and enter the drawing die with the wire, effectively separating the two interfaces in the deformation zone; resistant to high pressure and temperature, maintaining continuity and lubricity without being destroyed, charred, clumped, or deteriorated under the high pressure and temperature rise conditions during drawing, demonstrating both physical and chemical stability.
12
4
Share

What Causes the Damage to Volkswagen's Water Pump?

Automobile water pump damage can be attributed to the following reasons: 1. Unstable idling: Water pump malfunction can increase the rotational resistance of the pump. Since the water pump is connected to the timing belt, increased rotational resistance can directly affect the engine's operation. During idling, this manifests as fluctuations in RPM after starting, which is more noticeable in winter and may even lead to stalling. 2. Engine usage issues: Abnormal noises from the engine water pump, which are friction sounds during rotation. These sounds can intensify with increased engine speed and vary in volume. Typically, such noises become more pronounced as the fault worsens. Experienced mechanics should be able to identify this issue. 3. Cooling system malfunctions: This encompasses a series of fault phenomena, such as insufficient coolant, scale buildup in the coolant, or a thermostat failing to open, all of which can lead to water pump failure and damage.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.