How to Solve the Problem of Uncomfortable Audi Seats?

2 Answers
StEzra
07/29/25 2:32pm
Audi seats uncomfortable solutions: 1. Adjust to a suitable position; 2. Replace the seats. Taking the 2021 Audi A5 as an example, it belongs to the mid-size car category, with body dimensions of length 4757mm, width 1843mm, height 1358mm, a wheelbase of 2826mm, a fuel tank capacity of 54l, a luggage compartment volume of 480l, and a curb weight of 1640kg. The 2021 Audi A5 is equipped with five-link independent suspension both in the front and rear, powered by a 2.0t turbocharged engine, delivering a maximum horsepower of 204ps, a maximum power of 150kw, a maximum torque of 320nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
9
2
Share
MiaDella
08/13/25 6:53am
I've been commuting in my Audi A4 in the city for years. At first, the seats were uncomfortably hard, but after repeated adjustments, I've summarized several practical methods: First, thoroughly adjust the seat position, including seat height, backrest angle, and lumbar support—position the lumbar support right in the middle to support the lower back. Adjust the fore-aft position so that your knees are slightly bent. Then, align the steering wheel height to ensure your arms are relaxed. Secondly, I added a memory foam seat cushion, choosing a model-specific one for better fit, which made sitting much softer. While driving, avoid sitting rigidly; shift your position every half hour or pull over to stretch your back and legs. Seat discomfort may be related to the car model—base models often have harder materials, so consider upgrading to a sport version with ventilation features. Regularly clean the seats to prevent debris from affecting comfort. If all else fails, consult a professional shop for custom modifications. In short, adjustments and auxiliary tools are key.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

What is the normal intake pressure for Peugeot 307?

The normal intake pressure range for Peugeot 307 is between 40-80KPA. Intake pressure refers to the average absolute pressure in front of the intake valve during the engine cylinder's intake process. The intake pressure sensor, abbreviated as MAP (Manifold Absolute Pressure Sensor), is connected to the intake manifold via a vacuum tube. It senses the vacuum changes in the intake manifold as the engine's speed and load vary, then converts the internal resistance changes of the sensor into voltage signals for the ECU to adjust fuel injection and ignition timing. The main parameters of the intake pipe affecting engine intake performance are summarized as follows: intake pipe inlet diameter, intake manifold diameter, intake manifold length, and plenum chamber volume. Intake pipe inlet diameter: Determines the total intake volume and is set based on the throttle diameter. Intake manifold diameter: Determines the intake volume per cylinder and is set based on the intake port entrance diameter. Intake manifold length: Affects the dynamic effect. In intake pipe optimization calculations, this is treated as a target parameter for optimization. Plenum chamber volume: Affects the pulsation (resonance) effect. An appropriate plenum chamber volume not only enhances charging efficiency by utilizing the pulsation effect but also maintains a relatively stable pressure environment in the plenum chamber, providing favorable conditions for leveraging dynamic effects while eliminating interference between cylinders and improving intake uniformity.
18
3
Share

Where is the tow hook on the Changan CS55?

The installation position of the tow hook on the Changan CS55 is under the vehicle's bumper. The tow hook, also known as a car tow hitch, is used for towing purposes and serves as the vehicle's towing and traction device. It consists of an installation bracket, a ball-type tow hook, and a towing power module. How to use the tow hook: Locate the towing hitch positions at the rear of the towing vehicle and the front of the towed vehicle; after removing the cover on the bumper, assemble the included hitch; install the towing tool; the towing vehicle should start in 1st gear to ensure sufficient torque for adequate traction. Installation method for the car tow hook: Use a screwdriver to gently pry open the small square module and remove the cover; screw the tow hook clockwise onto the small module until it can no longer turn, indicating successful installation. Towing precautions: If the towed vehicle has brake issues or towing is required on icy roads, a tow bar should be prioritized; ensure the tow hook is securely fastened and properly installed, double-checking its stability before towing; plan the route carefully; choose a towing route with less traffic, better road conditions, and a shorter distance; avoid hazardous sections such as crowded areas, logistics centers, commercial districts, underground parking lots, etc., to reduce the risk of secondary accidents.
13
2
Share

Is Honda Engine the Best in the World?

Honda engine is the best in the world. Here is an introduction to Honda engines: Since Honda was founded in 1948, Honda's engine technology has indeed been at the forefront of the global engine field, covering 1.5L, 1.8L, 1.0T, 1.5T, 2.0L displacements, among others. The most classic is the 1.5L engine, which can produce 131 horsepower. The most famous engine technology is the "VTEC system" (Variable Valve Timing and Lift Electronic Control System). The "Earth Dreams" technology configuration includes: VTEC variable valve lift, variable intake manifold, VCM variable cylinder management, turbocharging, and more, earning countless praises. Consumers often joke that it's "buying an engine and getting a car for free."
15
2
Share

How to Install One-Key Start for Motorcycles?

First, check the constant power. With the mechanical key in the off position, locate the wire in the original ignition switch that has power, then directly connect it to the constant power wire of the one-key start system. Turn the mechanical key to the NO position, ensuring the entire vehicle is powered on. The wire in the original ignition switch without power is the starter motor wire, which should be connected to the one-key start system.
17
4
Share

Is the Focus Dual Clutch Really That Bad?

Ford Focus dual-clutch transmissions have a relatively high failure rate. Introduction to the Focus: The Focus is a Ford A-segment family sedan. It is equipped with an inline four-cylinder Duratec-HE reverse-mounted aluminum alloy engine, which is cast entirely from aluminum alloy and features a reverse-mounted design. The maximum power output is 104 kW, and the maximum torque is 180 N·m. Introduction to the Focus Dual Clutch: The Focus dual-clutch transmission is sourced from Germany's Getrag. It is a dry dual-clutch transmission that is prone to overheating during frequent gear shifts. The prolonged semi-engaged state in stop-and-go traffic can lead to risks of overheating, jerking, and oil leakage.
13
3
Share

Which is more durable, the Tiguan L or the CR-V?

CR-V is more durable. Power: The CR-V is equipped with a 1.5T engine, delivering a maximum power of 193 horsepower and a maximum torque of 243 Nm, paired with a CVT transmission. The Tiguan L is equipped with a 2.0T engine, delivering a maximum power of 186 horsepower and a maximum torque of 320 Nm. Body Dimensions: The latest top-trim Tiguan L measures 4716(mm) in length, 1859(mm) in width, and 1677(mm) in height, with a wheelbase of 2791(mm). The latest top-trim Honda CR-V measures 4621(mm) in length, 1855(mm) in width, and 1689(mm) in height, with a wheelbase of 2660(mm).
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.