How to Solve the Problem of Unable to Turn on High Beam in Mercedes-Benz Auto Mode?

What does it mean when the vehicle's eco light is green?

When the dashboard displays "eco," it indicates that the vehicle's economy mode is activated. Eco is an English abbreviation derived from Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further categorized into active eco driving mode and non-active eco driving mode. Eco mode is divided into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to enable it. When the driver presses the eco mode switch, the dashboard indicator light immediately illuminates, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active eco mode does not have a dedicated button. When the dashboard eco indicator light turns on, it serves merely as a reminder function. The eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most vehicles employ the active eco driving mode, meaning they have a dedicated switch button. Therefore, eco mode can be enabled during daily driving. However, it is unnecessary to enable eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of eco mode but also affect the vehicle's power. Additionally, eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, causing the eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and eco mode will not function in such scenarios.

20

0

Share

Where is the OBD interface of Foton View?

Foton View's OBD interface is located under the driver's seat. Open from behind the driver's seat to see the battery. The OBD connector is behind the battery and inside the battery box near the front of the vehicle. OBD stands for On-Board Diagnostics, which is a system that monitors the engine control system and other functional modules of the vehicle in real-time during operation.

11

5

Share

What are the causes of car water pump failure?

Car water pump failure causes: 1. Coolant leakage caused by aging water pump seals; 2. Over-tightened engine serpentine belt leading to premature wear; 3. Exceeding service life without replacement; 4. Bent pump shaft, worn shaft neck, or damaged threaded end; 5. Broken impeller blades or worn shaft bore; 6. Wear degree of water seals and bakelite washers; 7. Poor pump performance causing circulation issues that generate high temperatures, leading to leaks or broken blades; 8. Long-term antifreeze neglect causing internal corrosion that ultimately damages the pump.

19

4

Share

How to Clean an Oxygen Sensor?

Cleaning an oxygen sensor involves the following steps: 1. Remove the oxygen sensor from the vehicle; 2. Dissolve ferric chloride in water and mix it with hydrochloric acid; 3. Soak the oxygen sensor in the prepared solution for 10 to 15 minutes; 4. After soaking, wipe it clean with a clean cloth until the oxygen sensor turns white. The oxygen sensor is a critical feedback sensor in the electronic fuel injection engine control system, playing a key role in controlling vehicle exhaust emissions, reducing environmental pollution, and improving the fuel combustion quality of the car engine. Oxygen sensors are typically installed on the engine's exhaust pipe.

1

Share

What to Do When the Car Radar Doesn't Beep?

Solutions for when the car radar doesn't beep: First, check if the wiring connection at the bumper is intact; then check if the reverse lights turn on when shifting into reverse gear. If they don't, inspect whether the reverse light connection switch is faulty. Next, see if the computer displays any fault codes. If none of these issues are found, then check if the reverse radar itself is malfunctioning. Car radar is used for automobiles or other ground motor vehicles and includes various radars based on different technologies, each with different functions. Types of car radar: speed measurement radar, adaptive cruise control radar, collision avoidance radar, and other vehicle monitoring and control radars.

10

3

Share

How to Disable the Engine Immobilizer on a Cruze?

To disable the engine immobilizer on a Cruze, first disconnect the negative terminal of the battery for a period of time. Wait for the engine's protection data to clear, then reconnect it. Disconnecting the power for about 10 seconds should disable the system. The Cruze is a compact sedan produced by SAIC-GM Chevrolet, featuring a 4-door, 5-seat sedan body structure. Its tire specifications are 205/55R16, with a non-full-size spare tire. The parking brake type is electronic, the engine intake is turbocharged, the trunk volume is 430 liters, the curb weight is 1,310 kg, the engine model is L2E, and the displacement is 1.4 liters.

5

Share

How to Solve the Problem of Unable to Turn on High Beam in Mercedes-Benz Auto Mode?

What does it mean when the vehicle's eco light is green?

Where is the OBD interface of Foton View?

What are the causes of car water pump failure?

How to Clean an Oxygen Sensor?

What to Do When the Car Radar Doesn't Beep?

How to Disable the Engine Immobilizer on a Cruze?

Where is the engine of the Trumpchi M8 produced?

What Lights Should Be Turned On When Temporarily Parking a Vehicle in the Rain?

What is the battery model for the Volkswagen Touareg remote key?

What does oilchange mean when it appears on a car?