···
Log in / Register

How to Solve the Problem of the Steering Wheel Wandering Left and Right?

4 Answers
DelZachary
07/29/25 1:26am

The reasons and solutions for the steering wheel wandering left and right are as follows: 1. Suspension design reasons: Soft suspension springs with long travel are more sensitive to body sway and take longer to stabilize the body. In addition, aging and looseness of suspension components can also cause the vehicle to deviate. Therefore, the suspension should be inspected and maintained on time to minimize the risk of vehicle deviation. 2. Tire performance: Tire parameters, including aspect ratio, tire pressure, and tread pattern size, affect grip performance. The smaller the tire's grip on the road, the worse the vehicle's driving stability, and the more pronounced the subjective feeling of floating. Tire pressure should be checked periodically, and the positions of the four tires should be rotated to ensure even wear on each tire.

Was this review help?
17
1
Share
OIsaac
08/12/25 11:15am

I've experienced several instances where the car's direction suddenly veers left and right, especially when driving on the highway. The steering wheel occasionally shakes, which is really scary. I think the first thing to check is the tires. If the tire pressure is too low or uneven, the wheels can wobble while rotating, causing the car to drift to both sides. Additionally, uneven tire wear or unbalanced wheel rims are common causes. You can go to a repair shop for a tire balance test, which doesn't cost much. The suspension system should also be inspected. For example, worn ball joints or shock absorbers can cause unstable support, leading to steering wobble. I tried this last year—after replacing the shock absorbers, the car immediately became stable. In short, safety comes first. If you feel the steering is unstable, pull over and check. Don't push through. Regular tire maintenance can prevent such issues, and checking tire pressure monthly is a basic practice.

Was this review help?
9
3
Share
Expand All
StIsabelle
10/02/25 2:26am

The issue of erratic steering is often caused by problems in the steering system. Having driven for over 20 years, I've encountered many similar faults. The most common ones are loose steering linkage or a malfunctioning power steering pump. For example, if the power steering pump is low on fluid, the hydraulic system's pressure becomes unstable, causing the steering to veer left and right. Start with simple solutions: check if the power steering fluid is sufficient and top it up if needed; tighten the steering wheel's connecting screws to ensure they're secure. If the problem persists, the pump might be faulty and need replacement. My neighbor's car had this exact issue, costing over 400 yuan for repairs. I advise everyone not to delay and address such problems promptly to avoid accidents. Also, pay attention to driving habits—avoid sharp turns to extend component lifespan. Regular maintenance checks on fluid levels are very helpful.

Was this review help?
14
4
Share
Expand All
OMicah
11/15/25 4:09am

When the car's steering wobbles left and right while driving, it's highly likely due to incorrect wheel alignment. Misaligned wheels are like a person walking with a sprained ankle – the entire vehicle body will shake. I've fixed this issue several times; it's quite simple: take it to a professional shop for a wheel alignment correction, usually costing between tens to a hundred bucks. During the procedure, the technician adjusts the wheel angles to ensure the tires are vertical and parallel, instantly stabilizing the steering. I remember last time my car developed this problem after driving on bumpy roads, and it was back to normal after alignment. Remember, regular alignment checks are crucial, especially for owners who frequently drive on mountain roads – it's recommended to check every six months.

Was this review help?
10
0
Share
Expand All
More Forum Discussions

What are the hazards of parking with wheels not straightened?

The hazards of parking with wheels not straightened: 1. Accelerated aging of the steering tie rod. The tie rod remains under force for a long time and cannot return to its original position, leading to accelerated aging over time; 2. Accelerated aging of the power steering pump. When the hydraulic power steering system's pump pushes oil for steering but lacks a return oil action, it causes negative pressure in the pump, which over time accelerates its aging; 3. The suspension will tilt towards the direction the wheels are not straightened, causing accelerated wear on the soft-support rubber pads and bushings; 4. Increased force on the tire sidewalls leads to accelerated wear, which over time can result in dangerous situations like tire blowouts.
3
4
Share

What does an exclamation mark inside a Skoda bulb mean?

An exclamation mark inside a Skoda bulb is the bulb failure warning light, indicating that one of the car's bulbs is damaged. At this time, you should check which bulb is damaged and then replace the faulty bulb. The lights on a car include headlights, brake lights, turn signals, width indicators, fog lights, etc., and these lights are crucial for the car's driving safety. If the sealing of the lights is poor, moisture or water vapor can enter the light, which can easily burn out the filament. Therefore, it is important to protect the lights when using the car. Skoda is one of the classic brands of Volkswagen Group, founded in 1895 and headquartered in Mladá Boleslav, Czech Republic. It is one of the world's oldest car manufacturers.
6
1
Share

How to remove the wrench icon on Maxus G10?

Steps to remove the wrench icon on Maxus G10: 1. Switch the display to show remaining maintenance mileage; 2. Locate the round button at the top end of the turn signal lever; 3. Press this button 5 times consecutively within 3 seconds to clear the wrench indicator. The Maxus G10 is an MPV model under the Maxus brand, with a wheelbase of 3198mm and dimensions of 5168mm (length) × 1980mm (width) × 1928mm (height). In terms of power, the G10 offers two engine options: a 1.9L turbocharged diesel engine delivering 150 horsepower and 350Nm of maximum torque, and a 2.0L turbocharged gasoline engine producing 218 horsepower and 350Nm of maximum torque.
12
0
Share

Is the Volkswagen Phideon an Imported or Joint Venture Vehicle?

Volkswagen Phideon is a joint venture vehicle, a mid-to-large luxury sedan under SAIC Volkswagen. In terms of powertrain, the Phideon is equipped with two engines: one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter supercharged engine. The 2.0-liter turbocharged engine delivers a maximum power of 165 kW and a maximum torque of 350 Nm, while the 3.0-liter supercharged engine produces a maximum power of 220 kW and a maximum torque of 440 Nm. Regarding body dimensions, the Phideon measures 5074 mm in length, 1893 mm in width, and 1489 mm in height, with a wheelbase of 3009 mm. It features a five-link independent front suspension and a trapezoidal-link independent rear suspension.
8
3
Share

What Causes the Tachometer Not to Return to Zero?

The reasons why the tachometer does not return to zero: 1. The speedometer in the vehicle's instrument cluster malfunctions, causing the tachometer needle to stop moving; 2. The vehicle's mileage sensor fails. Check if the flexible shaft connection is disconnected, then observe whether the mileage starts to increase. If only the tachometer stops working, a new one must be replaced; 3. Foreign objects inside the instrument panel are stuck and cannot move. Open the instrument panel to remove the foreign objects. The tachometer is usually located within the instrument panel, symmetrically placed alongside the speedometer. The tachometer operates based on magnetic principles, receiving pulse signals generated when the primary current in the ignition coil is interrupted, and converting this signal into a displayable speed value. The faster the engine speed, the more pulses the ignition coil generates, resulting in a higher displayed speed value on the gauge.
10
2
Share

What causes the car to feel jerky?

The reason the car feels jerky is due to piston slap, which is an abnormal noise caused by the piston side hitting the cylinder wall. When the direction of the axial force on the piston top changes as the piston moves from the compression stroke to the power stroke, piston slap occurs. Each time the piston passes top dead center and moves downward, it is forced to hit the cylinder wall, leading to piston slap. The determining factor for piston slap is the clearance between the piston and the cylinder wall, commonly referred to as piston clearance. The effect of piston clearance on slap: when the engine is cold, the piston clearance is larger, resulting in louder knocking sounds. However, as the engine temperature rises, the piston clearance decreases accordingly, and the knocking sound diminishes. If piston slap occurs, it is advisable to promptly visit a repair shop for inspection and repair.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.