How to solve the problem of slow charging with the built-in USB in the car?

What are the reasons for the starter turning but the car not starting?

Possible reasons for the starter functioning normally but the engine failing to start include: 1. Presence of high-voltage spark, abnormal crankshaft position sensor or ignition coil; 2. Fuel pump malfunction, insufficient fuel pressure; 3. Clogged fuel injectors; 4. Ignition system being susceptible to moisture. Check for any of the following conditions: 1. Thoroughly inspect the fuel delivery system to ensure it provides adequate fuel to the injectors. Examine fuel supply components for partial clogs or blockages. 2. Nozzles of fuel injectors are partially clogged or blocked, or the solenoid valve is faulty. 3. When turning the ignition switch to the start position, the engine fails to start without any other symptoms. Such faults may occur due to: a) Worn-out keys or switches failing to engage the starter circuit; b) Starter relay not activating the starter solenoid switch circuit; c) Power switch not connecting the main circuit. 4. If the engine starts and runs in a warm, dry repair shop, the ignition system might be prone to moisture. When attempting to start the engine, spray water on ignition system components and wiring to check for startup issues or inability to sustain operation.

14

4

Share

What are the necessary maintenance items for the Emgrand at 20,000 kilometers?

For the Geely Emgrand at 20,000 kilometers, the maintenance generally includes replacing the engine oil, oil filter, air filter, cabin air filter, as well as components like coolant and spark plugs. Additionally, a comprehensive inspection should be conducted on the vehicle's lighting system, tires, chassis, various fluid levels in the engine compartment, and the onboard computer system. Car maintenance cycle: The maintenance cycle for motor vehicles is typically at 5,000 kilometers or 10,000 kilometers. Different brands of motor vehicles have different maintenance cycles. When performing vehicle maintenance, it is necessary to refer to the maintenance items listed in the user manual and the specific usage conditions of the vehicle to determine the relevant maintenance tasks. Importance of car maintenance: Maintaining your car ensures that the vehicle remains in optimal performance condition, ready for use at any time without worrying about technical issues; it effectively improves the vehicle's efficiency, reduces fuel consumption, and minimizes wear on parts and tires. For example, regular maintenance of the engine can prevent an increase in fuel consumption and even make it run more smoothly; it enhances driving safety by preventing sudden malfunctions during travel, thereby ensuring personal safety.

6

5

Share

Can an A2 License Drive a 19-Seat Coaster?

An A2 license can drive a 19-seat Coaster. The basis for an A2 license to drive such a vehicle: Holders of an A2 license can drive tractor semi-trailers, B1 (medium-sized buses), and B2 (large trucks). An A2 license allows driving medium-sized buses with a total length of less than 6 meters and seating for 19 or fewer passengers. It does not permit driving buses with a total length exceeding 6 meters; buses longer than 6 meters require an A1 license. Suitable vehicle types for an A2 license: An A2 license is primarily for tractor vehicles but also covers the vehicle types permitted under B1 and B2 licenses. Therefore, the types of buses an A2 license can drive are those that meet the B1 criteria. B1 permits driving passenger vehicles with a length of less than 6 meters and seating for fewer than 20 people. In other words, an A2 license can only drive buses that are less than 6 meters long and seat fewer than 20 passengers. Buses exceeding 6 meters in length or seating more than 20 passengers require an A1 license. A typical medium-sized bus that an A2 license can drive is the Toyota Coaster, which comes in models ranging from 10 to 23 seats, with the 19-seat version being the most common.

14

5

Share

How to Reset the Maintenance Reminder for Volkswagen Tiguan L?

There are mainly two methods to reset the maintenance reminder for the Volkswagen Tiguan L: The maintenance light reset can be performed using the universal diagnostic tool TECH2 for zeroing. Alternatively, manual reset can be done using the button on the right side of the instrument panel. The specific steps to reset the maintenance reminder for the Volkswagen Tiguan L are as follows: 1. With the engine turned off, press and hold the short-distance counter reset button located below the tachometer. 2. Turn the ignition switch to the ON position, then release the short-distance counter reset button. The display will show the "SERVICE" indicator. 3. Pull out the minute button on the clock and turn it to the right; the mileage will appear on the display. 4. Turn off the engine to reset the reminder message. 5. Turn the ignition switch to the ON position again, and the "SERVICE" indicator will disappear. The "SERVICE" indicator on the instrument panel display is a maintenance cycle indicator. When the ignition switch is in the ON position, the "SERVICE" indicator will flash, and it will disappear after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the maintenance light should be reset to zero.

14

3

Share

Does Engine Oil Cleaner Damage the Engine?

The harm of engine cleaner to the engine lies in its strong dissolving ability. If the owner uses the engine cleaner too frequently, it may cause certain damage to the internal seals and cylinder block of the engine. If a large amount of engine cleaner residue remains inside the engine after cleaning, it can also affect the balance of the oil composition, leading to degraded oil performance. More details are as follows: 1. Engine cleaner can have a certain cleaning effect when added to engines with low mileage, where carbon deposits are not severe and sludge accumulation is minimal. After cleaning, it can remove carbon deposits and sludge, enhance the fluidity of new oil, reduce engine temperature and noise, improve lubrication performance, reduce wear, and extend the engine's service life. 2. However, for vehicles with significant sludge accumulation, the cleaning effect of adding engine cleaner may not be very noticeable. During the cleaning process, the re-release and circulation of sludge may even lead to oil passage blockage, poor lubrication, or even bearing failure. Therefore, owners should assess their vehicle's condition before deciding to use engine cleaner. 3. For engine maintenance, owners should pay more attention to following the maintenance cycle specified in their maintenance manual and perform regular maintenance. Timely replacement or addition of oil is crucial. If the filter shows signs of blockage, it should be replaced promptly to avoid internal contamination and accelerated engine wear.

19

3

Share

Why is the engine malfunction indicator light on in the Baojun 510?

The reasons for the engine malfunction indicator light being on in the Baojun 510 are as follows: Poor combustion state: Poor combustion state is the main reason for the engine malfunction indicator light to come on. In automotive design, to ensure the engine is in good working condition and to guarantee its normal working lifespan, an oxygen sensor is installed to monitor the engine's combustion state. Once the combustion state is poor, it not only causes environmental pollution but also leads to fuel waste and excessive engine wear. Poor fuel quality: Many car owners who notice the engine malfunction indicator light on have experienced that the light suddenly comes on after filling up with a tank of fuel. This is because the engine has specific requirements for fuel quality indicators, especially as regulations on engines become increasingly stringent, demanding higher fuel quality standards. In reality, some gas stations may not fully comply with these standards to provide fuel suitable for high-performance engines, leading to frequent occurrences of the engine malfunction indicator light coming on. Dirty engine cylinder interior and accumulated carbon deposits: Over time, the engine interior inevitably accumulates carbon deposits. These deposits can alter the engine's design parameters and, due to their unstable nature and heat retention, can cause the engine to ignite irregularly, leading to engine knocking. In such cases, the engine malfunction indicator light will also come on.

7

0

Share

How to solve the problem of slow charging with the built-in USB in the car?

What are the reasons for the starter turning but the car not starting?

What are the necessary maintenance items for the Emgrand at 20,000 kilometers?

Can an A2 License Drive a 19-Seat Coaster?

How to Reset the Maintenance Reminder for Volkswagen Tiguan L?

Does Engine Oil Cleaner Damage the Engine?

Why is the engine malfunction indicator light on in the Baojun 510?

What is the maintenance interval for the Mazda CX-4?

Is the CFMOTO 250SR domestically produced?

How to Turn Off the Daytime Running Lights on a Camry?

What is the meaning behind the name Ferrari 488?