How to Solve the Problem of Repeatedly Burning Out Ignition Coils?

What are the functions of the various pulleys in an engine?

Engine pulleys serve the following functions: providing power source, enabling coolant circulation, supplementing electrical power, reducing cabin temperature, and adjusting tension. Crankshaft Pulley: Acts as the power source, with belt rotation driven by this pulley. Water Pump Pulley: Rotates to circulate coolant within the engine. Alternator Pulley: Rotates to drive the alternator, providing supplementary electrical power to the vehicle. Compressor Pulley: Rotates to operate the compressor, supplying low-temperature refrigerant to the air conditioning system to reduce cabin temperature. Tensioner Pulley: Ensures the belt operates with proper tension.

9

5

Share

How to Solve the Oil Burning Issue in Peugeot 408 1.8?

Peugeot 408 1.8 oil burning solutions are as follows: 1. Engine: Excessive wear of engine-related components can lead to excessive clearance, causing an excess amount of oil to splash onto the cylinder wall, far exceeding the oil ring's scraping capability. If the crankshaft bearing clearance is too large, oil will leak from one or more pressure-lubricated bearings. Replacing these main components can solve the issue. 2. Components: Improper assembly or failure of engine-related components can cause oil burning incidents. The main component, the valve stem seal, may fall off or age. Replacing the valve stem seal can resolve the problem. 3. Oil: Poor quality engine repairs or inappropriate selection of parts are one of the causes of oil burning. Replacing the parts or switching to high-quality oil can help.

3

1

Share

Can regular tires be used for cornering?

Regular tires cannot be used for cornering. Tires suitable for cornering: Theoretically, the tire with the largest contact patch when the bike is leaned over is the most suitable for cornering. This means tires with a certain curvature, where slick tires have the largest contact area. Therefore, slick tires theoretically provide the most friction because they have no tread patterns, maximizing the contact area. However, slick tires have a characteristic: they need to reach their optimal operating temperature to deliver the best grip. Therefore, semi-slick tires are generally used for cornering, as their softness is second only to slick tires but higher than regular tires. Tire maintenance: Make it a habit to check tire pressure before driving; visit a tire shop every two to three months to check tire pressure; according to the car maintenance manual, rotate four new tires every 10,000 to 15,000 kilometers.

6

0

Share

Can Airbag Control Modules Be Replaced with Used Parts?

Airbag control modules should not be replaced with used parts. The airbag is a crucial safety component in a vehicle, and using second-hand parts can easily lead to malfunctions, creating potential safety hazards. Airbag Working Principle: In the event of a collision, the vehicle's airbag system activates within an extremely short time frame. The ECU issues an ignition command, triggering the gas generator to release gas. The inflating airbag then bursts through its cover, forming a cushion that prevents the forward-moving occupants from hitting the steering wheel, dashboard, or other vehicle components. Airbag Precautions: Avoid placing objects in areas equipped with airbags, as the instantaneous force during deployment is extremely powerful. Airbags are passive safety devices and only provide optimal protection when used in conjunction with seat belts. Additionally, do not apply forceful impacts to areas where airbags are installed.

4

1

Share

Should You Use Low Beam or High Beam at Night?

When driving at night, it is sufficient to use low beams under good lighting conditions. There is a control lever on the left side of the steering wheel, which usually has a knob with at least two settings. Turning the knob to the first setting turns on the parking lights, turning it to the second setting activates the parking lights plus low beams, pushing the lever downward turns on the high beams, but you must first turn on the parking lights. Lifting the lever serves as a passing signal. The appropriate usage scenarios for high and low beams are as follows: Low Beam: When encountering oncoming vehicles, use low beams for safety and courtesy. High Beam: High beams can be used on highways or in rural areas without streetlights to expand the field of vision. However, when driving at low speeds, the engine generates insufficient power, and the battery is in a state of negative charge, which can affect its lifespan if high beams are used. Additionally, using high beams during low-speed nighttime driving increases fuel consumption.

12

2

Share

Why is the rear wheel handbrake not working?

Rear wheel handbrake not working is usually caused by severe wear of the handbrake brake pads, and replacing the brake pads appropriately will solve the issue. Below is some relevant information about the handbrake: Introduction to the handbrake: The parking brake, commonly referred to as the handbrake, functions to provide resistance when parking, preventing the car from rolling. The parking brake, also known as the handbrake or the parking gear in automatic transmissions, locks the drive shaft or rear wheels. The force of the parking brake is much weaker compared to the service brake, just enough to keep the car from rolling on a slope. Precautions when using the handbrake: Do not pull the handbrake to the highest position, as the handbrake system includes not only steel cables but also nylon ropes. If it is always pulled to the highest position, the nylon rope will quickly suffer from material fatigue.

13

5

Share

How to Solve the Problem of Repeatedly Burning Out Ignition Coils?

What are the functions of the various pulleys in an engine?

How to Solve the Oil Burning Issue in Peugeot 408 1.8?

Can regular tires be used for cornering?

Can Airbag Control Modules Be Replaced with Used Parts?

Should You Use Low Beam or High Beam at Night?

Why is the rear wheel handbrake not working?

What is the logo of the Volkswagen Phaeton?

What are the reasons for the air pressure gauge not pumping air?

What are the functions of all buttons in Changan Oushang?

Where to Handle Vehicle Transfer in Fuzhou?