How to solve the problem of non-working tail lights and fog lights on the Besturn B50?

1 Answers
OAngelina
07/29/25 11:47pm
Solution for non-working tail lights and fog lights on the Besturn B50: Check the fog light fuse. There are instructions inside the fuse box. Try replacing it with a fuse of the same amperage. If the fuse is not broken and the bulb is confirmed to be functional, inspect the wiring and the fog light switch. The Besturn B50 is a sedan independently developed by FAW. The car has a length, width, and height of 4615mm, 1785mm, and 1435mm respectively, with a wheelbase of 2675mm. The Besturn B50 has added a cornering light system, which automatically controls the cornering lights based on driving conditions and vehicle status changes. Additionally, it includes new safety features such as a reminder for the unfastened passenger seat belt, anti-whiplash seats, hidden airbags throughout the vehicle, central locking, and headlight level adjustment.
Was this review help?
10
1
Share
More Forum Discussions

Where is the central locking control box located in the Excelle?

The central locking control box in the Excelle is located beneath the center console. The central locking system refers to the central control door lock, which enhances both convenience and driving safety. The Excelle is a compact car under the SAIC-GM Buick brand, with exterior dimensions of 4468mm in length, 1765mm in width, and 1469mm in height, and a wheelbase of 2611mm. It features a 4-door, 5-seater sedan body structure. The Excelle is equipped with a 1.3L naturally aspirated engine, with an L-type cylinder arrangement and multi-point electronic fuel injection. It is paired with either a 5-speed manual transmission or a continuously variable transmission (CVT). The vehicle's suspension system consists of a MacPherson strut independent front suspension and a compound torsion beam non-independent rear suspension, with a front-engine, front-wheel-drive layout.
16
0
Share

What is the solution when the car's brake warning light comes on?

When the car's brake warning light comes on, the solution is to replace the brake pads. This situation occurs when the brake pads are severely worn. Brake pads come in two types: those with sensor wires and those without. When the brake pads wear down to the limit position, the sensor wire will automatically connect to the circuit, causing the warning light to illuminate. Brake pads, also known as brake linings, are critical safety components in the car's braking system. The effectiveness of all braking actions is determined by the brake pads, making high-quality brake pads the guardian of both the driver and the vehicle. Brake pads generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT4 oven temperature tracker to ensure the temperature distribution during coating meets quality standards.
9
5
Share

How to set the central control of the 2009 Teana to Chinese?

To set the central control of the 2009 Teana to Chinese, follow these steps: find the main menu on the steering wheel, go to settings, select service, choose language, and then change the language to Chinese. Below are the detailed specifications of the Teana: 1. Vehicle Positioning: The Teana is a mid-size sedan under Nissan, with a wheelbase of 2775 mm, and dimensions of 4930 mm in length, 1795 mm in width, and 1475 mm in height. 2. Powertrain: The Teana's 3.5-liter naturally aspirated engine delivers 252 horsepower and a maximum torque of 326 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. It is equipped with a continuous variable valve timing system and multi-point fuel injection technology, and features an aluminum alloy cylinder head and block. The engine is paired with a CVT transmission.
12
1
Share

Does the XPeng P7 have an ignition off button?

XPeng P7 does not have an ignition off button. Below are the specific details of the XPeng P7: 1. Vehicle Positioning: The P7 is a pure electric mid-size car with a wheelbase of 2998mm, and its length, width, and height are 4880mm, 1896mm, and 1450mm respectively. 2. Power System: The P7 comes in rear-wheel-drive and all-wheel-drive versions. The rear-wheel-drive version is a single-motor model, while the all-wheel-drive version is a dual-motor model. The single-motor model has a maximum power of 196kW and a maximum torque of 390 Nm. The dual-motor model has a combined power of 316kW and a combined torque of 655 Nm. 3. Suspension Type: The P7 uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
6
4
Share

Where is the engine number located on the Trumpchi GS4?

The engine number of the Trumpchi GS4 is located at the connection point between the engine block and the transmission. It typically consists of a combination of 7 to 8 digits and letters. In addition to the method mentioned above, the engine number can also be found through the following four ways: The vehicle's driving license displays the engine number, usually on the second-to-last line; The motor vehicle registration certificate records the engine number; The purchase invoice includes the engine number; The vehicle purchase tax payment certificate states the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and multiple engines can share the same model. The engine number, however, is the production serial number of the engine. Each engine has a unique number, and no two engines share the same engine number.
12
4
Share

Is it easy to have a flat tire if the side of the tire is gnawed?

Tire blowouts can occur if the side of the tire is gnawed. Here is an introduction about tires: 1. Tires are round, elastic rubber products assembled on various vehicles or machinery for ground rolling. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. 2. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperature effects during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. 3. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used in tire production, highlighting the significant rubber consumption by tires. 4. When purchasing new tires, ensure that the new tire's size, load range, speed rating, and construction type are the same as the original tires.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.