How to Solve the Problem of High-Speed Cars Being Prone to Tire Blowouts?
2 Answers
Solutions for high-speed cars being prone to tire blowouts are as follows: 1. Maintain a safe driving speed: On highways, keep a safe driving speed and be mindful to reduce speed when driving too fast. The probability of tire blowouts at 80–90 km/h is much lower than at 140–150 km/h. 2. Avoid pressing the brake pedal: Pressing the brake pedal can further destabilize the car, so be careful not to press it. 3. Do not suddenly release the accelerator pedal; instead, gradually ease off: Maintain the throttle input momentarily and release it slowly. 4. Try to keep the vehicle moving straight: Turning or steering the car is very dangerous. If the car veers to one side, it may be necessary to steer in the opposite direction to continue moving forward.
Having driven for decades, a high-speed tire blowout is truly nerve-wracking, so prevention starts at the source. Make it a habit to check tire pressure every two weeks, adjusting it to the recommended value on the door jamb—neither too high nor too low, especially during hot summer months when significant pressure fluctuations can easily cause blowouts. Also, keep an eye on tire wear; replace them when tread depth falls below 1.6mm, otherwise, the heat from high-speed rolling friction can lead to an instant blowout. I always make it a point to run my hand around the tires before highway trips to check for nails or cracks. For long journeys, try to avoid the midday heat, and avoid overloading the car—excess weight puts undue stress on the tires. A safety tip is to install a tire pressure monitor; it doesn’t cost much and alerts you to stop if pressure drops. During regular maintenance, technicians will check wheel balance and alignment—keeping these in check significantly reduces risks.
