How to solve the problem of Changan CS75 not starting?

1 Answers
AlyssaLee
07/29/25 9:46pm
Changan CS75 not starting can be solved by: 1. Check the spark plugs and replace them if necessary; 2. If it's caused by a dead battery, charge the battery; 3. If it's due to blocked fuel flow, place the vehicle in a warm environment or clean the fuel system; 4. If the ignition system is not working properly, unscrew the spark plugs and clean the oil stains between the electrodes; 5. If it's caused by valve sticking, drip some engine oil into the combustion chamber. Taking the 2021 Changan CS75 Glory Million Edition 280T Manual Elite as an example, its body dimensions are 4650mm in length, 1850mm in width, and 1715mm in height, equipped with a 1.5T turbocharged engine and a 6-speed manual transmission.
Was this review help?
17
5
Share
More Forum Discussions

What are the traffic rules for roundabouts with traffic lights?

At roundabouts with traffic lights, the basic rule remains to stop at red and go at green. The difference is that right turns are permitted when the light is red, allowing right-turning vehicles to exit the intersection directly while ensuring pedestrian safety. Additionally, when the innermost lane of the roundabout has a red light, vehicles are allowed to continue driving along the inner circle. Below are specific details: 1. When driving in a roundabout, always pay attention to road conditions and yield appropriately. If you are unfamiliar with the roundabout, slow down, observe road signs, and don’t panic if you miss an exit—since a roundabout is circular, you can simply go around again to find your exit. Key yielding principles include: vehicles entering the roundabout yield to those exiting; vehicles outside the roundabout yield to those inside; turning vehicles yield to those going straight; following vehicles yield to leading ones; and smaller vehicles yield to larger ones. 2. Proper use of turn signals in a roundabout: Before entering, if you intend to merge into the left lane within the roundabout, use the left turn signal to alert other drivers. When exiting, signal right in advance, check for safety, and gradually move from the inner lane outward before exiting. If the roundabout has multiple lanes, use turn signals when changing lanes. In summary, when entering a roundabout to turn left, use the left turn signal; always use the right turn signal when exiting.
6
0
Share

Is the Changan Yuexiang's engine the same as Suzuki's?

Changan Yuexiang and Suzuki engines are not the same. The main differences are as follows: 1. The Changan Yuexiang uses a Jiangling engine. This engine features a compact structure, reasonable layout, strong power, low fuel consumption, low noise, and high reliability, making it an ideal engine for domestic mini cars, passenger vehicles, trucks, and van-type transport vehicles. 2. The Changan Yuexiang is a compact car produced by Changan. As a global strategic model of Changan's self-owned brand cars, its overall body shape and proportions are designed based on the concept of sports cars, fully showcasing modern and dynamic design elements.
17
4
Share

How to Activate the Hazard Lights in a Manual Transmission Car?

Method to activate hazard lights in a manual transmission car: Press once to turn on, and press again to turn off when stopping. The hazard light button is typically red, prominently located on the center console, featuring a large white double-triangle border design. Hazard warning lights, also known as hazard flashers or emergency flashers, serve to alert, warn, and indicate during accidents or other emergency situations. Below are scenarios for using hazard warning lights: 1. Driving in fog: Due to poor visibility, both hazard lights and fog lights should be activated to alert passing vehicles and provide illumination. 2. Vehicle breakdown or accident on the road: Hazard lights should be turned on to warn other vehicles for safety. On highways, failure to use lights and set up warning signs properly after a breakdown or accident results in a 12-point penalty. 3. Towing a malfunctioning vehicle: Both the towing vehicle and the towed vehicle should activate hazard warning lights to indicate their abnormal status. 4. Temporary parking on the road: Turn on hazard lights to alert other drivers. 5. When forming a convoy permitted by traffic authorities: All vehicles in the convoy should activate hazard lights. 6. Visibility less than 100 meters: Activate fog lights, low beams, marker lights, front and rear position lights, and hazard warning lights. Speed should not exceed 40 km/h, maintaining a distance of at least 50 meters from the vehicle ahead in the same lane. 7. Visibility less than 50 meters: Turn on fog lights, low beams, marker lights, front and rear position lights, and hazard warning lights. Speed should not exceed 20 km/h, and exit the highway at the nearest opportunity.
1
1
Share

How often does Mercedes-Benz undergo a facelift?

Facelifts can be categorized into annual facelifts and mid-cycle facelifts. Below are the detailed descriptions: Annual Facelift: As the name suggests, it refers to the yearly updates of a product. Given that these are yearly updates, the changes are generally minor, typically involving adjustments to pricing and configurations. These adjustments are based on the automaker's continuous monitoring of the model's performance in the market after its launch. Mid-Cycle Facelift: The typical lifespan of a car model is approximately 5-6 years. During this period, if the minor updates introduced each year are likened to 'monthly tests,' then the so-called 'mid-term test' would be the mid-cycle facelift of the product.
10
0
Share

How to Remove the Brake Light on a Ford Focus?

Focus brake light removal steps: 1. Remove the cover plate: The brake light switch is located above the brake pedal, with a spring contact pressing against the pedal linkage. The cover plate is the base plate above the brake, clutch, and accelerator, fixed with three self-tapping screws and supported by two plastic clips inside. Metric hex keys are required to remove the self-tapping screws. 2. Disconnect wiring: After removing the cover plate, the brake light switch can be seen above the brake pedal. The switch connector is clip-type; gently squeeze the clips on both sides to easily pull it out. 3. Remove the switch: Grasp the switch and twist it to the left. 4. Remove the light: Take out the old light bulb.
17
4
Share

Why Can't the Volkswagen Sagitar Car Key Be Pulled Out?

Volkswagen Sagitar car key cannot be pulled out for the following reasons: The P gear is not truly engaged: In an automatic transmission, the P gear may appear to be engaged but hasn't actually triggered the electronic sensor. Obstruction by foreign objects: There might be coins or other items blocking the gear slot, preventing proper engagement. The owner should check for any obstructions in the gear slot and remove them; then start the car, shift gears again to ensure full engagement, and the key can be pulled out. Steering wheel not returned to position: If the steering wheel isn't returned to its original position when parking, it may cause abnormal locking. In such cases, while gently turning the key with the right hand, wiggle the steering wheel left and right with the left hand to release the key.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.