How to Solve the Problem of Car Sunroof Noise?

1 Answers
HavenDella
07/30/25 2:11am
Car sunroof noise can be resolved by: 1. Opening the sunroof fully and applying sealant conditioner; 2. Tightening the sunroof screws; 3. Removing dust with a towel; 4. Adding lubricant to the sunroof tracks. The main components of a car sunroof include: 1. Sliding mechanism; 2. Drive mechanism; 3. Switch buttons; 4. Control system. Maintenance methods for car sunroofs are: 1. Regularly check the condition of the sunroof tracks; 2. Reduce the frequency of sunroof usage; 3. Avoid opening the sunroof when the car is cold in winter; 4. Check the drainage condition of the sunroof before the rainy season.
Was this review help?
14
5
Share
More Forum Discussions

What is the fuel tank capacity of the Nissan X-Trail 2.5?

The fuel tank capacity of the Nissan X-Trail 2.5 is 65 liters. This model is equipped with a QR25 engine. The 2008, 2010, and 2012 versions use a 2.5L 184HP L4 engine, while the 2015 and 2017 versions use a 2.5L 186HP L4 engine, featuring a 2.5L naturally aspirated intake system. During actual refueling, the amount of fuel may exceed the nominal capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety level, with additional space from the safety level to the tank opening. This extra space ensures that fuel expansion due to temperature rise does not cause overflow. If fuel is filled up to the tank opening during refueling, the actual fuel volume will exceed the nominal capacity. Fuel tank maintenance includes: Draining accumulated water and sediment from the tank, and checking for leaks at fuel pipe connections and switches. For fuel tank caps with air and vapor valves, ensure the vent holes are clear. The fuel filler inlet screen should remain intact to prevent impurities from entering the tank and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel spillage while driving.
8
2
Share

How to Overcome Nervousness When Taking a Driver's License Test?

Practice more before the test to build confidence. Do stretching exercises at the test site to move your limbs and take deep breaths to relax and prepare for the test. After getting in the car, adjust your sitting posture, check the lights, adjust the rearview mirror, etc., and don't worry too much. The passing standards are as follows: 1. Traffic regulations and related knowledge (Subject 1), the full score is 100, and 90 or above is considered passing (including 90). 2. Field driving (Subject 2), real vehicle, only pass or fail. There are 9 mandatory test items (all without poles), including reversing into the garage, turning around on a narrow road, parallel parking, stopping and starting on a slope, turning at a right angle, driving on a curve, emergency braking, driving through a tunnel, and taking a card at a toll booth. All nine mandatory items must be passed to pass the Subject 2 test. 3. Road driving (Subject 3), real vehicle. The test is conducted with electronic monitoring + traffic police examination, making the road test more fair. Since January 1, 2013, when the new traffic regulations were implemented, the test has added items such as light usage, left and right turns, and passing through pedestrian crossings. After the road test, there is an additional theoretical test on safe and civilized driving knowledge. The difference from Subject 1 is that it adds image analysis and judgment. There are 50 questions in the test, each worth 2 points. The full score is 100, and 90 or above is considered passing.
4
2
Share

How to Install a Tire Pressure Monitor by Yourself?

Unscrew the dust cap of the tire valve, then slide on the dust cover, install the hex nut, mount the tire pressure sensor, and tighten the sensor with a nut wrench. This completes the installation of one tire pressure sensor. Unscrew the dust cap of the tire valve. Slide on the dust cover, install the hex nut, mount the tire pressure sensor, loosen the sensor with a nut, check for air leaks, and the installation is complete. Tire pressure monitoring mainly comes in two types: indirect tire pressure monitoring and direct tire pressure monitoring.
17
3
Share

What are the pros and cons of adding wheel spacers to a car?

Adding wheel spacers can improve stability during sharp turns. Below is an introduction to the advantages and disadvantages of adding wheel spacers: 1. Advantages of adding wheel spacers to a car: (1) For some models with unsatisfactory body posture, adding wheel spacers slightly protrudes the wheels, enhancing the vehicle's visual sense of power. Wide-body modified cars may appear to have recessed tires, and wheel spacers can perfectly solve this issue. (2) Adding wheel spacers increases the track width on the same axle, improving the vehicle's tendency to feel unstable or roll during high-speed driving and sharp turns. (3) Wheel spacers are usually made of aluminum alloy, so they do not add much weight. (4) When upgrading to larger brake calipers, wheel spacers can provide the necessary clearance. 2. Disadvantages of adding wheel spacers to a car: (1) On uneven roads, the vehicle may experience more severe bumps, which can damage the universal joints on the half-shafts. (2) The quality of wheel spacers varies, and if a spacer fails, it can also damage the original wheel hub. (3) One factor in vehicle suspension tuning is to reduce abnormal tire wear. Adding wheel spacers changes the track width, leading to abnormal tire wear. (4) The vehicle should not be heavily loaded, as mentioned in the third point, because it can cause abnormal tire wear and sometimes result in rubbing against the wheel arches.
2
1
Share

What does the 'trip' on the Volkswagen car dashboard mean?

The 'trip' on the Volkswagen car display refers to the trip mileage, measured in kilometers (KM). Here is more information about trip mileage: 1. Trip mileage is a driving parameter that can accurately calculate fuel consumption data and record the total kilometers traveled. 2. Trip mileage can calculate the amount of fuel used during driving and can also be used to measure fuel consumption at different speeds. 3. The trip mileage can be reset or calculated using the lever on the left side of the steering wheel. 4. The remaining distance that can be traveled with the current fuel can be calculated based on the trip mileage data.
12
5
Share

What Causes Low Tire Pressure in One Tire?

A tire with low pressure may be due to tire damage or aging. The details are as follows: Tire Damage: When a car tire is damaged, it will inevitably lead to air leakage, resulting in low tire pressure over time. If a tire is damaged, it must be repaired or replaced promptly to prevent safety hazards. Tire Aging: There are many reasons for slow air leakage in car tires, including natural aging of the tire or prolonged parking. When a car is parked for an extended period, it should be placed on a flat and hard surface to prevent the tire from deforming due to long-term compression.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.