···
Log in / Register

How to Solve the Problem of Buick Excelle Not Starting and Engine Malfunction Light On?

3 Answers
Ted
08/27/25 7:57am
Check the water temperature gauge and oil pressure warning light. If the water temperature gauge and oil pressure warning light are not alarming, the car can still be driven. At this time, be sure to control the speed and drive to the maintenance station for inspection in time. If the water temperature is too high or the oil pressure warning light is on, and you clearly feel that the vehicle has a malfunction, you should stop immediately and call for rescue. The sensor circuit on the engine is flooded, causing signal transmission distortion. You can drive the vehicle to a maintenance facility for inspection.
Was this review help?
8
5
Share
ErinRose
09/09/25 6:42am
That time my Buick Excelle wouldn't start and the engine warning light came on, it was really frustrating. I remember while waiting for roadside assistance, I first tried checking the battery: seeing if the lights were dim or if the horn sounded. If there was no sound, it might have been a dead battery, so I tried getting a friend to help with a jump start. If the light was still on, definitely don't force ignition—it could be the anti-theft system locking or the fuel pump failing. In my case, it was a sensor malfunction, and the mechanic replaced the part. I recommend avoiding random circuit modifications and getting the electrical system checked during maintenance to avoid last-minute failures. Safety first—if this happens, don't panic, just call a professional mechanic to check it out as soon as possible.
Was this review help?
14
5
Share
Expand All
CarterMarie
10/23/25 7:33am
As a car enthusiast, I have some knowledge about the Buick Excelle's system. If the car won't start and the malfunction indicator light is on, it's mostly because the ECU has detected an abnormality, such as an oxygen sensor issue or a clogged fuel injector. I once used an OBD scanner to read the trouble code, which showed P0171 indicating a lean fuel mixture. Try disconnecting the battery for a few minutes to reset the system; sometimes this can provide a temporary fix. But don't rely on this trick too much, as a common issue is aging ignition coils. Regular fuel system cleaning can help prevent problems. Pay attention to changes in fuel consumption while driving, as early detection and treatment of abnormalities can avoid greater losses.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

How to Deal with the Continuously Illuminated Tire Pressure Monitoring Light on Lavida?

Turn on the ignition switch, press and hold the SET button of the tire inflation pressure control system until the dashboard indicator light comes on. Wait for the system to confirm the storage of new parameters, and the tire pressure monitoring light will automatically turn off, completing the reset. Below are the specific methods to eliminate the tire pressure monitoring light: 1. First, turn off the engine, then turn on the power for vehicle self-inspection. Press and hold the tire pressure monitoring button on the right front side of the gear shift lever for about three seconds until you hear a "ding" sound. Release the button to eliminate the tire pressure warning light on the dashboard. 2. If the light cannot be eliminated, visit a Volkswagen after-sales service center. Have the staff check the tire pressure and related systems such as sensors. After confirming there are no faults, use a specialized decoder to clear the tire pressure warning light on the vehicle.
18
2
Share

What does the engine fault light EDC mean?

EDC fault light indicates that there is a problem with the engine electronic control system, reminding the owner to go to the repair shop for inspection and maintenance as soon as possible. Here is some information about EDC: 1. The full name of EDC is Electric-Diesel-Control, which means electronic control system for diesel injection; its task is to electronically control the fuel injection system to achieve real-time control of fuel injection quantity and timing according to operating conditions. 2. When EDC appears on the car dashboard, it indicates an engine fault. When the EDC fault light comes on, it means there is a problem with the engine.
7
0
Share

What is the principle of car tire pressure monitoring?

Car tire pressure monitoring principle depends on the type of monitoring device, specifically introduced as follows: 1. Direct tire pressure monitoring: Uses pressure sensors installed inside the tires to measure air pressure, and wireless transmitters to send pressure information from inside the tire to a central receiver module. 2. Indirect tire pressure monitoring: When tire pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller. By comparing rotational speed differences between tires, it achieves the purpose of monitoring tire pressure. 3. Functions of tire pressure monitoring: Prevent accidents; Extend tire service life.
9
1
Share

What to Do When the Car Key Won't Come Out?

When a car key won't come out, it's not necessarily a malfunction. There are two common scenarios: first, the key won't come out after turning off the engine; second, the key can't be turned after insertion. Here are the details: 1. Key won't come out after turning off the engine (common in automatic transmission models): In this case, the owner should check if there's any obstruction in the gear slot. Remove the obstruction, start the car, shift the gear again to ensure it's fully back in place, and then the key can be pulled out. 2. Key can't be turned after insertion: This is actually the car's automatic steering wheel lock function, a simple anti-theft feature. To resolve this, turn the key forcefully with your right hand while gently shaking the steering wheel left and right with your left hand, and the key will turn.
1
3
Share

What are the effects of overfilling engine oil?

The effects of overfilling engine oil are: 1. Intense agitation between engine components, leading to excessive engine load and power loss; 2. Oil splashing onto cylinder walls and entering the intake system through the crankcase ventilation system, causing oil burning issues. The method for changing engine oil is: 1. Lift the vehicle with a jack, locate and loosen the drain plug to drain the oil; 2. Remove the oil filter and place a container beneath it; 3. Install a new oil filter and add fresh oil. The functions of engine oil are: 1. Reduce friction and high temperatures; 2. Cool down the engine; 3. Clean and remove contaminants; 4. Dampen vibrations; 5. Prevent rust and corrosion.
2
3
Share

How to Replace the Spark Plugs of Chery Tiggo 3?

Chery Tiggo 3's spark plug replacement method is as follows: 1. Clean the dust around the engine cylinder wires to prevent dust from entering the engine during replacement; 2. Use a wrench to loosen the spark plugs in the engine, remove the old spark plugs, then install the new spark plugs and screw them back in. The Chery Tiggo 3 is a compact SUV with the following dimensions: length 4420mm, width 1760mm, height 1670mm, wheelbase 2510mm, fuel tank capacity 55 liters, and trunk capacity 550 liters. The Chery Tiggo 3 is equipped with a 1.5L naturally aspirated engine with a maximum horsepower of 116.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.