How to Solve the Oil Burning Issue in Nissan X-Trail?

1 Answers
DiAaron
07/29/25 11:53pm
Piston rings stuck in the ring grooves due to carbon deposits. The solution is to replace the piston rings if necessary. Using unqualified engine oil or not changing the oil for a long time can cause the oil to become too thin and not burn completely. This can also be caused by starting the engine with a heavy throttle when cold, poor quality of the air-fuel mixture participating in combustion, or failure to replace a aged and damaged air filter.
Was this review help?
19
1
Share
More Forum Discussions

What is the standard tire pressure for the MG 5?

The standard tire pressure for the MG 5 is approximately 2.4-2.5 bar. Generally, the recommended tire pressure for a car can be found on the label at the bottom of the driver's side B-pillar. Normal tire pressure reference standards: According to the international GBT2978-2008 standard, the tire pressure for standard tires is around 2.4-2.5 bar, while reinforced tires have a tire pressure of about 2.8-2.9 bar. Seasonal changes should also be considered when adjusting tire pressure. In winter, the standard tire pressure should be slightly increased by about 0.2 bar, while in summer, the tire pressure can be set slightly lower than the standard, usually by about 0.1 bar, to prevent blowouts due to high temperatures. Daily tire pressure considerations: Most cars are equipped with a tire pressure monitoring system that alerts the driver to leaks or abnormal tire pressure to ensure driving safety. It is important to regularly check the tire pressure monitoring light on the instrument panel, as both underinflated and overinflated tires can affect driving performance and increase tire wear.
17
3
Share

Can a Car Charge the Battery by Idling Without Driving?

When a car is started but not driven, the battery can still be charged. Operating Principle: The car battery begins charging once the engine is started. The battery is charged by the car's engine. After the car is started, the alternator begins working, receiving power from the engine via the belt. As long as the engine is running, the car battery remains operational. During driving, the faster the engine speed, the more electricity the alternator generates, increasing its output. Precautions: There is another charging method for car batteries called slow charging, which takes 10-15 hours. Deeply discharged batteries must undergo slow charging; otherwise, insufficient charging time and inadequate charge will directly affect the car's driving performance. Lifespan: After prolonged use or multiple excessive charge-discharge cycles, the lifespan of a car battery decreases, affecting vehicle performance. At this point, a car battery tester should be used to measure the specific remaining lifespan percentage to determine whether the battery needs replacement.
3
0
Share

What does tank turn mean?

Tank turn is a feature of a vehicle that reduces the turning radius, allowing the vehicle to turn almost in place. Here is a detailed introduction to tank turn: 1. Working principle: The principle is to control the tracks on both sides to drive in opposite directions, enabling the tank to pivot around its center point and achieve an in-place turn. Alternatively, one track can be locked while the other continues to drive normally, allowing the tank to turn around the locked track as the pivot point. 2. Function: It can significantly reduce the vehicle's turning radius, improve its off-road capability, enhance mobility and flexibility, and increase its survival chances on the battlefield.
18
3
Share

What does the TC slash yellow light mean?

The TC slash yellow light in a car does not indicate a vehicle malfunction; it signifies that the traction control system is turned off. Below is relevant information about the TC slash yellow light: 1. Meaning: TC stands for Traction Control, which enhances the vehicle's passability. When the ABS anti-lock braking system detects wheel slippage, it applies braking to the slipping wheel to prevent loss of traction, ensuring optimal traction under various driving conditions. 2. Conditions for the indicator light: (1) On certain configured models, this light briefly illuminates when the engine starts. If the system is functioning normally, the light will turn off. For vehicles equipped with a high-end combination instrument panel, this light is located in the display area and may not illuminate when the ignition is turned on. (2) This light also illuminates if the StabiliTrak electronic stability control system is turned off. For safe driving, it is recommended to keep these assistance systems enabled.
13
5
Share

Can a Vehicle Charge Its Battery When Idling Without Moving?

Vehicle idling without moving can charge the battery. However, it is necessary to ensure that all electrical appliances (except for the engine operation) are turned off, so that the battery can be charged. Reasons why it can charge: When the car battery is charging, it can be charged by the rotation of the engine. As the engine runs, the belt drives the generator to produce a charging current. The current passes through the vehicle's voltage regulator transformer, and part of the filtered current is used for the vehicle's operation, while the excess part is used to charge the onboard battery. Precautions for onboard charging: The USB port inside the car is set up for audio data transmission, and most vehicle ports only have a 5V current, which is insufficient and may damage the charging device if not up to standard; the output current of the car charger should not exceed the maximum rated input power of the phone; after the car is turned off, the car charger must be unplugged. If the car charger is not unplugged, it may damage the battery after the vehicle is turned off.
9
5
Share

When is the best time for a car's first maintenance?

Car first maintenance is generally required at around 5,000 kilometers/6 months. The initial service includes minor and major maintenance. Minor maintenance involves changing the engine oil and oil filter, while major maintenance covers engine oil, oil filter, air filter, and fuel filter. Below are details about major maintenance items: 1. Air filter: The engine inhales a large amount of air during operation. If the air isn't filtered, dust particles can accelerate wear on piston groups and cylinders. Larger particles entering between pistons and cylinders may cause severe "cylinder scoring." The air filter's role is to remove dust and particles from the air, ensuring sufficient clean air enters the cylinders. 2. Fuel filter: The fuel filter provides clean fuel to the engine by filtering out water and impurities from gasoline. This optimizes engine performance and offers maximum protection. During maintenance, technicians will conduct additional inspections based on the vehicle's condition and may include other service items such as engine system cleaning, tire alignment checks, and inspection of various fasteners.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.