···
Log in / Register

How to Solve the Noise Problem of Honda XR-V?

4 Answers
VanEmiliano
09/03/25 2:41am

Honda XR-V can eliminate noise through the following methods: 1. Vibration reduction: Every car is manufactured using metal and plastic sheets, which generate resonance during driving, causing a large amount of low-frequency noise. The original factory also processes some vibration sound sources, but it is far from enough. Therefore, whether it is a high-end car or a mid-to-low-end car, it is necessary to install vibration damping materials. 2. Sound absorption: When the car is driving at high speed, the body itself produces resonance noise. Adding high-efficiency sound-absorbing cotton can reduce noise. 3. Sound insulation: Due to the thin metal and plastic sheets of mid-to-low-end cars, external noise is transmitted. Installing sound insulation and thickening sheets can block the noise.

Was this review help?
3
3
Share
DeRebecca
09/15/25 4:26am

My XR-V also had noise issues before, and it turned out to be caused by uneven tire wear. You'd better first check if the tire tread depth and tire pressure are normal. Generally, 2.3 for the front tires and 2.1 for the rear tires are appropriate. If the noise increases when driving on highways, it's most likely a tire issue, and you might consider switching to quiet tires. Aging engine mount bushings can also cause a humming sound, especially for cars over three years old. Last time I replaced the bushings, it only cost a little over 300 yuan including labor, and the effect was immediate. Loose underbody panels are also a common source of noise, especially noticeable when going over speed bumps. You can check this by getting down and shaking them yourself.

Was this review help?
17
2
Share
Expand All
LaZachary
10/29/25 5:05am

As a regular at auto repair shops, I typically approach XR-V noise issues in three steps. First, rule out the easiest fixes, like rattling items in the trunk or glove compartment caused by human factors. Then focus on mechanical components, paying special attention to when the noise occurs: engine mount issues often appear at idle, exhaust system looseness during acceleration, and suspension problems when turning. Always check the wheel bearings - rotating the tires by hand can reveal grinding sounds indicating issues. If the cause remains elusive, I recommend full vehicle soundproofing upgrades. Though costing 5,000-6,000 RMB, they're particularly effective against road and wind noise.

Was this review help?
18
4
Share
Expand All
SanLeonardo
12/12/25 5:17am

My XR-V has over 50,000 kilometers on it, and the most effective way to deal with noise is regular maintenance. Be sure to change the engine oil every 5,000 kilometers, as poor-quality oil can significantly increase engine noise. Replace the air filter frequently, as a dirty one can cause whistling sounds due to restricted airflow. For window squeaks, I have a little trick: spraying dashboard wax into the rubber seal gaps works wonders. Door creaks are usually due to lack of grease on the door stoppers—applying some grease solves it. If you hear squeaking from the chassis on rough roads, it's likely the stabilizer bar bushings are worn out, and replacing them only costs a few dozen yuan. Remember these routine maintenance points, and you can avoid over 80% of noise issues.

Was this review help?
14
5
Share
Expand All
More Forum Discussions

How to lubricate a squeaky clutch?

Methods for lubricating a squeaky clutch: 1. Noise caused by dry friction: Simply apply a small amount of grease to the springs and areas where friction occurs. 2. Damaged release bearing: Try applying grease to the bearings on both sides of the release shaft, clutch pedal shaft, universal joint, transmission spline shaft, shock absorber lower bracket, gearshift lever support, brake clearance adjustment arm, water pump bearing, fan bracket grease nipple, and leaf spring pin. Additional relevant information is as follows: Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission.
8
5
Share

Why Can Only 80% of Tire Insurance Be Claimed?

Tire insurance can only be claimed at 80% for the following reasons: Quality Guarantee Insurance: Quality guarantee insurance refers to liability caused by product quality issues. According to national regulations, tires are considered consumables, and individual damage is not covered by (any insurance company's) compensation scope. Therefore, they cannot be compensated, and there are no additional insurance options. However, if the issue is related to quality, at most, only 80% can be claimed. Liability Insurance: Liability insurance refers to the insured's responsibility to third parties. For example, human intervention causing a tire blowout is merely a 'single damage.' Many insurance companies do not have such a claim item, so no compensation is required.
9
3
Share

How thick is the top of the rear bumper?

The top of the rear bumper is generally less than two millimeters thick. Function of the rear bumper: The rear bumper is a crossbeam located below the taillights. In addition to maintaining its original protective function, the front and rear bumpers of a car also aim to achieve harmony and unity with the vehicle's body shape, as well as pursue lightweight construction. Nowadays, most car bumpers are made of polypropylene plastic. Manufacturing process: Generally, bumpers are made of modified PP material due to its advantages of balanced plasticity and rigidity, lightweight and thin properties, and low cost. Some bumpers made of other materials (such as fiberglass, carbon fiber, etc.) may be phased out due to poor environmental performance (non-recyclable) or high costs. Therefore, in the coming years, modified PP materials and increasingly mature thermoplastic elastomers (TPO) will dominate the production of car bumpers.
3
0
Share

Where is the engine of Changhe Q7 from?

BAIC Changhe Q7 is equipped with a 1.5-liter turbocharged engine across the entire lineup. Below is expanded information about BAIC Changhe: Engine of BAIC Changhe Q7: The 1.5-liter turbocharged engine in BAIC Changhe Q7 delivers 150 horsepower and a maximum torque of 200 Nm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head. It is paired with either a 6-speed manual transmission or a CVT transmission. Configuration of BAIC Changhe Q7: BAIC Changhe Q7 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The CVT transmission paired with its engine is a structurally unique type of transmission. Inside the CVT transmission, there are two cone pulleys and a steel belt. The steel belt can move along the cone pulleys, allowing the transmission to vary speed and torque.
7
1
Share

What Does It Mean If the Radiator Frame of a Used Car Has Been Altered?

If the radiator frame of a used car has been altered, it indicates that the car has been involved in an accident. If only the radiator frame or some energy-absorbing collision components were damaged, and the overall condition of the vehicle is good without any damage to structural components like the frame rails, there should be no safety hazards or impact on driving performance. In such cases, the car is within an acceptable range, and purchasing a vehicle with a replaced radiator frame is reasonable. Below is some relevant information about radiator frames: 1. Material: There are three types of radiator frame materials available in the market: plastic, iron, or alloy. 2. Classification: Based on structure, they can be divided into integrated and segmented types. The integrated type is the most common form in the market, sometimes referred to as a "dragon gate frame." The segmented type is generally divided into three sections, connected via bolts or welding points.
1
3
Share

What is the brightness of halogen headlights?

Brightness The brightness of halogen lamps is 55W. Structure of halogen headlights: Halogen headlights are the most common type of car lights, and there's a reason they are so widely used—simple structure, low cost, and strong penetration. However, due to their low luminous efficiency, they are relatively dim and generate a lot of heat, earning them the nickname "candle lights." Advantages and disadvantages of xenon headlights: The advantages are high brightness, long lifespan, and low power consumption. The disadvantages include poor penetration and a certain warm-up time required to reach maximum brightness. Additionally, it's important to note that xenon lights are excessively bright and can easily affect the vision of oncoming drivers, so installing xenon lights must be accompanied by the installation of lenses!
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.