How to Solve the Low-Speed Jerking in BMW 5 Series?

1 Answers
DeLorenzo
07/29/25 4:16pm
It is normal for the BMW 5 Series to experience slight jerking. If the sensation is particularly noticeable, it is usually due to clogged fuel lines, irregular ignition, or persistent dirt and impurities inside the engine. Timely maintenance and repair can resolve these issues. Other causes of jerking include: 1. Upshift Jerking: The transmission's response speed is not fast enough, and the upshift speed cannot keep up with the throttle input, resulting in a jerking sensation during gear shifts. 2. Downshift Jerking: Due to the intervention of the energy recovery system, once the driver releases the throttle pedal or presses the brake pedal, the generator immediately starts working, placing a load on the engine. This affects the engine speed, causing it to become out of sync with the clutch plate speed, leading to a jerking sensation.
Was this review help?
19
4
Share
More Forum Discussions

What is the New Energy Vehicle Subsidy Policy?

2018 The new energy vehicle subsidy policy was officially implemented on June 12, 2018. The transition period was from February 12, 2018, to June 11, 2018. The new policy stipulates that the subsidy amount for new energy vehicles is not only based on the driving range but also takes into account two important factors: battery energy density and vehicle energy consumption. Relevant details are as follows: 1. Subsidy content: During the transition period, new energy passenger vehicles and new energy buses registered during this period received subsidies at 0.7 times the 2017 subsidy standard; new energy trucks and special-purpose vehicles received subsidies at 0.4 times the standard, while the subsidy standard for fuel cell vehicles remained unchanged. It is also important to note that, in addition to national subsidies, local governments may provide additional subsidies. According to national regulations, local government subsidies per vehicle must not exceed 50% of the central government's subsidy per vehicle. 2. Subsidy standard reduction: During the "13th Five-Year Plan" period, the government implemented subsidy policies for pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles, with subsidy standards gradually decreasing each year. Specifically: the subsidy standard for 2017-2018 was reduced by 20% compared to 2016, the subsidy standard for 2019-2020 was reduced by 40% compared to 2016, and after 2020, the subsidy policy was completely phased out.
8
2
Share

Is It Worth Buying a Used Car?

If the car has been well-maintained, it is worth purchasing. Generally, used cars that are 3-5 years old offer the best value for money, while those aged 6-8 years have the advantage of being more affordable, making them suitable for classic models. Cars older than 10 years are not recommended due to poorer condition and higher maintenance costs. The details are as follows: 1. Calculation Method: The used car market widely adopts the "10-year depreciation" method. For a new car, the depreciation is calculated as follows: the first 3 years at 15% annually, the next 4 years at 10% annually, and the final 3 years at 5% annually. 2. Depreciation: The first 3 years see the highest depreciation. For example, a car originally priced at around 100,000 yuan would be worth approximately 85,000 yuan after one year (an 85% resale value). After two years, it would depreciate further to 72,250 yuan (85% of 85,000 yuan), and by the third year, it would be worth 61,450 yuan. In terms of depreciation ratio, a 3-year-old used car offers the highest discount and represents the most cost-effective option.
18
3
Share

What Does Commuter Vehicle Mean?

Commuter vehicles, also known as lazy cars, refer to transportation tools and aids primarily used for commuting purposes. In China, they can sometimes refer to commuting cars, electric bicycles, electric scooters, two-wheel self-balancing scooters, or unicycle balancing scooters. The following are precautions for battery maintenance of commuter vehicles: 1. Drive according to road conditions: Mainly, avoid bumpy roads as much as possible. When going uphill, crossing bridges, or driving against the wind with heavy loads, be sure to slow down. This helps avoid excessive current discharge from the battery, reduces impact damage to the battery, and also enhances the battery's range and lifespan. When driving a commuter vehicle in winter, try not to maximize the horsepower to avoid power shortages caused by reduced battery capacity in low temperatures, which also helps extend the battery's lifespan. 2. Charge promptly: Never store a commuter vehicle in a discharged state. Storing the battery in a discharged state can easily lead to sulfation, where lead sulfate crystals adhere to the plates, blocking ion channels and resulting in insufficient charging and reduced battery capacity. The longer the battery remains idle in a discharged state, the more severe the damage. Therefore, even when the commuter vehicle is not in use, it should be charged once a month to maintain the battery's health. 3. Avoid high-current discharge: When starting, carrying passengers, or going uphill, try to avoid instantaneous high-current discharge. High-current discharge can easily lead to the formation of lead sulfate crystals, thereby damaging the battery's physical performance.
2
4
Share

What are the hidden features of the 2017 X-Trail?

1. One-touch window control for the driver's seat: With the vehicle powered on, pull up the driver's side window switch until the window is fully closed and hold for 5-10 seconds to complete the one-touch window setup. 2. Auto-lock function setup: Enter the car and close the door. Without pressing the brake, press the power button twice, then press and hold the lock button for 5-10 seconds. The hazard lights flashing indicates the setup is complete. Repeat the operation to disable. 3. Battery discharge protection: After parking and turning off the engine, and completely closing the doors, the vehicle will automatically cut off power supply after 1 hour in ACC state to prevent excessive battery discharge. 4. Remote headlight control: For example, if you need the car's headlights to illuminate your way home, you can leave the doors unlocked and the headlights on. Once home, simply lock the doors with the remote key, and the headlights will turn off simultaneously. 5. Vehicle locator: Press and hold the lock button, and the vehicle will emit a sound. 6. Window control after engine off: Within 30 seconds of turning off the engine, you can still operate the windows without opening the doors. 7. Auto-relock: After unlocking with the remote key, if the doors are not opened within a certain time, the vehicle will automatically relock.
10
1
Share

What kind of paint is the black paint on the Lynk & Co 03?

The black paint on the Lynk & Co 03 is metallic paint. Automotive metallic paint contains fine aluminum particles in its paint base. When light hits these aluminum particles, it is reflected back through the paint film, creating a sparkling metallic appearance. By altering the shape and size of the aluminum particles, the level of metallic sparkle in the paint can be controlled. Additionally, a clear coat is applied over the metallic paint for protection. Below are some methods for protecting automotive paint: 1. Waxing: Waxing can be done directly or after polishing. Direct waxing involves cleaning the car body and applying wax directly to the clear coat layer. Polishing waxing, on the other hand, requires using a polishing machine to buff the paint surface before applying wax, which immediately gives the car a shiny appearance. 2. Glazing: Due to the composition of the glaze, it is not resistant to acid or alkaline cleaning and can be easily damaged. The effects typically last only 1 to 3 months. Additionally, glazing can harm the paint, requiring reapplication every two to three months. 3. Crystal Coating: Crystal coating is a hard protective layer specifically designed for automotive paint, seats, interior and exterior trim, glass, tires, and other key areas. It comes in fast-drying and slow-drying types, primarily determined by its main components. 4. Film Application: Automotive film coating is a high-level protective measure that enhances the brightness of the paint while also providing resistance to acids and alkalis, high temperatures, strong waterproofing, oxidation resistance, UV protection, and other multiple effects.
9
1
Share

Where is the VIN located on the 10th generation Accord?

The VIN of the Accord can be found in the following three places: under the front windshield on the driver's side, on the vehicle registration certificate (new certificates list it as "VIN"), and in other locations such as insurance documents, various plates in the engine compartment, and the driver's side door pillar. 1. Other locations: When registering a vehicle, the engine number and VIN are required. These numbers must be imprinted on special tracing paper and submitted to the vehicle management office for registration to prevent illegal modifications and theft. If the VIN or engine number is damaged or becomes illegible due to external reasons, retain relevant evidence and promptly update the registration. 2. Additional information: According to 2019 regulations, the following three types of vehicles cannot be registered: Vehicles that do not meet emission standards cannot be registered. In recent years, domestic emission requirements have become increasingly strict, reflecting the national strategy of environmental sustainability. Vehicles with mismatched information cannot be registered. If the vehicle identification number is incorrect or the vehicle has been tampered with or stolen, it cannot be registered. This situation often occurs with used cars, so extra caution is advised when purchasing a used vehicle. The Phase III emission standard has been phased out, and the Phase VI standard is now in effect. Therefore, vehicles meeting the Phase III standard must undergo scrapping procedures.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.